Used Electrostatic Paint for sale (3,483)

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm Gedpfx Aneyhbggsxsit - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Price: 3500.- Location: 1230 VIENNA Gisdpeyvkwfsfx Anxjt

Condition: like new (used), Year of manufacture: 2017 Electrostatic oil mist separator for oil-cooled automatic lathes Quantity: 14 units Gjdpfx Anjxgnwksxoit Brand new, never used

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING Gisdpfjvv Rfksx Anxst As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Gedpfxovv H Hdj Anxeit Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, FILTER WITH A MEMBRANE PUMP !!! A bathtub for removing the varnish coat from rims and other objects covered with various types of paints, solvent varnishes and powder varnishes. Basket working dimensions (mm): 1250 x 800 x 700 mm * The bathtub is made of high-grade 304 acid-resistant steel. * Insulated on all sides with 40 mm insulation material, it allows us to efficiently and quickly heat the liquid to the desired temperature. * The shell of the device is made of stainless steel. Equipment of the device: - Indirect heating (heating mantle), - Automatic temperature control of the heating medium, Godpfx Aogwg Hasnxeit - Baskets made entirely of stainless steel, - LED indicator lights, - Ceramic heaters in the cover of 2 x 4,5 kW acid-resistant pipes, - Aeration system for the entire bottom of the bathtub, - 12-month warranty. Our devices are made with great care and attention to detail. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: used, Trolley 12 levels Gjdpfx Answbtvujxeit - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm Godpfx Aeu Afu Rjnxsit - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Giedpfx Aowqg Iijnxst Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Gsdpfxjwu Aa No Anxeit Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,100 mm, total length: 1,500 mm, total height: 2,400 mm, 🇬🇧 WHEEL PAINT STRIPPING TANK — TOP SALES | ULTRA PREMIUM BUMEX Sp. z o.o. — Industrial Chemical Stripping Technology Professional industrial stripping tank designed for intensive chemical removal of powder coatings, industrial paints and solvent-based coatings from aluminium and steel wheels as well as various metal components. Engineered for maximum process efficiency, operational safety and long-term continuous industrial use. Gsdpfxsfmf Ize Anxeit Technical Data Working basket dimensions: 1200 × 1200 × 700 mm (simultaneous processing of up to 8 wheels). Chemical capacity: approx. 1200 litres. Construction materials: process tank — acid-resistant stainless steel AISI 304, external housing — stainless steel. Thermal insulation: fully insulated tank — 50 mm (high temperature stability and reduced energy loss). Standard Equipment ✅ indirect heating system via oil heating jacket for uniform temperature distribution, ✅ automatic heating medium temperature control, ✅ ceramic heating elements in acid-resistant protection tubes — 4 × 3.5 kW (14 kW), ✅ mixing system supporting uniform chemical circulation throughout the tank, ✅ fully stainless steel process basket, ✅ heavy-duty loading frame for safe lifting and lowering of the load, ✅ industrial control panel with LED status indicators and safety protection systems, ✅ fully enclosed stainless steel construction resistant to aggressive chemical environments. Key Advantages ✔ uniform heating of the entire chemical volume — no local overheating, ✔ high process efficiency with optimised energy consumption, ✔ designed for continuous industrial operation, ✔ excellent chemical and thermal resistance, ✔ ergonomic loading of wheels and large components. BUMEX Quality Standard CE conformity, full technical documentation, manufacturer warranty — 12 months, warranty and after-sales service, professional technical consulting. Commercial Terms ✔ short delivery times, ✔ customised configurations and dimensions available, ✔ own transport — individually priced, ✔ VAT invoice provided. BUMEX Sp. z o.o. — Industrial solutions engineered for reliability, safety and long-term performance.

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. Gsdpfx Aovxfkaonxsit FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system Giodpfx Anjyuf S Hjxst

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Gjdpsw I Uygjfx Anxeit Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Availability: short-term Location: Hochheim

Condition: used, working width: 250 mm, Brushing Machine / Brushing Automat Manufacturer: Ceetec Model: A 250 Automatic brushing machine with brush application system Workpiece dimensions: Max. width: 250 mm Max. height: approx. 100 mm Length: from approx. 800 mm The painting machine is suitable for the application of paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical specifications: - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating distributor brushes on 8 axes (standard nylon bristles) for four-sided application of coating materials Gijdpfxeyuapte Anxjt Feed speed adjustable via feed roller, approx. 16-45 m/min. Capacity: approx. 960 – 2,500 meters/hour Power supply: 3 × 380 V EU Machine weight: approx. 350 kg Machine will be cleaned and technically inspected before delivery. All hose connections, the diaphragm, and the set of brushes will be renewed! Delivery time: approx. 3-4 weeks

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Gsdpfsytgpqjx Anxoit

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Giodjyx Irlopfx Anxst Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Giodpjyf Aypsfx Anxot Drive pinion: 10 teeth Chain sprocket: 10 teeth Carrier width: 30 mm Chain link length: 130 mm MACHINE DETAILS Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Giedeuyh R Aopfx Anxot Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800

Condition: good (used), Year of construction: 2012, I. System Concept of the New Painting Workshop Based on Drawing: 12-137-010a System Description: The system is designed for painting parts of IKEA garden furniture. Dimensions of individual parts: - Length: max. 3,500 mm - Width: max. 100 mm - Height: max. 2,200 mm Part Hanging Arrangement: - 2 chairs/1 table (220 per beam, stacked one above the other); paint application must be adjusted to prevent dripping onto the parts. Traverse (Beam) Length: Gedpfx Aeylhxqjnxjit - 4,000 mm Number of Traverses: - 228 pcs Conveyor Speed: - 5 m/min Capacity: - The system is designed to paint 300,000 pieces of garden chairs per year, calculated as follows: - 7,200 single parts per 2 shifts (one chair consists of 6 single parts) - 1,200 chairs per 2 shifts = 600 beams in 2 shifts - 600 beams x 1.2 min = 720 min = 12 hours effective production > 16 hours (2 shifts) – calculated based on 6 production hours per shift Paint System: - Intended for use with low-solvent (VOC-compliant), water-based paint materials from the respective manufacturer; non-combustible and non-reactive with other paint substances. - Coating process includes one cycle for both flow-coating and top-coating.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: Gisdpswcp I Asfx Anxst - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Gijdpfx Aexz Achenxst Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. Gjdpfx Asx H Rhronxeit - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: good (used), Year of construction: 2015, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Gijdpfjvmtw Rox Anxot Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: used, Used paint mist extractor with 2 side baffles with 2 fans otherwise as shown in pictures Gsdpfxowka Nae Anxsit Availability: Short term Storage location: Röllbach