Used Fabric Dust Collector for sale (7,864)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm Maximum volumetric flow: 3200 m³/h Rated volumetric flow: 2262 m³/h Volumetric flow monitoring: differential pressure indicator Negative pressure: 2250 Pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 dB Chip collection bag volume: 320 l Blsdpfxek Utq Is Amnsi Filter cleaning: motorized Motor power: 4 kW Machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 385 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg Bledpfx Amjhpmawenoi

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146 Bsdpfxezd Twbs Amnoli

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes Blsdpfxey Av H So Amnji • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture Bledpjy Avg Ejfx Amnsi • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction Blsdsy Au Hqepfx Amnsi • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. Bedpey Au Alefx Amneli The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Bjdpfx Amey Alcijnsli Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning Bledpfxsxpximo Amnsi - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system Blsdpfowzyh Rjx Amnsi - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Bledpeu R Tb Uofx Amnei Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 300 mm, Nozzle: 5 pieces, Bedpfx Amou R S Uyonoli nozzle diameter: 160 mm

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Bljdpju R S A Refx Amnji Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: Bodpex H Dahjfx Amneli - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 3734, Equipment: CE marking, DANTHERM Filtration dust extraction and welding fume extraction system. This vacuum extraction system is ideal for welding processes, plasma cutting, laser cutting, sandblasting, shot peening, plastic processing, and the removal of all types of dry dust. Bledpfx Aszh T S Tjmnoi The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The set includes a complete set of automation equipment, an electrical distribution panel, connecting elements, and a silencer. Additionally, we can provide individual workstation extraction units. Fan power: 15 kW – smooth, frequency inverter-controlled operation. Capacity: up to 9500 m3/h. Vacuum: up to 4000 Pa.

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Bljdpjy R E Uusfx Amnei Availability: short notice Location: Hochheim

Condition: used, Year of construction: 2021, Year of manufacture 2021 Dimensions and weights Length (product) approx. 1700 mm Width/depth (product) approx. 600 mm Height (product) approx. 2400 mm Weight (net) approx. 69 kg Chip collection volume 2 x 215 l Nominal diameter of suction nozzle inlet: 260 mm Nominal diameter of suction nozzle outlet: 2 x 100, 2 x 120 mm Electrical data Bledpfowb Ekdex Amnji Idle speed 2950 rpm Supply voltage 400 V Mains frequency 50 Hz Power input 3.8 kW Power output 3 kW Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Voltage flow Nominal flow rate 4300 m³/h Vacuum pressure max. 2000 Pa SCOPE OF DELIVERY Fine filter bag Two bags of shavings Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2016, used dust extractor Year of manufacture: 2016 Extraction capacity approx. 3500 m³/h Motor power: 3 kW Connection nozzle: 200 mm with 2 chip bins mobile steel fan impeller Dimensions: approx. 2000 x 750 x 2150 mm Availability: short-term Storage location: Flörsheim Bsdoyuld Nopfx Amnjli

Year of construction: 2022, condition: used, Colour: Silver Empty weight: 800 kg Dimensions (LxBxH): 480 x 200 x 240 cm - Year: 2022 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4329 - Suitable for material: Wood dust - Type of extraction: Underpressure installation Blodpoy Tlpksfx Amnoi - Main fan [pcs]: 2 - Main fan power [kW]: 7.5 - Number of filter bags [pcs]: 5 - Filter length [mm]: 1100 - Filter diameter [mm]: 520 - Filter surface area [m²]: 9 - Connection diameter [mm]: 520 - Number of connections [pcs]: 5 - Options: Knock-off system - Transport dimensions: 4800mm x 2000mm x 2400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Bledezg Tu Sspfx Amnji Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2001, condition: used, machine/vehicle number: A 01 02 004/ 0300, - Manufacturer: Venjakob - With dust cover including folding doors - Connections for ventilation and air release - Fully covered under the rollers - Year of manufacture 2001 - Working width 1,300mm - Working height: 900 +- 20mm - Roller diameter: 80mm - Roller pitch: 140mm Bljdpozf N Rmofx Amnji - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg Bljdpfszf N Ekex Amnoi - Also available for assembly with roller or belt conveyor

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Bedpfxszgbtis Amnsli Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Bodox Edmpjpfx Amnoli Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Year of construction: 2023, condition: new, functionality: fully functional, 2 new CIMBRIA MODUFLEX F300JYMS/28 ATEX II 20/22 for sale. They were never installed due to plan modifications. - Designed for dust-free out-loading of dry bulk material. - For tanker trucks, flatbed trucks, open and closed rail wagons, and containers. - Engineered for heavy-duty performance, long-term durability and high capacity. - Available models for virtually any dry bulk product, including agricultural, industrial commodities and raw materials. Also for sale separatly. For additional pictures, please contact. Bodovwl Rqjpfx Amnoli