Used Extractor for sale (799)

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Njdpfx Aedqzcvsa Iodc Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: good (used), Year of construction: 2011, functionality: unexamined, Technical details gangway length 14000 mm working width 3700 mm burner heads 6 Control CNC 802 Note: A burner table and an extractor are not included in the scope of delivery. Nodpfx Aajxnpmas Isdc

Condition: excellent (used), Year of construction: 2018, operating hours: 2,651 h, functionality: fully functional, Rotatable diameter as Swiss-type lathe: 38 mm Njdpfoxnbc Hjx Aa Iedc Rotatable diameter as conventional lathe: 42 mm Guide system: JBS double cone Parts catcher included: for both short and long parts Turning length in a single pass: approx. 320 mm (simultaneous finish and roughing) Simultaneous machining: front and rear sides Control: Fanuc Series 31i-Model B In-process measurement: Blum probe Bar feeder: FMB LSK38, max. bar length extended to 3300 mm Oil mist extractor: UC1SD High-pressure system: available, 100 bar Lubricant: coolant Various accessories: guide channels, guide tubes, various tools, various double cone bushings

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobile EA160A Ø suction 160 mm Year of construction 2006 Weight 310 kg Ndsdperbiiwofx Aa Ijc Nominal volume flow 2050 m³/h Minimum volume flow 1447 m³/ 3 kw Automatic cleaning

Year of construction: 2025, condition: new, functionality: fully functional, Unox Bakertop 6 Countertop Plus Convection Oven NEW NEW NEW NEW NEW NEW NEW NEW NEW Technologically advanced combi oven for fresh or frozen baking processes, as well as for a variety of foodservice cooking applications (dehydrating, steaming, low-temperature baking, sous-vide cooking, roasting, grilling, pan frying, regeneration, and plate regeneration). Thanks to Unox Intensive Cooking touch controls and Intelligent Performance, perfect and repeatable results for any batch size are guaranteed. Automatic cooking process management (CHEFUNOX) ensures optimal results, even for untrained staff. Unox Model: XEBC-06EU-EPRM Convection oven for 6 trays 60x40 cm Unox Oven Intelligent Performance Touch panel with 1000+ programs Core temperature probe USB port Rotor.Klean self-cleaning system High-performance convection oven Connection: 400V, 32A CEE plug Water connection: 3/4 inch, water drain DN 40 Dimensions: 860 x 967 x 842 mm (W x D x H) Oven is NEW With warranty and spare parts service Quality from your official Unox specialist and service partner! Benefit from over 35 years of experience! Options: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection DDC.App Extractor hood with steam condenser Spray & Rinse cleaner Service package Undercarriage Maintenance contract Delivery service to production site On-site training & commissioning Visit our Unox Baking Center! Njdpfx Asxmrlpea Iedc

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Njdod Ab Rhepfx Aa Iodc Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Nsdpfx Aashk S Sto Ijdc Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 2020, System of 3 independent stations for soldering electrical components Njdpsxny Alsfx Aa Iodc Designed for high quality soldering System working automated with 3 robots MITSUBISHI ELECTRIC Horizontal multi-joint SCARA industrial robotic arm with built-in stand-alone controller type CR800 The System is composed by high quality 3D camera control This set can be adjusted for soldering of different products Fume extractor system Comprising: 3x ROBOTS -MITSUBISHI ELECTRIC-RH-6FQRH5520N-D 1x KEYENCE-XR-HT40M 1x SCHNEIDER ELECTRIC HMI PROFACE-PFXSP5700WCD 2x TAICENN HMI TM-PC215W 1x KEYENCE SR-1000 1x PUREX Fume extractor

Condition: used, total height: 3,300 mm, total width: 1,850 mm, total length: 3,450 mm, Empty weight: 2.000 kg Extraction installation ModestaCapacity +/- 15,000m³/h Extractor fan 18.5 kW Connection diameter 500mm Transport fan 7.5kW Electric knocking system (vibrator) Filter bags Filter bags 72 pieces Filter length 1950mm Filter diameter 200mm There is no door for filter items. Transport dimensions: 3450x1850x3300mm (LxWxH), + 2x pallet Weight +/- 2000kg - Number of filter bags [pcs]: 72 - Filter length [mm]: 1950 - Filter diameter [mm]: 200 - Connection diameter [mm]: 500 - Main fan power [kW]: 18.5 Nsdpfx Aaownh Apo Iodc - Control cabinet present: No - Shaking system: Yes - Collection bins: No - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 7.5 - Documentation available: No - Transport dimensions: 3450mm x 1850mm x 3300mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Ndsdergaw Hepfx Aa Iec Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: used, Year of construction: 2000, functionality: limited functionality, Manufacturer: STAR Type: SR-20 Year of manufacture: 2000 with: FANUC 18i-TB control, powered tools (main side), synchron spindle, back side machining (motor defective), C-axis, chip conveyor, oil mist extractor, fire extinguishing system, Ndjdpexl Ridsfx Aa Isc bar loader magazine FMB

Condition: like new (used), functionality: fully functional, type of input current: three-phase, Dust Extractor RL 350 Njdpfx Aasxm Swfo Ijdc 3 x 400V 50Hz 15HP 11kW | Power and speed adjustment through pressure measurement | Powder extinguisher instead of water extinguisher • Max. air flow rate: 8000 m³/h • Nominal air flow rate: 20 m/sec, 6920 m³/h • Vacuum: 2630 Pa • Filter (surface) area: 71 m² • Extraction port diameter: 350 mm • Remaining dust concentration, returned airflow quality:

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Ndodpfxohk S Swj Aa Ijc Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: good (used), Code: 0215 Brand: STROMAB Model: PS 45/F - CE Standard Manual pendulum saw for cutting wooden boards, packaging, wooden fixtures, carpentry, sawmills, and various - CE Standard Technical data: Blade diameter mm 450 F30 Motor Hp 5,5 Motor speed rpm 2800 Ndjdpfjxivzajx Aa Ioc Cross-cut capacity mm 510 Depth of cut mm 130 Manual feed Inlet roller table Outlet roller table Extractor hood diameter mm 150 Overall dimensions mm 3800 x 1500 x 1850 h Weight kg 290

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 Ndedpfx Aajxmag Ij Ioc - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ Ndodpfxeiu Smbs Aa Ijc volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system Nsdpfx Aouviyqsa Ijdc - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: used, functionality: fully functional, volume flow: 4,500 m³/h, filter area: 1.23 m², type of input current: three-phase, total length: 1,180 mm, total height: 1,350 mm, overall weight: 125 kg, total width: 830 mm, nominal power: 2.5 kW (3.40 HP), rotational speed (max.): 1,400 rpm, intake manifold diameter: 300 mm, Schuko Paint Mist Extraction Unit Type 300 D Description: Mobile paint mist extraction unit from Schuko, model 300 D – ideal for painting, staining, and coating operations in workshops and small businesses. This unit is mobile, ready for immediate use, and comes with a new filter mat. Thanks to its compact design, it is perfectly suited for changing workplaces and smaller paint booths. The unit enables clean and safe extraction of paint and solvent fumes, improves air quality, and ensures higher surface quality during painting. Technical data: Manufacturer: Schuko Model: 300 D Filter area: 1.23 m² Extraction nozzle: Ø 300 mm Air capacity: 4,500 m³/h Motor power: 2.5 kW Voltage: 380 V / 50 Hz Speed: 1,400 rpm Weight: approx. 125 kg Dimensions (L × W × H): 1,180 × 830 × 1,350 mm Condition: - Used, technically fully functional Ndodpfsxq Ev Asx Aa Ioc - Visually shows signs of use consistent with age - New filter mats included - Motor runs smoothly, unit ready for immediate use Special features: - Mobile on sturdy casters - Robust industrial drive - Integrated throttle valve at the outlet - Easy cleaning & filter replacement - Compact design – ideal for small painting areas A demonstration can be arranged upon request. Collection or shipping by freight carrier possible by arrangement.

Condition: good (used), Year of construction: 2000, Gebr. Esta Dustomat 62 Suction nozzle Ø: 160 mm Main motor: 3 kW Item description: mobile, CE mark, 3 KW, Ø=160 mm, Filter cleaning mobile separation container, Nominal volume flow 1,850 m³ / h Location: from stock 54634 Bitburg Nodpsvk Drtjfx Aa Isdc - immediately available -

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Cell (2021) with Inspection & SAR Automation Nodpexlgxujfx Aa Ijdc with SAR workpiece full tray infeed and empty tray return Epson LS10-B803S take off robot Kist + Escherish cleaning station with Wanderes air brush Kuka Cybertech 2 series robot with 2x tool stands & controller Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Helios Jetboxx WINsystem Turbo 50-75 stand alone dryer and trolley 2x Epson G10-451S placing robots with controllers Workpiece placing stand Rotary inspection table with camera, laser & Keyence scanner stations Kist + Escherich cleaning station and Wanderes air brush SAR workpiece full tray outfeed and empty tray return ESTA Dustomat 16M mobile dust extractor (2022)

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Nsdpfx Aov Sk Tmea Iedc Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Niebling HPF SAMK400 High Pressure Forming Machine (2022) with EEM module automatic film loading from magazine stack FAM module automatic removal of protective film SSR FIM2-607dr LC pro HPN ultra violet (UV) lacquer curing system with conveyor (2022) Kuka Cybertech 2 series KR 22 R1610-2/SEC robot with controller & 2x tool stands Niebling NST 100 Intelligent Servo Punch (2022) Ndsdpexlgwwefx Aa Ioc Kist + Escherich Taifun-Clean workpiece cleaning station with Wanderes brush Rotary inspection table with camera, laser station & Keyence scanner stations, Epson placing & take off robots with controllers ESTA Dustomat 16M mobile dust extractor SAR process automation and product magazine storage with RFID traceability

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Ndsdpfxow T U Uze Aa Isc Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Njdehkzttspfx Aa Ijdc Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Mobile Extraction drum Ndedpfxewb Hqxe Aa Ijc Availability: Immediately Storage location: 54634 Bitburg