Used Electronic Painting for sale (10,197)

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: TR-Electronic, rotary encoder -Type: HE-65-M : 205-00059 -Voltage: 11-27 V Iodpfoh Tadtex Abcstd -Number: 1x encoder available -Price: per piece -Dimensions: 140/100/H165 mm -Weight: 1.3 kg/piece

Condition: good (used), Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, Incremental Encoder -Type: E-58-A Itedpfx Aeqvp Rasbcsd -Shaft: Ø 6 x 12 mm -Quantity: 1x encoder available -Dimension: 85/57/H70 mm -Weight: 0.3 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor -Manufacturer: isert-electronic: two-phase stepper motor 1.8° -Gearbox: 3465 A2411-9212-A2 -Engine: Oriental engine type 2GK9K Isdpsq Adpijfx Abcjtd -Shaft: Ø 8 x 27 mm -Quantity: 6x stepper motor available -Price per piece -Dimension: 135/60/H60 mm -Weight: 0.9 kg/pc.

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) Iedpfxsigyp He Abcstd automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: new, functionality: fully functional, We are selling from stock 2 units of ASI Power Supply AC 1208 at a unit price of €129.00 plus VAT. Input: 230 / 115 V AC; Output: 29.5–31.6 V DC. Itodjyfd R Aepfx Abcod

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. Isdpfxem Tvyxj Abcstd 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itedpfx Asxtwddebcsd

Condition: ready for operation (used), electronic product 8402.087.A connection board for Maho electronic handwheel. 27.68.956, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpfx Abji D Uriecsd

Condition: new, Leuze electronic MA 204i Profibus gateway / modular connection unit, FE: DPS V1.1.1.0 , SN:22335 ,unused, 100% functional, scope of delivery according to photos Itedpfx Aslpkumobcod

Condition: used, functionality: fully functional, IFM Electronic SL20.613 Power Supply. Itodpfewf Sayjx Abcjd Input: 3AC 400-500 Vac / 1,7-1,5A / 50-60 Hz Output: DC 24-28V / 20A Factory set: 24,5V / Cont. Power 490W / Peak Power 600W 2 for sale. 1 piece/80 EUR. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60 Model: OptiCon Type: AdvancedLineX60 Operating hours: 51,326 h (switch-on time from internal PLC) Year of manufacture: 2014 Itsdswlquiopfx Abcjd Technical specifications: Voltage: 230 V AC Frequency: 50/60 Hz Rated power: 800 VA Short-circuit breaking capacity: 15 kA Compressed air: 6 bar Laser class: 2 Protection class: IP20 Features: - 4M camera with T21 resolution and 42 x 42 mm field of view - Angled view - "Chameleon Colour" module - Extended inspection area in the X direction to 670 mm - 2D barcode reader from below - Software version: 5.3

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: Itsdpfsx Eb Hasx Abced - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Technical Data: Control Cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered machine: Used CNC hydraulic press brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z axes currently not operational, see details below) Technical Specifications: - Pressing force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically non-operational – new servo drives required. Manual adjustment possible.) - Stroke: 350 mm - Install height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - Quick-change system tool holders top & bottom - Manual quick-clamping of top tools - Laser optical finger guard (safety light curtain) - PLC-based diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Included accessories: - Fully equipped tool cabinet - Top tool 88°, full bending length - Top tool 35°, full bending length - Top radius bending tool - V8 T-die, full bending length - V12 T-die, full bending length - Flattening die, approx. 2,000 mm length Itedpfx Abjw A Rggjced Condition / Remarks: - The machine is well-maintained, currently connected - Inspection and trial run under power possible onsite - Z1/Z2 currently not functional – new servo controllers required - The machine is being sold due to a planned modernization and replacement by a new press brake.

Condition: ready for operation (used), Festo Electronic E.FEA-88 , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Iodpfsi D U Ngsx Abcetd

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Itedofz U Tijpfx Abced History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V Iedpfxjb Nv S Ss Abcjtd weight: 16,5 kg Space requirement: 720 x 320 x 410 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging Itjdpfsv Stfrox Abcod cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters and diagnostic data to the controller For the connection of up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with the control and the IT world Ijdoh N U Suepfx Abcjtd Technical data: Application area Application I/O modules for use in the control cabinet Electrical data Operating voltage [V] 18...30 DC Nominal voltage DC [V] 24 Max. Power consumption [VA] 2.4 Total current carrying capacity [A] 2 Inputs/outputs Total number of inputs and outputs 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs 18; (8 x 2 + 2 x 1) Input wiring digital inputs PNP Power supply [V] 24 Max. Current carrying capacity inputs total [mA] 1600 Input current limit [mA] 200 Short circuit protection digital inputs yes Short-circuit protection digital inputs yes Overload resistance digital inputs yes Outputs Number of digital outputs 10 Circuit PNP Current carrying capacity per output [mA] 200 Short circuit protection yes Galvanically decoupled no Actuator supply of the outputs 24 V DC Interfaces Communication interface IO-Link Ethernet Transmission rate 10; 100 Protocol EtherNet/IP; Modbus TCP IO-Link master Transmission type COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Number of ports Class A 8 Environmental conditions Ambient temperature [°C] 0...70 Storage temperature [°C] -20...70 Max. permissible relative humidity [%] 95 Protection class IP 20 Approvals / tests Shock/vibration stress EN60068-2-6; EN60068-2-27 Mechanical data Weight [g] 404,5 Dimensions [mm] 105.3 x 45.2 x 113.6 Materials Housing: PA Displays / Controls Display Switching status LED, yellow Operation LED, green Error LED, red Function LED, yellow Remarks Packaging unit 1 piece Electrical connection Screw terminals: ; Grid dimension: 20 mm

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Isdexu H I Uepfx Abcjtd Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: reconditioned (used), We have a large stock of electronic cards for injection molding machines. All our spare parts are tested in our facilities. Ijdpfsfwcu Uex Abcstd

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spindle bore: 90 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 2,000 mm, turning length: 3,500 mm, rotational speed (max.): 250 rpm, TECHNICAL DETAILS Swing diameter: 2,000 mm Turning length: 3,500 mm Swing diameter over cross slide: 1,500 mm Faceplate diameter: 1,500 mm Working area Center height: 1,050 mm Working area Distance between centers: 3,500 mm (4,350 mm with extension) Isdpfx Aoyrdqpjbcjtd Spindle bore: 90 mm Speed range: 0.6 – 250 rpm Bed extension: 700 mm Roller steady rest: 150 – 1,400 mm MACHINE DETAILS Total power requirement: 28 kW Dimensions & Weight Space requirement: approx. 10 x 3 x 3 m Machine weight: approx. 22 t EQUIPMENT Tailstock Steady rest

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Iodpfx Abjyqynuocstd Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7615

Year of construction: 2013, operating hours: 200 h, condition: good (used), functionality: limited functionality, General Characteristics of KALTENBACH Equipment 1. Drilling / Profile & Plate Processing Machines Function: Precise drilling of steel profiles and plates, threading, countersinking, and marking. Suitable for pipes, profiles, and plates with complex hole patterns. Features: - CNC control for high precision. - Automatic tool changer for multiple operations. - Servo motors and ball screws ensure accuracy. - Multi-axis spindle for flexible operation. Purpose: Preparation of holes and welding points in metal structures. 2. Cutting / Band Saws and Saw Lines Function: Straight and mitre (angled) cutting of steel profiles, tubes, and plates. Features: - Band saws or circular saws. - Mitre cutting capability. - Automated conveyor systems for efficient material handling. Purpose: Production of structural elements and construction parts. 3. Shot Blasting Systems Function: Removal of rust, scale, and contaminants from metal surfaces. Iodpfx Abeyrfv Tocetd Features: - High-speed shot blasting turbines. - Configurations for profiles, tubes, and plates. - Robust construction for continuous, high-throughput operation. Purpose: Surface preparation before cutting and painting. 4. Painting and Surface Treatment Systems Function: Application of primer and top coats to protect metal surfaces and enhance appearance. Features: - Painting booths and robotic spray systems. - Integrated drying units. - Conveyor and transfer systems for continuous workflow (blasting → painting → drying). Purpose: Corrosion protection and achieving a professional surface finish. Overall Characteristics - Modular and customizable system configurations. - CNC control and automation enhance productivity and precision. - High throughput and industrial-grade accuracy. - Complete production line integration: cutting → blasting → painting.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Itedpfx Abehby Riecjd Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: used, Bütfering ECO 111 Electronic Wide Belt Calibration and Fine Sanding Machine Contact Roller Unit 85 SH CPS Electronically Controlled Segmented Sanding Pad Working width 1100 mm Terminal for various work programs with selector switch and LED display Motor power approx. 11 kW Brush Cleaning Unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Itodpjyuxkpsfx Abcjd Machine is FACTORY-REFURBISHED and in TOP CONDITION Available from stock in Lieboch