Used Eisele Lms 2 for sale (113)

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Dedpsd Rxw Sjfx Aa Nekl cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm Dodpfxefnrw Se Aa Nekl disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm Dkjdpfx Aaexln Uko Nel at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm Dkodpeh I Dvnofx Aa Nol weight: 940 kg

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Dkedpfx Aaoyz T A Uj Nel Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm Dkjdpfx Aajyz Tqre Nol - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device Dksdpfxjyz S Tre Aa Nel - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Dodeyzghdopfx Aa Nokl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Dksdsyub N Uepfx Aa Njl Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Dsdjyrh Rgopfx Aa Njkl Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Djdoyvtyvjpfx Aa Nekl Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm Dodpfx Aasu Niuzj Njkl hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Dkodpfxoyl R T Do Aa Nol Weight: 350 kg Operating principle: hydropneumatic Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Dkodpfsygim Eex Aa Njl MACHINE DETAILS Control: Siemens - PLC control Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Dksdpfxew Inuds Aa Nol Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Dodeygkn Dopfx Aa Nekl coolant lubrication

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Dkjdpfsxpd D Nex Aa Nsl Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: good (used), Year of construction: 1985, Eisele VMS III S.PV cold circular saw Manual saw blade feed Vice Max. saw blade diameter: 350mm Miter cuts of 90-30 degrees Cutting performance (straight cuts):Flat profiles: 200 x 90 mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Cutting performance (miter):◾Flat profiles: 140 x 90mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Dsdpsiyzccjfx Aa Nokl Speeds: 34/68 rpm

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm Dksdpfxeu Nit Ro Aa Nsl cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Djdpjvtarnofx Aa Nokl Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: used, CIRCULAR SAW WITH AUTOFEED Dsdpfxj Dv Ras Aa Nokl Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: Dksdpfjf Dwa Uox Aa Nsl The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW Dkedpfx Aaevu Hlko Njl miter ja weight 700 kg

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N Dkjdpfxequuufj Aa Nol

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: Dksdpfx Aet A Arlsa Njl - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.