Used Edm Die Sinking Machine for sale (67,095)

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. Ndedpfx Ajztn Nwsiysa It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame Nodpfx Ajztn Nqjiyjda – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving Nodsztn Nkepfx Aiysda – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake Ndsdpfxoztn I Ho Aiyea – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Njdpfoyxfqrsx Aiyjda Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Sinker EDM machine – in excellent technical and visual condition The machine has undergone a comprehensive and professional overhaul at our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Sinker EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Njdpsyrqpfefx Aiyoda Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 1

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Ndedpfx Aiexv Si Tjyja Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Excellent condition ! "Your Next Reliable Production Machine Starts Here"

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ndodpsw Uhrijfx Aiyea Excellent Condition ! "Your Next Reliable Production Machine Starts Here"

Condition: used, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 4,000 kg, table width: 700 mm, table length: 1,100 mm, Capacity: 120 Amp. – 19 kVA X-travel: 800 mm Ndjdpfx Aisyg Hpdoyea Y-travel: 600 mm Z-travel: 400 mm Table size: 1.100 x 700 mm Distance Head to table: 950 mm (max) Oil tank: 1.700 x 1.000 x 650 mm Weight of workpiece: 4.000 kg (Max) Controller: CNC Datic S120

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. Nsdpfezph N Aex Aiyjda The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FN10/12-80 Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm Ndjdpfxjwi T U To Aiyea output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Make: MENN Type: GW32 Constr. year: 1973 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Njdpfxezwqh Rs Aiyeda Location: In our warehouse

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Njdpfxju Iucuo Aiysda Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Ndjdpfx Aozmu I Teiyja Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit Nsdpfx Asy H U Uieiyoda - 6 UV drying units (air-cooled) - Rotary die-cutting unit - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print image monitoring The scope of delivery also includes a rotary die-cutting unit for the back side; this can be used in place of the flexo coating unit. Full rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine Ndodpfx Aijzt Nbzoyja - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 Ndodpfeik Hb Tjx Aiyoa The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is!

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Ndedjwi Ti Ropfx Aiyea Machinetype: thread rolling machine - flat die Make: MENN Type: GW52 Constr. year: 1974 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, Equipment: cooling unit, documentation/manual, Special Offer – 5% Discount Available! EDM32 Wire EDM Machine The EDM32 Wire Electrical Discharge Machine is a precision CNC machine designed for electro-erosion machining of electrically conductive materials. It is an ideal solution for toolmaking, mold manufacturing, and the production of precision components requiring high dimensional accuracy and excellent surface finish. The machine efficiently cuts complex profiles and intricate geometries in both single-piece and serial production. Its rigid construction and optimized machining parameters ensure reliable performance, excellent repeatability, and high productivity. The EDM32 supports taper cutting up to ±6°, allowing greater machining flexibility. It uses wire diameters from 0.12 to 0.25 mm, enabling highly accurate machining of demanding workpieces while achieving a surface finish of 1.6–2.5 Ra, minimizing the need for secondary finishing operations. With a maximum table load of 400 kg, the machine is capable of machining heavy workpieces without compromising precision. Main Features * High-precision wire EDM machining * Suitable for complex profiles and intricate geometries * Taper cutting up to ±6° * High machining accuracy and repeatability * Excellent surface finish * Stable machine construction * Low operating costs * CE certified Technical Specifications * Model: EDM32 * Table travel: 440 × 350 mm * Table size: 380 × 650 mm * Maximum cutting height: 400 mm * Wire diameter: 0.12–0.25 mm * Taper cutting: ±6° * Maximum cutting speed: 120–150 mm²/min * Surface roughness: 1.6–2.5 Ra * Machining power: 2 kW * Wire speed: 11 m/s * Maximum table load: 400 kg * Machine dimensions: 1650 × 1150 × 1700 mm * Machine weight: 1150 kg Applications * Mold and die manufacturing Ndjdpfx Aioy A N Ezjyja * Toolmaking * Precision metalworking * Production of complex and high-accuracy components * Prototype and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen Nodpfxezqnxts Aiysda - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Nsdpfjztyxdex Aiyeda Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Nsdpfx Aiey S Ni Ejyjda Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Nodpjp R R Idofx Aiyoda

Condition: used, Year of construction: 2006, Sodick AQ900L Premium Write-Cut EDM Machine, Serial No. 0006 (08.2006) LW33W Control, Travels: X = 900mm, Y = 600mm, Z = 400mm, U & V have the same displacement as X & Y, Max Workpiece Dimensions 1200 x 900 x 400mm Please Note: This Machine is located in Cheshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Please Note: There is a Strict Clearance date for this Auction of 16th September 2026. Nedjzwnmdjpfx Aiyjda

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Ndsdpozpypzjfx Aiyea Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading