Used Extruder Screws for sale (5,209)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. Godpfx Aogv I Iheh Hstt 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2023, condition: new, We are exclusive agent and distributor for China top class machine tools with stocks and Maintenance team. Here is Shenyang SYMG slant bed CNC turning lathe HTC 50P. Product description: 1. High rigidity feed system: In order to compensate for the elongation of the lead screw caused by the rise of the working temperature, and ensure the positioning accuracy of the lead screw and the system rigidity of the ball screw when it is used, the lead screw is pre-tensioned and pre-tensioned according to a certain thermal elongation before assembly to eliminate the impact of temperature rise on the accuracy. 2. High rigidity servo tool rest: Gsdpfx Ahei Ewi Ds Hjtt Adopt servo 12-position tool rest. The turret adopts servo-driven hydraulic locking mode, and the turret is silent, high speed, large torque and fast tool change. The locking cylinder inside the turret is matched with a precise concave and convex tooth positioner, which has high positioning accuracy for tool change, can convert the tool forward and backward, and can bear heavy cutting. 3. Slide rail configuration: HTC50 series optional sliding guide rail structure, higher rigidity, suitable for re-cutting, etc. Max. swing diameter 700/670/670mm Max.turning diamter ShaftΦ500/ DiscΦ550mm Max.swing diameter over slide 500mm Max.working length 1000/1500/2000mm Spindle hole diameter 104mm Spindle speed 35-3000 rpm Chuck diameter 12" X axis travel 320mm Z axis travel 1050/1550/2050mm 12 position turret. With FANUC system. This series SHENYANG CNC Slant bed lathe also with related types: HTC 40P, HTC40B, HTC 4050S, HTC 50E, HTC 50B, HTC 50P Just contact us if any further details are required.

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO TURBOMIX FULL AUTOMATIC MOBILE CONCRETE BATCHING PLANTS are ideal solutions for the projects that require short term and a compacted settlement on a dedicated job site. Since all the equipment of a concrete plant is assembled on a single mobile chassis, the plant can be moved easily by only one truck. Productivity of TURBOMIX mobile concrete plants vary from 30 m3/h to 150 m3/h. FABO TURBOMIX series of mobile concrete batching plants have automatic control, static/dynamic Load Cell Weighing of aggregate materials and additives. Concrete plants have qualitative and strong concrete mixer, which provides high capacity homogeneous mixture. TECHNICAL SPECIFICATIONS: Model: TURBOMIX 120 Production capacity: 120 m3 Dimensions (length x width x height): 17500 x 3200 x 4600 mm Mixer type: Twinshaft – 3 m3 Aggregate bunker: 4 x 25 m3 Transfer conveyor: 6600 kg Cement weighing: 1750 kg Additives weighing: 40 kg Water weighing: 1000 lt Total weight: 31460 kg Total motor power: 145 kW Cement silo is optional. Godpfxox Uqtwe Ah Hett Turbomix 120 consists of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2015, clamping force: 1,300 kN, Arburg 520S 1300-400 (2015) Clamping force: 130 t Screw diameter: 40 mm (higly wear resistant) Gtodpewv Hrxsfx Ah Hot Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Min/Max mould height: 350mm Opening stroke: 925mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic (Arburg servohydraulics) Hours: 28.000 hours only! \+ Apex Sprue picker robot 4 free cooling circuits Core pullers: yes

Condition: used, Year of construction: 2015, functionality: fully functional, height adjustment type: hydraulic, type of input current: three-phase, ambient temperature (min.): 5 °C, total height: 2,435 mm, total length: 1,740 mm, total width: 1,635 mm, power: 110 kW (149.56 HP), Wood Pellet PELLETIZER AMANDUS KAHL 38-780 (2015) (includes): Gedpfxsx Td Dae Ah Hott • Amandus Kahl 38-780 pellet press • Screw mixer • Water dosing system • Hydraulic unit • Roller lubrication system • Automatic press control system • Flat die with 6 mm holes FUEL PELLETS | 6 MM DIAMETER Manufactured from sawdust, wood chips, or lower-grade wood. This solution is ideal for companies seeking to streamline production steps and minimize disposal costs. The pellet mill features an automatic hydraulic roller gap adjustment system for precise product quality control. The machine is currently installed and connected—main electric motors and hydraulic unit can be powered up for on-site inspection. ADVANTAGES OF THE KAHL 38-780: - High Reliability: Designed for continuous, heavy-duty operation. - Long Service Life & Minimal Wear: Built for longevity and low maintenance. - Reduced Lubricant Consumption: Optimized for economical operation. - Fast and Easy Die Change: Minimizes downtime and simplifies servicing. - Compact Footprint: Saves space and enables flexible integration. - Low Noise & Vibration: Contributes to a comfortable and safe work environment. - Large Pan Grinder Chamber: Suitable for processing low bulk density materials. - Large Rollers with Low Rotational Speed: Provides gentle, uniform pelletizing. - User-Friendly Start-up: Hydraulic roller gap adjustment eases commissioning. - Vertical Product Feed: Ensures smooth and efficient material throughput. - Easy Maintenance & Remote Diagnostics: Facilitates servicing and fault analysis.

Condition: used, Year of construction: 2002, gebraucht 2002 Gtodpfx Ahjx Urrho Hot 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg Gjdpfegwa Urex Ah Hstt 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3230, overall weight: 1,22,000 kg, Vaccari PV410 Screw Press (1997) 1700 Ton Capacity Weight 122000kg Press Includes Electrotherm Vacuum Furnace for Heating Part Gtodpfx Asx Ap D Ieh Het 2 Robots for Loading/Unloading Parts and Components from Furnace to Press and Then Post Stamp Removal Vaccari PV Series General Description: Screw presses expressly designed for forging under severe conditions. Preloaded structure, longer O-shaped ram and optimum guiding are specifications making these presses ideal for forging also special alloy, complex shaped pieces, with multiple sequences and with single or multiple-impression dies Furnace ref no. 77, Robot ref no. 1977 Fanuc R-30iB / M-10iA (2013) included with machine Sublocation - South Forging Press.

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Gedex Tti Sopfx Ah Hjtt Safety door Ethernet interface

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, Clamping force: 170 t Screw diameter: 45 mm Distance between tie bars V: 520 mm Gtsdpsx Ury Esfx Ah Hot Distance between tie bars H: 520 mm Type: Horizontal Drive: Hydraulic

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Godpex Sz D Ijfx Ah Hott Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 Gtsdpew I R Tiefx Ah Het TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. Godpfx Aox Uplxjh Hstt • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Rotation speed: 5000 rpm Shank diameter: Φ10mm Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm

Condition: excellent (used), For sale: professional milling tool holders from the brands HOLEX (Hoffmann Group) and ORION. • Type SK40 Ø6-50 (Weldon – side screw) • Standard DIN 69871 AD – central cooling through spindle • Clamping diameter: Ø6 mm • Length: 50 mm • Balancing G 6.3 – up to 12,000 rpm (HOLEX) • Very good condition, used – fully operational • Some holders are sold with milling cutters/drills included. Gjdpfx Ahexcgzdo Hstt

Condition: good (used), Year of construction: 2004, Clamping force: 110 t Screw diameter: 40 mm Distance between tie bars V: 465 mm Distance between tie bars H: 465 mm Gtjdpfjx Urxnex Ah Hot Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs Godsxzhxnspfx Ah Hett - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Clamping force: 80 ton Screw dia: 40mm Weight 3400 kg Gsdouy Sdtepfx Ah Hott Machine used for Bakelite production (DUROPLAST)

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Gjdpoxl Hpgofx Ah Hott Clamping force: 50 t Screw diameter: 25 mm Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 (2015) Clamping force: 550 t Screw diameter: 62 mm Distance between tie bars V: 920 mm Gsdpexbd R Hofx Ah Hett Distance between tie bars H: 1020 mm Mold thickness : 600-1050 mm Opening stroke max: 901 mm Injection pressure: 2400 var Injection volume: 749 cm3 Shot weight: 718 g Hot runner controlers: 16 x Hydr. corepullers: 2/3 (fixed/moving platten) Type: Horizontal Drive: Hydraulic Price:

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Distance between tie bars H: 405 mm Godpewufwqefx Ah Hjtt Injection pressure: 1837 bar Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2012, clamping force: 1,000 kN, Equipment: documentation/manual, Fanuc S2000 i 100B (2012) nr. 23 Godpfxsx Uqrye Ah Hott Clamping force: 100 t Screw diameter: 40 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Type: Horizontal Drive: Electric Hours: 32426

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, Clamping force: 160 t Gsdpfx Ahox Up T No Hstt Screw diameter: 45 mm Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2005, clamping force: 2,600 kN, Tiebarless Engel Victory 1800/260 Tech (2005) Clamping force: 260 t Screw diameter: 60 mm Shot weight: 687 g Shot volume: 763 cm3 Platten size: 1100 x 700 mm Mold height: 400 mm Gjdowu H A Uspfx Ah Hott Maximum daylight: 2300 mm Dimensions: 6600 x 2035 x 2300 mm, weight: 19,4 t \+ Robot ERC Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2015, Demag Systec 100/420-310 (2015) Panel: NC5 Gsdpjx Tdwysfx Ah Hstt Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic extra equipment: Gtodpfex Tdp Nex Ah Hst 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment