Used Elumatec Dg 142 for sale (116)

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Product information: Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm The saw heads can be continuously swiveled from 0° to 45° to the left and right, allowing for both external and internal dimension cuts. Indexing points at 15°, 30°, and 45° Hydropneumatic saw feed for precise cutting, infinitely adjustable with rapid traverse Vertical and horizontal pneumatic material clamping devices ensure optimal profile fixation E 111 Electronics: Manual cutting length adjustment with digital display E 111 Switching between absolute measurement and chain measurement Retention of the displayed actual value in the event of power failure Technical Data: Minimum cutting length: 520 mm Electrical connection: 400 V, 3~, 50 Hz Power output per motor: 3 kW Compressed air connection: 7 bar The following accessories are also included: Gujdsyu Hupjpfx Aa Ssa 1x Fixed workpiece support

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 244000015, cutting length (max.): 7,500 mm, saw blade diameter: 550 mm, Saw used only for special builds, has low operating hours, and is fully equipped. IMPORTANT: additionally features an automatically lowerable workpiece support. For further details, see PDF documentation in the attachment. Gujdpjyma Rnofx Aa Sea

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Gujdjuiy Ngspfx Aa Soa Online support connection Delivery and installation on your premises Training of your employees

Condition: excellent (used), functionality: fully functional, Length 3,050 mm Width 900 mm Height 2,600 mm Maximum clamping width 2,800 mm Minimum clamping width 390 mm Height of clamping bars 2,300 mm Width of clamping bars 100 mm Width of lower roller conveyor 120 mm Weight 370 kg Load capacity 200 kg Gjdpfx Aey Aydhja Soua Compressed air connection 7 bar Air consumption 35 l/min

Condition: used, Year of construction: 1998, Hinge drilling machine for processing aluminum profiles with pneumatic material clamps and micro-spray device Processing length: max. 2400 mm Wing profile width max. 108 mm Gjdpsy Anhnsfx Aa Ssua Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm. Weight: about 500 kg

Condition: repair required (used), Year of construction: 2000, For sale: Elumatec cutting and machining centre, model SBZ 610. The machine has been preliminarily commissioned. Requires refurbishment. Guodey Avylspfx Aa Sea

Year of construction: 2018, condition: used, Manual length adjustment via handwheel with digital display For mounting on any Elumatec single- blade saw (left) Max. feed length: 3,000 mm Godpfxjyz U T Is Aa Ssua Pneumatic parking brake

Condition: good (used), Year of construction: 2004, machine/vehicle number: 1400040151, functionality: fully functional, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, CNC machining centre Elumatec SBZ140 Year of manufacture: 2004 Manufacturer: ELUMATEC Gusdpjyr Axxefx Aa Sja The machine is in working condition. For sale due to purchase of a new machine.

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Godpfexqihijx Aa Ssua Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Year of construction: 2002, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1300030418, For sale: CNC machining center for aluminum and steel profiles, Elumatec SBZ 130. The machine is company-owned and located in an indoor production facility, protected from external influences. Specifications and condition: Year of manufacture: 2002. Status: Currently not operational (requires pneumatic system servicing). Gjdpfx Aoyz Dvroa Sjua History: The machine was in active use until 2014, after which it was stored indoors. Electronics: The computer is fully functional, the machine can be started for system testing. Required investment: Replacement of all pneumatic hoses and inspection/servicing of control blocks. Advantages: The machine is mechanically sound and has not been kept outdoors. Ideal opportunity for companies with technical capacity for overhaul or those seeking a reliable base for modernization.

Year of construction: 2009, condition: used, Max. saw blade diameter: 280 mm Pneumatic material clamps Gujdpfx Aaoyzgpbo Sea Rotatable table with locking points Minimum quantity spray device

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Gsdpfx Aoyybr Uea Sjua Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 1997, condition: excellent (used), functionality: fully functional, - Maximum cutter diameter: 280 mm - Cutter bore: 40 mm - Manual feed - Maximum profile height: 200 mm Milling area: - Length: 400 mm - Depth: 110 mm - Height: up to 150 mm - Power: 2.5 kW at 400 V/50 Hz - Milling spindle speed: 2,800 rpm Gedpfxoyyma Ro Aa Ssua - Compressed air connection: 7 bar - Air consumption: 10 l per work cycle, 20 l with minimum quantity lubrication - Dimensions (L x W x H): 1,540 mm x 905 mm x 1,200 mm, weight: 248 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Gedpfx Aajyfhvpj Sjua Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Godpfjy Ah Tkjx Aa Seua Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Gusdjy Aafxepfx Aa Ssa

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Guedpeywxywsfx Aa Sea Weight: about 350 kg

Condition: used, Automatic feed via Elgo control E 255 Gedpfx Aasywxwpe Seua For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: Gujdpfoyxnx Ssx Aa Sea With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 22499, overall weight: 545 kg, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Gedpfxoyyq Dme Aa Soua Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset Support arms and pressing blades included as standard Machine is ready for operation. We can offer shipping.

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Gedpeyvgm Aefx Aa Seua Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Gjdpsx E Rd Defx Aa Ssua Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, functionality: fully functional, Lot of 3 copy routers Elumatec KF78/23. 2 units are fully operational (100%). The third is 50% operational, but can easily be refurbished or used for spare parts. Various spare parts included. Horizontal processing area: With stop: 300 x 100 mm With template: 270 x 70 mm Vertical processing area: With stop: 290 x 100 mm With template: 230 x 70 mm 12,000 rpm Gsdpfoyzfl Iox Aa Soua Clamping range: 150 x 150 mm Supply voltage: 230/400V, 3-phase Price is for the lot of 3 machines, without feed tables.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Guodeyxgzxspfx Aa Ssa Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Gsdoyxgynjpfx Aa Sjua Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation