Used Everun Er 12 for sale (1,44,912)

Condition: used, mileage: 23,089 km, power: 177 kW (240.65 HP), first registration: 12/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Extremely clean vehicle with only 23,089 original km +++ without rear-built-in pump (was defective) Ideal base for an expedition vehicle. 1,200 l water tank is leak-free, baffle plates are defective, mechanical light mast Pneumatically extendable side steps left + right All-wheel drive 4x4 with 2x differential locks – center and rear, ABS Wheelbase 3,640 mm Maximum speed according to documents 95 km/h, GPS = 97 km/h Freshly serviced including greasing, new fuel filter, and new air dryer cartridge +++ Subject to errors, changes, and prior sale Cedpfxsxnukwe Addehf

Condition: used, axle configuration: 3 axles, first registration: 02/2000, color: other, Year of construction: 2000, Empty weight: 4.680 kg Axle 1: left 6 mm right 6 mm Axle 2: left 12 mm right 12 mm Chjdpsxywpaofx Addjf Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Chjdpfx Adjxxl Izjdsf

Condition: new, Year of construction: 2025, Powered Load Moving Skates, compact built with low heights and capacities of 10, 24 and 40 tonnes. Intelligent Single-Joystick Control for all movements. Version with integrated lifting cylinder available as well as DUO controll for two powered skates. Please send us your request for a detailed offer. Cedpfx Adsgi Dm Hsdohf

Condition: used, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 5,600 mm, total length: 8,000 mm, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 Chodpjxpx R Defx Addof - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: used, mileage: 2,83,400 km, power: 300 kW (407.89 HP), first registration: 09/2010, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, * Our internal reference number: 1081 * Vehicle currently registered and in operation – mileage and condition subject to change * Tourismo O 350 - 15 RHD (12 m version) * First registration: 09/2010 * 300 kW / 408 hp – EURO 5 (high-performance engine) * The following work was carried out at EVOBUS at the end of August 2025: * NEW CLUTCH * NEW DUAL MASS FLYWHEEL * NEW TRANSMISSION WIRING HARNESS * Cruise control * Retarder * 51+1+1 – total 53 seats * Armrests between double seats * WHEELCHAIR LIFT * Wheelchair space * Toilet * French inspection book available * Maintenance book also available * Alloy rims * New air conditioning service in 06/2025 * New customer service in 06/2025, including e.g.: oil change, diesel filter, air dryer cartridge, oil filter, ... * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. Chodewap I Djpfx Addsf * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: used, mileage: 2,35,570 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,500 kg, first registration: 04/2021, next inspection (TÜV): 05/2026, loading space length: 3,380 mm, loading space width: 2,210 mm, loading space height: 1,900 mm, emission class: euro6, color: white, number of seats: 2, total length: 6,320 mm, total width: 2,310 mm, total height: 2,965 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz Sprinter 514 CDI Refrigerated Box Truck ---- * Refrigeration unit: Carrier Xarios 350 * In-transit cooling * Standby cooling – power connection (electric operation – electric connection) * Rear double-wing doors * Tail lift with 1,000 kg lifting capacity Csdpsw Egw Tjfx Addehf * Right-side doors ---- * 1st hand (one previous owner) * NEW: TÜV inspection (valid until 05/2026) * NEW: Oil change service ---- * Air conditioning * Cruise control * Lane keeping assist * Active brake assist * Rear view camera * Driver’s seat heating * Keyless Go * Automatic headlights * Engine start/stop function * Electric windows * Electrically adjustable exterior mirrors * Central locking with remote control * ABS * ESP * Driver airbag * Armrest on driver's seat * Driver comfort suspension seat * Euro 6 D engine * Automatic transmission with shift paddles * Radio: tuner, USB-C, media/music playback via Bluetooth audio * Bluetooth hands-free system * Roof spoiler ---- * Truck registration (N2) * Wheelbase: 3,665 mm (medium wheelbase) * Dimensions (cargo area) LxWxH: 3.38 x 2.21 x 1.90 m * Dimensions (vehicle) LxWxH (in mm): 6,320 x 2,310 x 2,965 mm * Permissible total weight: 5,500 kg * Payload: 2,286 kg * 2 vehicle keys available * VAT deductible ---- * We speak German / English / Greek ????? ???? * Financing available upon request * We will assist you with all registration (customs license plate/temporary plate) and customs formalities * We will be happy to make you a purchase offer for your vehicle * Web: * E-mail: ---- Price changes, prior sale, typographical errors and mistakes excepted

Condition: used, maximum load weight: 28,440 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 09/2026, loading space length: 7,610 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,030 mm, Equipment: ABS, Steel rear tipping body approx. 26 cbm, roll tarp, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension, on/off switch for tipper lowering, lift axle, support winch(es). Vehicle may feature advertising stickers and/or lettering. Cjdpfxoxpcdne Addjhf Our offer generally excludes a new roadworthiness inspection (TÜV). If a new TÜV is required, we will gladly provide you with a quote from our partner workshops! Vehicle may feature advertising stickers and/or lettering. Our general delivery and payment terms apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: good (used), machine/vehicle number: 3315, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,400 mm, total width: 2,550 mm, operation weight: 23,610 kg, additional equipment features: Rear mud guards, Weight system, Warning triangle, Dual tread, Engine heater, Front mud guards, Hydraulic sliding cabin, Equipment: lighting, Hyster H16.00XM-12 from Uniktruck Chsdpfx Asv Hhagoddjf

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Codpeuc Sifofx Addshf Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: used, Year of construction: 2019, load capacity: 15,360 kg, lifting height: 5,620 mm, total length: 8,000 mm, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 Chsdpfsxpx Ngjx Addjf - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: used, axle configuration: 3 axles, first registration: 04/2019, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2019, Tyre size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Chodjxl Sqvopfx Addjf Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Unladen weight: 8,000 kg For more information, please contact Bob Beukers.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Csdpfjvca Izox Addshf Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm Chedpoir E Snefx Addsf -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: excellent (used), mileage: 2,36,455 km, power: 353 kW (479.95 HP), first registration: 10/2011, fuel type: diesel, color: yellow, axle configuration: 8x4, fuel: diesel, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, low noise, soot filter, spoiler, = Additional Options and Equipment = - Aluminium fuel tank - Power brake booster - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - Air horn - Fog lights - Particulate filter - Radio/cassette player - Reversing camera - Sun visor - Stability control - Toolbox - PTO (power take-off) - Central locking system = Further Information = Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Fuel tank capacity: 500 liters Body manufacturer: MTS DINO 12 Technical condition: very good Optical condition: very good MERCEDES-BENZ ACTROS 3248 8X4 TRIDEM MTS DINO 12 SUCTION EXCAVATOR EURO 5 L PACKAGE 480 HP 8X4 TRIDEM DRIVE – LAST AXLE LIFTABLE AND STEERABLE Wheelbase: 420 cm Air suspension Actros cab with air conditioning, camera Differential lock Chodpfx Aeuxqgqoddef Manual transmission MTS DINO 12 SUCTION EXCAVATOR (TYPE 4A14 T 36.000 V) DOUBLE TURBINES!!! Hydrostatic drive with remote control Power boom with rotary head Central lubrication system 2x radio remote controls Extra high-pressure pump unit (200 bar) with hoses and gun Extra air valves at the rear of the truck for using pneumatic tools such as a hammer Compressor: 6,112 hours Fan: 6,140 hours All available manuals and service books Follow us on Instagram: geurtstrucks We speak German Hablamos Español We speak English

Condition: used, Trolley 12 levels - year of construction unknown Chodewbtvujpfx Addjf - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Roller conveyor + cross conveyor + roller conveyor Csdok Ritpopfx Addjhf good technical condition

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Chjdpfoxu Ibpjx Addof Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2105261-01, Offer 25388 Technical Data: - Load capacity 1000 kg - Electric chain hoist VETTER - 2 lifting speeds 4 + 1 m/min - Jib outreach approx. 2000 mm - Jib arm IPE 220 - Hook height approx. 2700 mm - Slewing radius 360° - Total height approx. 3300 mm - Baseplate of column / pedestal approx. 1400 x 1400 mm - Total length approx. 2900 mm Chjdsxt Iq Ijpfx Addjf - Total weight approx. 4400 kg - Connection 400 V / 32 A

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery Chodexv Di Eepfx Addof High-throughput screening

Condition: excellent (used), axle configuration: > 3 axles, first registration: 10/2016, loading space length: 90,000 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 12,400 mm, total width: 2,550 mm, total height: 850 mm, suspension: hydraulics, tire size: 245/70/17.5, color: red, Year of construction: 2016, Equipment: ABS, Axle configuration Tire size: 245/70/17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 12,000 kg; Steered Weights Unladen weight: 14,200 kg Payload: 39,800 kg Gross vehicle weight (GVW): 54,000 kg Functional Loading platform height: 85 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good SCHEUERLE EUROAXLE 1T4 4-AXLE SINGLE-TELESCOPIC SEMI LOW LOADER 4 x hydraulically suspended axles 4 x hydraulically steered axles 12,000 kg per axle Technically permissible gross weight: 66,000 kg Electrohydraulic steering assistance system Cedpev S U R Njfx Addshf Remote control Tire size: 245/70 R17.5 Extendable up to 620 cm Loading area length: 900 cm + 620 cm, extendable up to 1,520 cm Loading area width: 255 cm + 2 x 22.5 cm extensions, total width 300 cm Platform height: 85 cm Lashing rings and round recessed pots

Year of construction: 2020, condition: used, Year of manufacture: Nov 2020 New: No Chodpfxjxvbh Ee Addof 6 TRAILERBANDEN 385/65 R 22.5 / ZO VAN SCHADE TRAILER / GOEDE 385/65 R 22.5 OP VELG PRIJZEN VAN 150 TOT 250 EURO P STUK

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Chsdpow Si T Aefx Addjf Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Year of construction: 2025, condition: new, functionality: fully functional, Bucket Screen buckets for screening all loose materials. Cedpfx Aev D Hb Djddjhf 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Various sizes, 2,3,4,5 or 6 shaft buckets

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Chedpoxf Ak Tsfx Addsf Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA