Used Ema 201 for sale (4,624)

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,850 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 1,295 mm, A40 NG000588, Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. Fpodpfxsyn Uhke Adajd 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 05/2025, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,550 mm, total height: 930 mm, A28 GW26GA00654 Manufacturer: STEMA, Model: MT 750 BS3, 100 km/h... and much more. Loading height: 580 mm Fpodpfoyn Ugysx Adaod Errors and prior sale excepted.

Condition: used, maximum load weight: 334 kg, overall weight: 1,000 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,530 mm, loading space width: 1,280 mm, total width: 1,995 mm, total height: 965 mm, A35 GW26GA00006 Lowerable Trailer Manufacturer: STEMA, Model WOM STS XT .1 Gross weight: 1,000 kg, Low-bed trailer, hydraulically lowerable, with overrun brake * Pivot axle with new kinematics * Support wheel * Hydraulic hand pump * Extremely stable welded frame with integrated railing * Additional central lashing rail * Waterproof phenolic plywood floor * Modern Multipoint III lighting with reversing and fog lamps Fjdpfsyn Ugaex Adaopd * Optimal road holding thanks to stable, hot-dip galvanized chassis with STEMA safety V-drawbar * 2 wheel chocks * 2 mud flaps * Patented foldable license plate holder * Vehicle not refurbished...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 1,792 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 03/2025, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,100 mm, total height: 1,000 mm, A27 GW26NGA00001 Car Transport Trailer STEMA FHAK 25-40-21.2 Vehicle transport trailer, 2-axle trailer, type AT2035, gross vehicle weight: 2.5 t, flatbed, equipped with 10'' tires, loading area: wooden floor, additional ramps for lowered vehicles, overrun braked, 100 km/h approval, with WAP901 cable winch and manual hydraulics. Main frame: Extremely robust and torsion-resistant, with crash-tested safety V-drawbar. Tiltable, sturdy frame construction with safety locks. All frame components are hot-dip galvanized by immersion bath, providing corrosion resistance. Running rails: Extra-wide, perforated, non-slip running rails made of galvanized steel sheet with large elongated holes for securely fastening lashing straps. The extra-wide rail allows for easy transport of vehicles with various wheelbases. Attached loading ramps ensure easy loading and unloading. Side panels: Signal red powder coating (corrosion-free and resistant to scratches) for increased safety. Fpodpfxjyn Ugmj Adaod Vehicle not reconditioned ...and many more features. Subject to errors and prior sale.

Condition: used, maximum load weight: 508 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,530 mm, loading space width: 1,280 mm, total width: 1,980 mm, total height: 700 mm, A34 GW26RGA00109, Lowering trailer, Manufacturer: STEMA, Model: WOM STS XT O1 7.5-25-13.1, Gross weight: 750 kg, low loader, hydraulically lowerable, unbraked, approved for 100 km/h * Swing axle with new kinematics * Support wheel * Hydraulic hand pump Fpodpoyn Ufvofx Adajd * Extremely sturdy welded frame with integrated railing * Additional central lashing rail * Waterproof phenolic plywood floor * Modern Multipoint III lighting system with reversing and fog lights * Optimal road performance thanks to stable, hot-dip galvanized chassis with STEMA safety V-drawbar * 2 wheel chocks * 2 splash guards * Patented foldable number plate holder...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, total width: 2,130 mm, total height: 870 mm, A21. GW26H346846 Internal / loading dimensions: 480 x 206 cm Fedjxw Dy Hepfx Adajpd Payload: approx. 2590 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 910 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made entirely of perforated plate, fully welded and hot-dip galvanized Transport platform: support rails made of LOHR perforated plate + central aluminum tread plate + additional reinforcement from plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Perforated support rails for load securing Side-folding rear lights for easy loading of the trailer Jockey wheel... and much more. Vehicle not refurbished Errors and prior sale excepted

Condition: used, maximum load weight: 2,739 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2022, loading space length: 4,070 mm, loading space width: 2,030 mm, total width: 2,160 mm, total height: 745 mm, A24. GW26G000233, Fpjdpfx Adsyn Ud Eeaod * 100 km/h version with shock absorbers installed * Cleverly stowed, lightweight ALU loading ramps under the loading deck for convenient loading and unloading. * Simply pull them out of the guide shaft and securely hook them in place. * The side perforated railing with multiple additional lashing points ensures your load is held securely. Vehicle transport trailer by STEMA, type Carrier XL - SHA .2, reg. no.: L-AH 138, GVWR: 3,500 kg, with heavy-duty support legs, loading ramps behind the license plate, braked with overrun brake, 100 km/h Vehicle not prepared, errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,297 kg, overall weight: 1,800 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,570 mm, loading space width: 1,530 mm, total width: 1,650 mm, total height: 1,168 mm, Year of construction: 2022, A38 GW26NG000335, rear tipper trailer by STEMA, model ROCKO SHRK 18-25-15.1, GVW 1,800 kg, high loader, mesh extension foldable on all sides, overrun braked, 100 km/h, hydraulic Flexipump – cordless screwdriver pump. Subject to errors and prior sale. Fpodoyn Uczspfx Adaed

Condition: used, maximum load weight: 1,979 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, total width: 1,660 mm, total height: 1,260 mm, A39 GW26GA00010, Rear tipper by STEMA, model ROCKO II SHRK .2, Fpjdoyn Ucuspfx Adaod Gross weight: 2,700 kg, year of manufacture: 2022, overrun braked, high loader, rear tipper with aluminium side panels, hydraulically tiltable, with rear pendulum tailgate. Errors and prior sale excepted.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Fedpfsyn Ucbox Adaspd Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A26 GW26NGA00003 Fsdpsyn Ubqefx Adajpd Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 930 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers Fsdoyn Ub Depfx Adaspd * Integrated ramp rail in every standard version * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Fedpfjtqwrvsx Adaopd Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Condition: new, Year of construction: 2025, The Memak Orion 120 is a high-quality, automatic dough divider designed for bakeries that require speed, precision, and reliability in daily production. This machine enables even and accurate dough portioning in the range of 100 to 1,000 grams, with a capacity of up to 2,700 pieces per hour – ideal for medium and large-scale operations. The Memak Orion 120 ensures safety and consistency in operation, significantly reduces human error, and speeds up the dough preparation process. It is perfect for anyone looking to optimize their bakery production. ✅ Standard features: - Volumetric dividing with vacuum cutting - Weighing accuracy ±5% - Stainless steel exterior and hopper - Lubrication system for the electrical circuit - Adjustable height dough conveyor belt - Flour dusting unit Optional equipment: - Hopper with Teflon coating Technical data: - Dough portion range: 100 g – 1 kg - Works with doughs containing 50 to 85% water - Dividing capacity: 2,700 pcs/h Fedpfxjwycbqe Adaspd - Hopper capacity: 120 kg - Motor power: 1.5 kW - Power supply: 380V / 50–60Hz / 3-phase - Machine weight: 600 kg - Dimensions (W×L×H): 73 × 170 × 170 cm

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm Fsdpfxeymnmqs Adaepd - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7833 TECHNICAL DATA - Max blade diameter: 400mm Fpjdpfjx Arimjx Adajd - Blade bore diameter: 30mm - Max cutting height: 110mm - Main blade adjustable up/down and at an angle - Blade guard included - With side carriage - Angle guide - Cutting length on carriage: 870mm - Cutting width at the fence: 600mm - Main motor approx.: 4kW - Table dimensions: 900x1020mm - Extraction port diameter: 110mm - Overall dimensions (L/W/H): 2500x1400x1000mm - Weight: 530kg ADVANTAGES – Polish manufacture – Includes side carriage – DTR technical documentation – Used saw, very good condition Net price: 7500 PLN Net price: 1790 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, CATALOG NUMBER RE036 2 axes – electric control for main saw blade lift and tilt with electronic display for height and angle, control panel integrated into the machine body – Brand new, ex-demo machine – DTR + CE documentation included – Cutting width at fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilting: 0-46° - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300-400 mm - Max scoring saw diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring saw speed: 8500 rpm Fedpjx S I Srefx Adaspd - Scoring spindle diameter: 20 mm - Cutting width at fence (standard 1050 mm): 1300 mm - Sawing width using end stops on auxiliary table: 215-3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 5-115/3.5-80 mm - Cutting height for 400 mm blade 90°/45°: 25-140/15.5-95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle fence – with aluminum bar Net price: 47,000 PLN Net price: 11,300 EUR (based on exchange rate of 4.15 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: new, CATALOG NUMBER RE022 – New, ex-demo machine – Complete DTR documentation + CE certificate – Cutting width at the fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilt: 0-46˚ - Main motor power: 6 kW - Sliding table cutting length: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max. scoring blade diameter: 125 mm - Scoring saw motor power: 0.75 kW - Scoring saw speed: 8500 rpm - Scoring saw spindle diameter: 20 mm - Cutting width at the fence (standard 1050 mm, option 1300 mm): 1300 mm - Cutting width using stops on the auxiliary table: 215–3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 115/80 mm - Cutting height for 400 mm blade 90°/45°: 140/95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Mitre fence with aluminium rail Net price: 39,000 PLN Fodex Rqrxopfx Adaspd Net price: 9,390 EUR Price calculated at an exchange rate of 4.15 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) All prices are net prices. Net price applies for international transactions and EU customers with a valid EU VAT number.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment Fpodpox D Hnyefx Adasd • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 375 mm, spindle motor power: 18,100 W, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. • Run time: 10,437 hours • Max. workpiece diameter: 100 mm (4") • Chuck diameter: 160 mm (6.5") • Swing diameter: 210 mm (8") • Max. workpiece length: 150 mm (6") • Main spindle: • Power rating (40% / 100%): 18.1 / 13.9 kW (24 / 19 hp) • Torque (40% / 100%): 77 / 59 Nm (57 / 44 ft-lb) • Turret: • Tool positions: 12 Fodex S Skrspfx Adajpd • Driven tools speed: 6,000 rpm • Driven tools torque (30% / 100%): 27 / 15 Nm (20 / 11 ft-lb) • Rapid traverse rate: • X axis: 60 m/min • Y axis: 30 m/min • Z axis: 30 m/min

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment Fpsdpfoyg Nfuox Adaod • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. Fedpfx Ajx D Nlujdaspd • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Fjdpfex D Rqrsx Adaepd • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, overall weight: 5,500 kg, controller manufacturer: SIEMENS, number of axes: 3, It's System of 2 EMAG VL03 horizontal turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this horizontal turning machine system with robot included. Contact us for more information about this system. Additional equipment • Tool Storage: Conveyor belt for max. 27 workpieces • Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed Fpsdpjx Nr Sksfx Adajd • Handling Robot: 8-axis • Protective Enclosure: Robot cell • Scraper Belt Conveyor • Oil Mist Extraction • Cooling System: Cooling capacity 3 kW • Chip Container: 700x700x600 mm Machine Benefits Technical Machine Benefits • Diameter: 30-130 mm • Max height: 145 mm • Tool drive: 6000 rpm Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm Fpsdpfx Asyfq Alsdaod • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)