Used Elektromotor 110 Kw for sale (47,237)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, nominal current: 238 A, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Cedpsvf E Avsfx Abcerh Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2022, operating hours: 2,597 h, JCB 3CX Plus from year of manufacture 2022 with only 2,597 operating hours and 81 KW / 110 HP!! ----* Manufacturer: JCB * Model: 3CX Plus * Year of manufacture: 2022 * Approx. operating hours: 2,597 * Power: 81 KW / 110 HP * Telescopic arm with 1 x digging bucket * Hydraulic quick coupler * Including multi-purpose bucket * Including pallet fork * Piped * CE declaration available * Good condition! * More photos available on request! * Video available on request! * Price: 57,900 Euro, net + 19% VAT. ----For further questions, please call: Credpfx Aoxlmfujbcjh For more questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without guarantee or warranty. Subject to errors and prior sale.

Condition: good (used), Geared motor, electric motor, electric geared motor Cjdpfx Asptf Iajbcorh -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Condition: excellent (used), Year of construction: 2012, operating hours: 1,06,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Year of manufacture 2012. Crodsul U Tyopfx Abcjh New stage at 50,000 hours. With WRG. 8.50 bar with 20.70 m3/min.

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Crodpfx Aowakktebceh Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, type of motor: three-phase motor, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Credpfxorbk Hce Abcsh Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear unit SEW type: R40 -Manufacturer motor SEW type: DF12DT71D-4 -Motor power: 0.37 kW -Speed range: 22-110 rpm -Motor: adjustable -height of the shaft axis: 90 mm -Drive shaft: Ø 25 mm -Construction: B3 -Number: 1 piece of motors available Credpfx Aec I Rk Tsbcsh -Price: per piece -Dimensions: 590/280/H165 mm -Weight: 28 kg

Condition: used, Gear motor, electric motor -Speed: 110 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 54 -Number: 1x gear motor available Csdpfx Absc Uz Hnscerh -Price: per piece -Dimensions: 315/140/H195 mm -Weight: 6.8 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 110 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 x 50 mm Cedpoh Ay Rljfx Abcorh -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 455/190/H155 mm -Weight: 16,6 kg

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 Crjdpfx Abjc Uz Hueceh -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW Crjdpfx Abec U I Edoceh -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg

Year of construction: 2011, condition: used, Temperature control unit, heating, hot water boiler, hydronic system, hydraulic station for high pressure cleaner, high pressure pump -Temperature control units for: water -electric heating for: pressure washer, high pressure pump -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -permissible operating pressure: 6 bar Crjdpfx Abjqw D Dpeceh -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Motor: 22 kW Cjdpfeur N Tbox Abcjrh Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: good (used), electric motor, three-phase motor -Manufacturer: Elektromotorenerk Grünhain, electric motor type DOMA 80K2-BW33 -Power: 1.5 kW -Speed: 2860 rpm -Shaft: Ø 19 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 270/200/H230 mm -Weight: 11.4 kg Cjdpfx Abev Hyd Recjrh

Condition: excellent (used), type of cooling: air, Condenser Guntner -Cooling capacity: approx. 1100 kW -Number of fans: 14 x 910 mm -RPM: 650 Crodpfx Abjwa Rq Tscsh -Adjustable speed -Device dimensions: 9420 x 2400 x 2780 mm -Quantity in stock: 1 -Stock number: SK 146 -Condition: Used, in very good condition, tested, 100% tight

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. Crsdpfjxa Evbox Abcsh - Boiler type: gasification - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 - Fuel feeding: automatic, with screw conveyor

Condition: used, mileage: 3,264 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: other, axle configuration: 1 axle, first registration: 04/2024, next inspection (TÜV): 04/2026, color: white, driver cabin: other, suspension: other, brakes: other, mast type: standard, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, truck registration, ... Subject to alterations, prior sale and errors excepted Crodjq H Rq Ajpfx Abcjh

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: S0065457, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Year 2023 / IMMEDIATELY AVAILABLE! Technical specifications Crodpod Db Ixofx Abcoh Type: BELT XP 11 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 66 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 285 kg Compressed air connection: G 3/4 "

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 24.3-170 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 19 mm -Number: 1 piece of motors available Crsdpfx Abjchg Dhecoh -Price: per piece -Dimensions: 535/240/H230 mm -Weight: 15 kg

Condition: used, mileage: 15,125 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: other, axle configuration: 1 axle, first registration: 12/2022, next inspection (TÜV): 12/2024, color: white, driver cabin: other, suspension: other, brakes: other, mast type: standard, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, ... Subject to alterations, prior sale and errors excepted Csdpfx Asma Tigebcjrh

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 103/420 rpm -Power: 0.36/1.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Brake Crsdecitlpopfx Abceh -Number: 1x motors available -Price: per piece -Dimensions: 580/320/H220 mm -Weight: 42 kg

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: H180 mm Crjdpfx Aov Avu Robceh -Weight: 15.7 kg

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST04-2K VBR 071-12 10B i= 45 Crodettilzjpfx Abcoh -Adjustment gear: KMB-1100366 75 - 14 rpm -Spring-loaded brake: BFK458-08-N 8 Nm -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Dimensions: 410/280/H205mm -Weight: 17.8 kg

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC vector mc frequency converter -Type: SK 1100/3 FCT 27811050/06F300135469 -Power: 2.0 kVA motor 1.10 kW -Input: 3AC 380/460V 47/63Hz Credpsn Tvcaofx Abcjh -Output: 3 AC 0-Input V 0-400 Hz -Control Box: MC 278900000/13F300145636 -Dimension: 200/110/H135 mm -Weight: 1.7 kg

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type Crsdpfx Abeiyqpkjcsh -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg