Used Facing And Centering for sale (19,255)

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm Dcsdpfxeu Iww Uo Afpjc workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm Dodpfotxku Ijx Afpecc -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver Dcjdei I Hc Aspfx Afpsc -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver Djdpfx Afeuza N Topecc -Front face driver: Mount: MK4 -Front dimension: Ø 19 mm -Dimensions: Ø 34 x 162 mm -Weight: 0.6 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 20 mm -Dimensions: Ø 42 x 203 mm Dcodsuwgf Hopfx Afpoc -Weight: 1.0 kg

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg Dcodpohm Uabsfx Afpjc

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos Dcodpfsrv Avnsx Afpec -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a Dcsdpfx Afsi Hmpbspoc -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 32 mm Dedpfjm U A Eiox Afpecc -Dimensions: Ø 55 x 212 mm -Weight: 1.8 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 Dcsdpfx Aforv Avgepoc -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm -Weight: 3.5 kg

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver, roller tip -Manufacturer: Neidlein, face driver mount: MK5 -Type: OEX 5 Dodpfx Afsu Tlg Eepscc -Front dimension: Ø 39 mm -Dimensions: Ø 75 x 185 mm -Weight: 2.6 kg

Condition: used, Machine for centering shafts, etc. 2 units available. 1x manufacturer Inpro, 1x manufacturer unknown. Both machines are operational and ready for immediate use. Sale price per machine: 1x €2,000, 1x €2,500. Dodpfx Aoycfb Rofpocc

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 600 mm z-travel 500 mm weight of the machine ca. 18500 t dimensions of the machine ca. 5400x3800x3300 mm Total power rating: approx. 133 kVA Backup fuse: 250A Compressed air quality according to ISO 85731: purity class 4 Connection pressure: max. 9.5 bar Operating pressure: min. 7 bar Number of spindles: 2 Spindle arrangement: vertical, side by side Spindle distance: 600 mm Spindle with max. 12,000 rpm Spindle bearing diameter: 90 mm Start-up time: 0-10,000 min-1 approx. 0.8 s Travel distance X-axis: 600 mm Dcedpoyan Saofx Afpjc Travel distance Y-axis (alternating position): 600 (875) mm Travel distance Z1, Z2 axis: 500 mm Tool change system: Pick up Tool spindle: HSK 80 Tool positions: 70 Max. tool diameter: 90 mm Max. tool length: 540 mm Max. tool weight: 10 kg Max. magazine load: 350 kg

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Dodpfx Afelqac Sopocc *

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver Dederv Au Hopfx Afpjcc -Manufacturer: ABW, face driver -Type: MS6 -Front dimension: Ø 90 mm -Recording: see photos -Total dimensions: Ø 110 x 315 mm -Weight: 8.5 kg

Condition: good (used), End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm Dcodpex H Ip Hjfx Afpsc -Total weight: 2.4 kg

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm Dcjdpfx Afewwl I Iepec total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm Dcodpfovp Sd Iex Afpjc - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, Dodpfx Ajri Sicefpecc - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Dodslatz Djpfx Afpecc Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Dcjdpfx Afok Eakvopec -230 V -0,7 A -50 Hz -IP 65

Condition: new, functionality: fully functional, Year of construction: 2025, There are several types of ball mill grinding plants designed for different applications and industries. The choice of the specific type depends on factors such as the material being processed, the desired final product characteristics, and the production capacity required. Here are some common types of ball mill grinding plants: 1. Open Circuit Ball Mill: - In an open circuit ball mill, the material passes through the mill only once, and the finished product is obtained directly. This type is suitable for dry grinding and often used for cement grinding. 2. Closed Circuit Ball Mill: - Closed circuit ball mills have a separator, which separates the fine particles from the coarse ones. The coarse material is returned to the mill for further grinding, while the fine product is collected and sent to storage. This type is commonly used in mineral processing circuits. 3. Overflow Ball Mill: - Overflow ball mills discharge the slurry over a trunnion at the discharge end. This type is suitable for wet grinding or when the slurry has a high moisture content. 4. Grate Discharge Ball Mill: - Grate discharge ball mills discharge the slurry through the grate at the discharge end. This type is suitable for dry or wet grinding and is often used for grinding materials with high moisture content. 5. Peripheral Discharge Ball Mill: - In a peripheral discharge ball mill, the grinding chamber is larger at the feed end, allowing the material to be discharged peripherally. This type is suitable for coarse grinding and often used for rod mills. Dcjdpeq Nx Alofx Afpjc 6. Planetary Ball Mill: - Planetary ball mills are designed for high-energy milling and are suitable for both dry and wet grinding. They have one or more grinding jars that rotate around a central axis, creating a planetary motion. This type is often used for laboratory applications. 7. Ball Mill with Ceramic Lining: - Some ball mills are lined with ceramics to reduce wear on the inner surface of the mill. This is particularly common in the production of ceramic materials, pigments, and refractories. 8. High-Energy Ball Mill: - High-energy ball mills use mechanical alloying processes to create new materials. These mills operate at high rotational speeds, causing the balls and the material being ground to impact with high energy. They are suitable for milling hard and brittle materials. 9. Air-Swept Ball Mill: - In an air-swept ball mill, the material is fed into the mill with ambient air, and the finished product is collected in a dust collector. This type is commonly used for coal grinding in the cement industry. 10. Tube Mill: - Tube mills are long cylinders with a charge of steel balls used for grinding raw materials, coal, and clinker. They can be open or closed circuit and are widely used in cement and mineral processing industries. 11. Continuous Ball Mill: - Continuous ball mills operate continuously, and the material to be ground is fed at one end and discharged at the other. These mills are suitable for grinding materials in a continuous process.

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Dcedpfx Afjlkc U Espjc

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Dodpfx Afowzvl Sopocc

Condition: used, Year of construction: 2010, functionality: fully functional, Used Mark compressor with dryer. Used, in good working condition. Ready for pickup. Dedpfx Afewprviepocc