Used Ex Fan for sale (57,891)

Year of construction: 1993, condition: good (used), Radial fan, high-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: Höcker, radial fan extractor fan -Type: TRE 05-315 -Engine power: 1.1 kW / 2800 rpm -Volume flow: 2500 m³/h -Connection input: Ø 300 mm -Connection output: Ø 300 mm -Fan wheel: Ø 350 x 140 mm Ijdpfsv E D Rxsx Aabjtn -Protection class: IP 54 -Dimensions: 750/440/H950 mm -Weight: 53 kg

Condition: good (used), Extraction fan Motor: 11kW Itedpfx Aaegmnw Esben

Condition: used, Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg Itjdpspz Sfhofx Aabjn

Condition: good (used), Extraction fan Motor: 4kW Itedpfxsgmnv Io Aabsn Available extraction capacity: 80m³ / min; 100m³ / min Pipe dimensions: see photos Used, immediately ready for use

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow: m³/h -Connection input: Ø 450 mm -Connection output: Ø 450 mm -Impeller: Ø 670 mm Isdpfx Aaob Ilxdsbjtn -Number: 1x available -Price: per piece -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: used, Extraction fan 2 pieces in stock, Itedpfx Ajgm E E Isabjn Dimensions see photos

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 Iedpfjuncwxsx Aabetn -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295mm -Weight: 15.4 kg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 8584 m³/h -Total pressure: 4035 Pa -Engine: 15 kW 1460 rpm -Connection input: Ø 300 mm -Connection output: 250 x 400 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø760 x 200 mm -Dimensions: 570/1000/H1470 mm -Weight: 381 kg Itedpfx Aaev Rf Hljbsn

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg Iedjlzmylspfx Aabetn

Condition: used, Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: ebm, radial fan extraction fan -Type: 2CF2062-OEA Itodpfx Ast E D Hisabsn -Engine power: 0.18 kW / 2740 rpm -Connection input: Ø 62 mm -Connection output: Ø 63 mm -Fan wheel: Ø 240 x 30 mm -Protection class: IP 54 -Dimensions: 340/300/H355mm -Weight: 8.8 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Itodpfot Hy Ufox Aabjn -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg. Isdpfxevt R Ako Aabjtn

Condition: good (used), Year of construction: 2000, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, radial fan chip extraction fan type VFM-S -Volume flow: 2400 m³/h -Pressure: 4000 pa -Motor: VEM 5.5 kW 2800 rpm -Connection input: Ø 180 mm -Connection output: Ø 180 mm Isdpownby Ijfx Aabjtn -Fan wheel: Ø 500 x 160 mm -Number: 2x fans available, (1x right / 1x left) -Price: per piece -Dimensions total: 830/700/H1110 mm -Weight: 143 kg/piece

Condition: like new (used), Year of construction: 2025, spindle speed (min.): 24,000 rpm, Machine type: CNC Vertical Machining Center Model: Robodrill L with Automation Manufacturer: Fanuc / TS Control: Fanuc Year of manufacture: 2025 Location: Germany for our customers in Baden-Württemberg (BW) TECHNICAL DATA FANUC ROBODRILL Travel X-Y-Z: 700 x 400 x 330 mm Main spindle speed: max. 24,000 rpm Tool holder: BT30 with Big Plus Drive power: 26 kW (1 minute) Tool change time: 1.6 sec. (chip to chip) Connected load: 20 kVA Weight: approx. 2,500 kg Itedpfxsxdvkws Aabjn TECHNICAL DATA FLEX-ROC CELL Robot: Fanuc M10 ID/L 2 gripper change positions Max. part weight: 8 kg Max. workpiece size: 230 x 150 x 150 mm (adjustments for other sizes possible) Parts conveyor: 1700 x 580 mm Max. number of tools: 64 Connected load: 4.5 kVA Weight: 1,700 kg (Subject to errors in technical data and specifications)

Condition: used, Used machine Technical data: Airflow: 6,400 m³/h Total/static pressure: 2,300 Pa Speed: 2,890 rpm Motor power: 7.5 kW Medium density: 1.2 kg/m³ Availability: short-term Location: Röllbach Itedexmlw Sjpfx Aabjn

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Iodpfoxdfabex Aabetn Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Itodpfjxbd U Ejx Aabon

Condition: used, functionality: fully functional, type of cooling: air, Original used fans in stock for Carrier 30RB and 30XA. Good condition. Suitable for chiller replacement or upgrade. 📦 Shipping across Europe available. 💨 Original Carrier 30RB / 30XA fans. Iedpfx Aaexazr Eebjtn Used fans from Carrier 30RB / 30XA chillers—tested and working, removed after diagnostics. Great for replacing failed components.

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Iedpfsurt Tlex Aabstn This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Itjdsgtyhropfx Aabon Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Itodpfxjt Hw D Dj Aabon * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Itedpfx Aaoua Eu Nebsn Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 95670040, The BM EXTRA machining center is a 5-axis machine, designed and built for processing large-size panels in the construction industry. The machine is fully protected by fixed and movable guards, as well as pressure-sensitive bumpers, ensuring an adequate level of safety. Gantry machining center with 5 dedicated axes and milling motor. Isdpjw Hxaiefx Aabetn

Condition: used, Year of construction: 2007, functionality: fully functional, type of cooling: air, Original Fan for YORK Chillers P-32-25 (026-45045-000) | Ø900 mm | 5 Blades | 3~400V We offer the original branded YORK P-32-25 fan (part number 026-45045-000) — removed from premium segment equipment. This is not a Chinese replica, but an authentic fan designed for intensive use in cooling and air conditioning systems. Key Features: • Manufacturer: YORK (Johnson Controls) • Model: P-32-25 • Part number: 026-45045-000 • Diameter: 900 mm • Number of blades: 5 • Voltage: 3~400V AC • Year: 2007 Itedpfx Asw E Dy Soabon • Condition: Used, in working order • Removed from 3 YORK chillers (14 fans per chiller) 📦 Available for individual or set sales. 📍 Located in Poland. Fast shipping within the EU.

Year of construction: 1960, condition: used, centre distance 1200 mm 550 weight of the machine ca. 2,5 t multifix Ijdpsqwpwhofx Aabstn