Used Facing And Centering for sale (18,624)

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 14-1332-015/23270, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 14, controller manufacturer: OSAI, total height: 3,000 mm, total length: 5,400 mm, total width: 3,200 mm, overall weight: 4,100 kg, controller model: OPEN, spindle motor power: 12,000 W, nominal power (apparent): 28 kVA, number of spindles: 1, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, CNC AES Vega Ultra 1332, purchased new in March 2024. Machine has seen minimal use and is in like-new condition. Fully functional, tested, and ready for immediate production. Original purchase price: €85,000+ Key Specifications 3-axis Gantry CNC (Pod & Rail) with 2 independent working zones Nodpfx Aowlaxqog Noku Working area: 3200 × 1300 × 300 mm Maximum speeds (X / Y / Z): 100 / 100 / 20 m/min Automatic Tool Changer: 14 positions, HSK-63F Spindle: HSD 12 kW, air-cooled Boring head: HSD BHZ17 Controller: OSAI Open Smart Premium Components Yaskawa servo motors Güdel linear guides Festo pneumatics Schmalz vacuum system HSD spindle & aggregates High-end European components throughout, suitable for demanding industrial use. Installation & Support Remote or on-site installation support available if required. Commercial Details VAT: not applicable (reverse charge possible) Reason for sale: downsizing for family reasons Machine can be inspected under power. Additional photos, videos, or technical details available on request.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Machining Center – Horizontal (pallet design) Brand: KOLB | Year of manufacture: 1996 Total operating hours: approx. 100.000 h Condition: Fully functional (moderate repair work required before installation) The machine can be inspected by appointment. TECHNICAL DATA: - Position of main spindle: Horizontal - Design: Pallet - Clamping surface: 2.000 x 2.500 mm - Speed: 6.3 - 2.500 rpm - CNC control: SINUMERIK 840D sl - Table/pallet travel: 4.000 mm * Workpiece weight: max. 35 tons - Rotary table: * Table rotation via NC axis: 360° (degrees) * Additional indexing: 4 x 90° (degrees) * Working area: 4.000 mm * Workpiece weight: max. 35 tons Column/portal: * Column adjustment: 1.750 mm Drilling and milling slide: * Y-axis (milling slide travel): 3.000 mm * Z-axis (milling slide stroke): 1.000 mm, RAM: 1.250 mm - Rapid traverse V-axis (transverse movement of the carriage): 120.000 mm/min Nksdpfsynb Svjx Ag Nju - Chip conveyor Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: used, Year of construction: 2006, Machine in operation from 2008. Control – FANUC 0M 2 pallets One pallete dimension – 650x420 mm Axes – X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Nsdpjyl U Uxjfx Ag Nsku Machine area 2500 x 2100 mm. Machine weight 3900 kg

Condition: like new (used), Year of construction: 2019, used vertical CNC machining center Manufacturer: Homag Model: Drillteq V-500 Edition25 Main operating hours: approx. 1,800 hours Working range X: 200 – 3,050 mm Working range Y: 70 – 850 mm Working range Z: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 15 pcs Horizontal drilling spindles in X: 6 pcs Horizontal drilling spindles in Y: 4 pcs Grooving saw, swiveling 90° Grooving/milling unit for Clamex-P Dowel insertion stations (white glue) Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet chuck Workpiece length: 3,050 mm Workpiece width: 50 – 1,250 mm Nodeymz Rvspfx Ag Neku Workpiece thickness: 8 – 80 mm; max. 60 kg weight CONTROL: POWERCONTROL PC86 power touch with FullHD multitouch display 21.5″, operating system Windows 10 Network connection, Tapio ready, fully prepared WoodWop 7.0 incl. MDC and production list software Basic barcode reading system Delivery includes only all tools and HSK holders shown in the photos!

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame Nkodpfx Agsymzfgj Nou X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area 2,893 x 950 mm 6 traverses with 12 suction cups Milling spindle with ISO 30 tool holder, 3.6 kW, Drilling unit: Nkjdpfxoymmr Eo Ag Nju 10 vertical drills 6 horizontal drills Grooving saw, 6-position tool changer. Control unit N500 Color display Total connected load: 10 kW 400 V, 50 Hz

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine is currently operating in an Italian high-end facility specializing in individual components and custom manufacturing for Formula 1 as well as the aerospace sector. The machine is in exceptional condition. Photos are available upon individual request and under strict confidentiality. Nksdpsynmglofx Ag Nou CNC turning/milling center (multitasking) with full 5-axis simultaneous machining - 2 turning spindles (main spindle + sub spindle) - B-axis milling head (swivelling milling head) + C-axes on both turning spindles - Designed for complete machining (turning + milling + drilling + threading + contouring) Working area / capacities: - Max. turning diameter: 640 mm - Max. turning length: 1,100 mm - Distance between spindle noses (min./max.): 250 / 1,350 mm - Distance between centers (min./max.): 125 / 1,225 mm - Bar capacity / spindle bore: 71 mm - Chuck diameter (typical for A2-8 configuration): 254 mm (10") Main spindle (left): - Spindle nose: A2-8 - Bar capacity: 71 mm - Speed range: stepless up to 4,500 rpm - Spindle power (depending on spindle package): approx. 22/18.5 kW (alternatively 15/11 kW available depending on package) Sub spindle (right): - Design: fully-fledged sub spindle (workpiece transfer/complete machining) - C-axis available (for milling/indexing operations) - Clamping device: hydraulic chuck (compatible with A2-8 configuration, typically 10") Milling unit / 5-axis kinematics: - B-axis swivel range: 225° (−120° / +105°) - Y-axis: ±125 mm (250 mm total) - X/Y “square stroke” / machining window: 250 mm × 250 mm - X-axis undercut below spindle center: 125 mm (for extended machining range) - C-axis on main and sub spindle (C1/C2) Tool / milling spindle (typical version): - Milling spindle in B-head for drilling/milling/threading/simultaneous machining - Speed (depending on package): approx. 8,000 rpm (higher speeds optionally available) - Power (depending on package): typically up to 18.5 kW (package dependent) Tool handling: - Automatic tool magazine (ATC): 120 positions - Automatic tool changer (magazine/ATC) Control / software: - Nakamura NT-Smart X user interface / process management - 5-axis capable CNC platform (CAM-compatible complete machining, simultaneous machining) Typical applications and process capability (for your listing): - Complete “done-in-one” machining: turning + milling + drilling + threading + 5-axis contours

Condition: excellent (used), Year of construction: 2016, operating hours: 10,250 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 800 mm, table length: 630 mm, table load: 1,400 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,250 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel Paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Dynamic version linear axes IKZ (internal coolant supply) 80 bar with variovalve Scraper belt conveyor Tool changer plus Additional tool magazine ZM50 for a total of 92 tool stations Manual cabin door Manual cabin roof Laminated safety glass window Comfort operator panel External minimum-quantity lubrication Tool measurement A2 Blum (tool breakage/measurement) 3D probe M&H Internal air blow External air blow Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Nedpfx Aeyma Nksg Noku Electronic thermal compensation with control functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visibility aid and more… The machine can be inspected under power by prior arrangement. Machine is immediately available! Loading will be handled by us!

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Nodpfx Agew A Nnpo Nsku

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, inner diameter: 260 mm, wall thickness: 10 mm, overall weight: 870 kg, year of last overhaul: 2025, operating temperature: 100 °C, Decanter centrifuge, 5500 RPM, 1.5 m³/hour, 11kW, refurbished, bearings replaced, liquid discharge under pressure, in excellent working condition, documentation available = 18,500 EUR Njdpfx Aexlpwteg Noku Decanter WESTFALIA CA 22.00.00 in excellent condition (green unit) = 22,000 EUR

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm Nsdpfxeym Dz Ro Ag Nsku T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm Nedpfxoynnu De Ag Noku z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Njdpfx Agoxy Tmno Noku

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Nedpfxjxy Tlwo Ag Neku

Condition: good (used), Year of construction: 2000, operating hours: 18,082 h, functionality: fully functional, machine/vehicle number: 1098000194, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 46 kVA, controller manufacturer: HEIDENHAIN, total height: 3,200 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 20,000 kg, operating hours of spindle: 10,403 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 125 P Universal Machining Center - Tool holder: SK 40 - Table with 9 T-slots The machine is equipped with a 60-position tool changer, including the tool holders shown in the photos installed in the tool magazine, as well as a chip conveyor and coolant system. Attention: Machine vises shown in the photos are not included! Nkodpfx Asym Snrsg Nsu Attention: The machine will be disassembled for transport to a width of 2900 mm (removal of tool changer). Attention: The item must be collected on a binding date agreed between 21/04 and 30/04/2026. FCA D-96257 Marktgraitz – loaded onto truck.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table Nedpfx Aeym Smbsg Noku - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: excellent (used), Year of construction: 2007, operating hours: 36,900 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 28,000 rpm, 5-axis machining center Manufacturer: Hermle Model: C30U Year of manufacture: 2007 Control: Heidenhain iTNC-530 Power-on hours: approx. 36,900 h Operating hours: approx. 10,760 h S/N: XXXXX Technical parameters: ----- • Travel X-Y-Z: 650 x 600 x 500 mm • C-axis: 360° • A-axis: +/-115° • Tilting rotary table Ø280 mm • 6x rotary union • Spindle: 28,000 rpm • Tool magazine: 32x HSK-A63 • Standard coolant system • 3D probe Renishaw • Option: Air blast through spindle • Option: Glass scales with purge air • Option: Electronic thermal compensation • Chip tray • Weight: 9,500 kg Accessories: ----- • Documentation • Rinsing gun • Handwheel • Holder package: 20x HSK-A63 tool holders Njdpfjynb S Njx Ag Noku

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 Nodpfxeym Sd Ts Ag Neku - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: excellent (used), Year of construction: 2011, operating hours: 25,870 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Centre Manufacturer: DMG Model: DMU-60 Evo Control: Heidenhain iTNC-530 Year of manufacture: 2011 Operating hours: 25,870 h Spindle hours: 7,250 h S/N: 154XXXXX Technical Data: ----- • Travels X-Y-Z: 600 / 500 / 500 mm • Rotary table: 600 x 500 mm • Spindle: 20 - 18,000 rpm (130 Nm) • Tool magazine: 30x HSK-A63 • Option: 3D probe TS-641 • Option: Laser bridge for tool measurement • Option: Chip conveyor • Weight: 10,000 kg Accessories: ----- • Manuals Nkedoynb Spjpfx Ag Nou • Rinsing gun • HSK-A63 holder package (20 pcs.) • 3D Quickset

Condition: excellent (used), Year of construction: 1998, operating hours: 54,400 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: 426, spindle speed (max.): 30,000 rpm, 5-axis machining center Manufacturer: DMG Model: DMU-50V Year of manufacture: 1998 Control: Heidenhain TNC-426 Power-on hours: approx. 54,400 h Spindle hours: approx. 12,900 h S/N: XXXXX Technical data: ----- - Travel X-Y-Z: 500 x 380 x 400 mm - NC rotary/swivel table 360° / 500 x 380 mm - Spindle: 30,000 rpm - Tool holder: HSK-50 - Tool magazine: 24 stations - Coolant system - Chip conveyor: no - Automatic tool measurement - Connected load: 26 kVA - Weight: approx. 4.0 t Accessories: ----- - Manuals - Electronic handwheel Nedjynb Iqjpfx Ag Njku - 20x HSK-50 tool holders

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Nkedex Dci Topfx Ag Neu Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Available immediately.

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm Nedpfxjynk Ugs Ag Njku table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI Nkodpfoynk Tijx Ag Nju

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Njdpsynk Tcefx Ag Njku Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm Nkjdpfx Agsynk Srj Nju turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements