Used Extruder Screws for sale (5,180)

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder • Water Cooled 130kW AC Motor and Drive. Hsdpfjw Snlwsx Adwong – Low Noise

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Hnsdpfeuziyhjx Adweg Very good condition

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hnjdpfx Aoxnpx Nedwsg

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer Hedpohgq Ahofx Adweng - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, working height: 950 mm, conveyor belt speed: 833 mm/s, conveyor belt thickness: 7 mm, cylinder diameter: 190 mm, TECHNICAL DETAILS Working dimensions: 70 - 4000 mm Leg length: 5.0 mm to 12.0 mm Profile height automatic: 4.0 mm to 24 mm Profile height manual: up to 35 mm Butyl cylinder Butyl cylinder diameter: 190 mm Butyl cylinder length: 250 mm Butyl cylinder volume: 7.5 l Operating temperature butyl: 100°C to 140°C MACHINE DETAILS Working height: 650 mm to 950 mm Conveyor belt height: 0 mm to 7 mm Conveyor speed: 5 m/min to 50 m/min Hnsdpfx Ajxur Awjdwog Connected load: 5 kW Compressed air consumption (for 1 m × 1 m frame): 23 standard litres Air consumption when refilling butyl: 300 standard litres/min Pneumatic input pressure: 6.5 bar to 8.0 bar Pneumatic operating pressure: 6.5 bar Maximum butyl extrusion pressure: 280 bar Maximum operating pressure: 300 bar EQUIPMENT Butyl cylinder Conveyor belt Pneumatic system

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Hnodpfx Adevuquvjwsg

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Hodpfx Adsxq Exqjwong

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control Hnjdpjuhpiyofx Adwsg - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm Hnodsw Tbr Hjpfx Adwog one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) Hjdpfx Aewngagodwjng For Silicone Hydraulic Very good and clean condition As is Available immediately

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 Hedepaiaijpfx Adwong POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 17137, CNC machine with 0 operating hours. Hnedpfxew H N Nze Adwjg

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Hodpfxju Itqdo Adwong

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Hedpfsurvzrox Adweng Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Hnsdpfx Adoxn S Umsweg

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Hsdpfx Ashupkmjdweng Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Year of construction: 2019, condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. Hedpfx Aevlxufsdwjng In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Model: PRP-500

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2.065.0, clamping force: 200 kN, New digital control from BBM. Two sets of extruder heads (see attached pictures). Hnjdow Dcybspfx Adwog

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control • Control cabinet integrated into machine frame • Separate operating panel with control interface • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement Hedow Iqhmopfx Adweng

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hex head screws: M27 267 kg -Sizes/number: M27 x 120 / M27 x 140, see photo parts list -Grade: 8.8 Zinc Plated -Manufacturer: Cleff Hjdpsiwuyvsfx Adweng -Price: complete -Total weight: 267 kg

Condition: used, Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder Hnodpet E D Nksfx Adwog -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw Hnedpoiqpyqefx Adwjg -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

Condition: used, Screws, hexagonal screws, flange nuts, hex nuts, collar nuts, solar fasteners, socket head screws -Hexagon head screws/cylinder screws: M 10 stainless steel 330 kg -Hexagon head screws: DIN 933 M10 x 100 300 pieces / M10 x 20 4400 pieces. -Cylinder screws: DIN 912 M8 x 35 6600 pieces / M8 x 30 4200 pieces -Material: A2 stainless steel -Price: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg Hedoq Nqxdjpfx Adwong

Condition: used, Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Number: 3x replacement screws for injection molding machines -Price: complete -Execution: stable -Screw lengths: 1600/1560/1320 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Holder: Ø 55 x 75 mm -Transport dimensions: 1600/120/H100 mm Hnsdpfx Aectyq Esdwog -Weight: 90 kg

Condition: good (used), Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. Hsdsv Ux Nbspfx Adweng -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg