Used Elumatec Dg 142 for sale (115)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) Kodpfx Aasxlq Rbsnjfa The machine has hardly been used over the past three years as we have two other machining centers. Bar machining center ex works (can be dismantled and collected at any time)

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec Kodpow Syzqjfx Aansfa +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Year of construction: 2006, condition: good (used), functionality: fully functional, Technical Specifications - Elumatec SBZ 122/20 Year 2006 16KW General Data Measurement width: 4622.8 mm Measurement depth: 1828.8 mm Measurement height: 2489.2 mm Kfodpfx Aaow A Ipfsnja Machine weight: 1814.9 kg Main Drive Spindle speed range: 21,000 rpm Spindle motor power: 8.5 HP Axis Travel X-AXIS Travel: 3777 mm Y-AXIS Travel: 350.5 mm Z-AXIS Travel: 279.4 mm Machine can be seen in operation in department 76 Available from week S38/S39 Price includes loading

Condition: used, Elumatec SBZ 130 – 3-Axis Profile Machining Center, 8.5 m For sale is an Elumatec SBZ 130 profile machining center, 8.5 m version, year of manufacture 12/2006. The machine is pre-owned, in perfect technical condition, immediately available, and ready for operation. — Technical Data • Model: SBZ 130 • Year of manufacture: 12/2006 • Axes: 3 Machining capabilities: • Efficient and economical machining of aluminum, steel, and stainless steel profiles • All operations (milling, drilling, tapping) performed on a stationary profile bar, preserving the surface finish • Traveling turret head for short tool change times and optimal machining cycles • Turret head can be equipped with 8 tools or 4 angular milling heads • Automatic clamp repositioning for precise placement of workpiece clamps • 3-axis control, tool spindle serves as an additional axis • Angle heads for lateral and end-face machining Operation & Control: • 18.5” panel PC • USB and network interfaces • Windows operating system • eluCam software Working area: • Machining length: 8.5 m • Max. end-face machining length: 8,380 mm • Max. length without end-face machining: 8,500 mm — Condition & Scope of Delivery The machine has been serviced annually by Elumatec customer service and is in good, well-maintained condition. • Inspection possible at any time • Function video available • Loading and transport possible without any issues — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Kedsxiy U Dspfx Aanjfa

Year of construction: 2003, condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. profile height: 150 mm Kjdpfx Aow Tbqijansfa Pneumatic material clamps Manual feed minimum quantity spraying Weight: approx. 200 kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front Kfjdpow Dzagefx Aanoa 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Kedpoxnz Ivofx Aanefa Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Condition: used, Transport 300 Eur Ksdpfxjwna Rxe Aanjfa

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Elumatec AKS 134 – Technical Data Lower Unit (vertical): Saw blade diameter: 550 mm Swivel range: from +45° (forward) to −60° (backward) Max. cutting height: 210 mm Power supply: 230/400 V, 3~ / 50 Hz Motor power with brake: 3 kW Saw blade speed: 2800 rpm Manual tilt angle adjustment with digital display Kjdpfx Aowvvrzjansfa Upper Unit (horizontal): Saw blade diameter: 500 mm Tilt range: from −55° (downward) to +60° (upward) Max. cutting depth: 190 mm Power supply: 230/400 V, 3~ / 50 Hz Motor power with brake: 3 kW Saw blade speed: 2800 rpm Manual angle adjustment with digital display Max. saw stroke: 830 mm Work Table: Working height: 990 mm Rotary table range: ±30° (center position 0°), manually adjustable with digital display Compressed air supply: 7 bar, Consumption: 35 l/cycle without mist, 45 l with mist Machine dimensions (L × W × H): 3000 × 1420 × 1600 mm Weight: 1250 kg

Year of construction: 1994, condition: used, machine/vehicle number: 20542, Lg.no. 24238 Technical data: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg - with: - Foot pedal - original machine base frame - Pressure gauge + pressure regulator - Round shuttle table for 6 punching tools - Various punching tools Kfedpfsviuk Rsx Aanea

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Kodpfx Asw Rv A Ujansfa Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Condition: excellent (used), Punch St 225 Hydropneumatic, air consumption 9l/per stroke Ram stroke 30 mm Punch pressure 3600 Kp at 6 bar Kjdpst Sigzofx Aanofa 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Weight 60 kg

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-way tool changer for aluminum, PVC or steel profiles Max. processing length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm minimum quantity spraying 2 angle heads High-speed spindle clamp detection and displacement 8 pneumatic material clamps Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg Kedpfx Aou T Nm Nsanefa

Condition: excellent (used), Milling and copying machine Elumatec type KF 78/60 shipping EU - 300 euro Kfjdpfsvi R Avex Aanja

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Cutter diameter max. 280 mm Cutter bore 40 mm Manual feed Profile height max. 200 mm Milling area: Length 400 mm Depth 110 mm Height up to 150 mm Power 2.5 kW at 400 V/50 Hz Spindle speed 2,800 rpm Compressed air connection 7 bar Air consumption 10 l per cycle, with minimal quantity lubrication 20 l Kfodowpchvjpfx Aanja Length 1,540 mm, Depth 905 mm, Height 1,200 mm, Weight 248 kg

Year of construction: 2008, condition: excellent (used), ELUMATEC SLK 118 3-Axis CNC Profile Machining Center.Template-free Profile Copy Router with (3) Controlled axii; designed for machining aluminum and thin-walled steel profiles and extrusions, aluminum, PVC, light alloyed steel.It is particularly suitable for companies who are automating their door production processes; designed for the door and window sector; machining from above, rotate workpiece for machining other side.Specifications:Traverse X-axis 2450 mm/ V max. 36 m/min. (with double linear guides)Traverse Y-axis 350 mm/ V max. 15 m/min.Traverse Z-axis 280 mm/ V max. 15 m/min.Spindle speed 18,000 rpm6.5 HP (4.5 kw) Motor-driven spindle,Routing spindle cooling device(4) Tool holders for tools.Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89")Weight: 1400 Kg (3087 Lbs.)Features: PC Touch Screen Control w/Windows Software3-axis Control Light Barrier for operator protection;(4) Horizontal Material ClampsPulsed Coolant SystemCollet holderQuick-action chuckNOTE: The machine is in excellent condition an Ksdpfx Asxc Udgoanefa

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Kjdevvu S Ijpfx Aansfa Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 26045, saw blade diameter: 420 mm, It performs cuts with double angle. It is supplied complete with input roller conveyor and output roller conveyor equipped with measurement reader. Kfsdpfx Aasv Hfc Eensa

Year of construction: 2007, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Kjdpfxew Axfqe Aansfa Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material clamps Light barrier

Condition: excellent (used), Shipping EU 300euro Kodpfxol Sklgj Aanjfa

Year of construction: 2003, condition: good (used), Roller conveyor Elumatec 3000mm Kfedpetpcrgofx Aanoa

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in the bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Kedpfx Aajuwq S Djnefa

Year of construction: 1993, condition: excellent (used), Maximale Positionierlänge: 2600-3000 mm Anschlag- und Mess-System mit E 255-Steuerung für die Schnittlängenpositionieru Zum Anbau an alle 1-Kopf-Sägen (Recht) Kfedpfxefibfnj Aanja

Year of construction: 1989, condition: excellent (used), Sägeblattdurchmesser: 350 Kfodpfx Aaeff Snbjnoa

Condition: excellent (used), Year of construction: 1999, Table saw Elumatec TS 161 Saw blade diameter 280 mm Saw blade speed 3,200 1/min. Kfsdpfx Aeui Iuwoanja Electrical connection 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg