Used Emco Mill 155 for sale (131)

Condition: excellent (used), EMCO Easy Cycle control Working travels 450 x 350 x 400 mm Table size 800 x 400 mm Boring and milling head turnable + / - 90° Spindle taper SK40 Hnodpfxey H Di Aj Ah Sjt Spindle speeds 10-5'000 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm Hnjdpfxju Ixw Ae Ah Sot max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: good (used), Year of construction: 2007, The Emco Maxxturn 45 SM is in good condition and is still used daily for production on the Emco Maxxturn 45. Primarily, parts made of plastic were manufactured on this machine. The spindle has only 23,848 operating hours. Approximately 6 months ago, the machine control panel with display and the air conditioning unit were replaced. The last maintenance was performed in April 2026, and the geometry was checked. The machine can still be inspected in production until week 39/2026. Technical data: Control: Siemens 840 D Main spindle: Speed: 6,300 rpm Counter spindle: 6,300 rpm Spindle bore max. 45 mm 2 x C-axis, 0.001° High-pressure coolant system at the tool turret Chip flushing system for the counter spindle Sauter tool turret with 12 stations, VDI25 All stations for driven tools Hnsdpfxozyyp Aj Ah Sjt Speed range: 6,000 rpm Travel in X/Z axis: 160/510 Accessories: Chip conveyor Knoll High-pressure coolant pump Finished parts collector Interface for bar loader New control cabinet air conditioning unit LED signal lamp, 4 wedge shoes, machine documentation Machine keyboard with cover 8 rigid tool holders VDI 25 New three-jaw chuck for main spindle and counter spindle with draw tube adapter Optional: Short bar loader magazine Emco LM800 The tools and clamping devices shown in the picture are not included in the sale.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. Hnjdpfx Ahoyzn U Es Sst 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors!

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Hjdpfjxp Iyhox Ah Sont Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A Hnjdpfxoy A Hw Uo Ah Sot • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Turning diameter *over bed 600 mm *over cross slide 500 mm Distance between main spindle and counter spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with counter spindle max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5000 rpm Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% ED) 17/22 kW Speed range 0 – 5000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis*Resolution 0.001° Upper tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Full enclosure with electrical interlock and sliding doors and machine light  Bar loader magazine IEMCA TAL/Auto 65/32 for bar length 3000 mm including: -Guide channel -Centering device -Axial displacement  Thermal compensation systems for the integrated spindle motors (liquid-cooled)  Hydraulic cylinder with draw tube for main spindle  Hydraulic cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in the upper turret (cutting force distribution on 2 axes, resulting in extremely high rigidity)  Drive unit in the upper and lower turret  Part ejector and flushing through the counter spindle  Part removal device for the finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for removing the finished parts from the machine  Turret steady rest including VDI 30 base mounted above the coolant supply (14 bar) centrally in the tool turret Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps at 14 bar each and 2 flushing pumps at 3.7 bar each  Cleaning gun for cleaning the clamping devices, covers and the entire working area with coolant  Chip conveyor (hinge belt) in extended form for portal design, suitable for: -long steel chips -chip clusters -fibrous chips -dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  HAINBUCH collet chuck size 65 for main spindle, without stop Hnjdpfjyx U Hijx Ah Set (without collets)  Serial interface  Mounting elements  Documentation

Condition: used, Year of construction: 2001, x-travel 300 mm Hnedpfozczdhex Ah Sjt y-travel 200 mm z-travel 350 mm table surface area 600 x 200 mm spindle taper SK 30 spindle turning speed range 80 - 2200 U/min feeds X-axis 50 - 550 mm/min feeds Y-axis 50 - 550 mm/min rapid traverse 1500 mm/min quill stroke 45 mm vertical head swivelling +/- 90 ° total power requirement 1,4 kW weight of the machine ca. 500 kg dimensions of machine L x W x H 1,50 x 1,20 x 1,60 m Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Hnsdpfx Ahjy Svz Io Sjt Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Condition: ready for operation (used), Year of construction: 2001, Table size: 400 x 800 mm Table travel distances x/y/z: 600/400/400 mm Swiveling vertical milling head, spindle mounting: SK 50 Quill stroke: 100 mm Speed range: 63 - 3150 rpm Feed rate x and y/z: 16 - 800 mm/min / 8 - 400 mm/min Rapid traverse rate x and y/z: 2000/1000 mm/min Electrical connection: 380 V, 5.3 kW Space requirement: 2200 x 2150 x 1910 mm Weight: 2200 kg Hnedpfx Aezvm D Eoh Sst

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. Hnodpfjzcplyjx Ah Set - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles Hsdpfx Ajya Hg Njh Ssnt • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 Hodpfeyucbfjx Ah Sont • incl. handwheel + 3 vices with clamping devices

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Hnedpfx Ahsw Dfhue Set

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping Hnedpfx Aexvraxoh Set -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 35 kg, total height: 803 mm, total width: 205 mm, total length: 470 mm, EMCO TEST Hardness Tester Spring chuck + dial gauge Maximum testing height with spring chuck: 285mm Maximum workpiece weight: 20kg Mounting according to DIN 51 225, diameter 25mm Hjdszzlcqepfx Ah Sont

Condition: good (used), functionality: fully functional, total height: 2,400 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,600 kg, Equipment: documentation/manual, An Emco PCT 345/2 machine is for sale. The machine is in good condition and is being sold due to the purchase of a new machine. A tailstock is included. No quick-change tool holder or hollow-bore chuck is included. Location: 45209 The machine has always been well-maintained and is fully functional. Hedozzkgbepfx Ah Sent The main drive belt and sensor were recently replaced. The machine is available immediately.

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Hnsdpozxhxvefx Ah Sot Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Hnedpfxezczgvj Ah Sjt Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Operating hours: 4,700 h (increasing) Turning diameter: 65 mm CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense. Hodpfx Ahoxwp I Ao Ssnt

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A Hnodpfx Aezl D Aweh Sjt - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle Hjdpfx Aoyzn H Uoh Sent - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm Hnsdpfx Ahsy Hty Ds Sjt • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Hnodpfjwyit Hjx Ah Set Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, Hjdpfszkk Hyox Ah Ssnt 12-station turret (VDI16), collet chuck, jaw chuck, steady rest, driven tools, accessories