Used Fan Blower for sale (4,434)

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Air volume: 2050 m³/g Motor: 230 V, 50 Hz, 145 W Lsdpfx Astty Nnedworg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a converted overseas shipping container equipped with a Herz Firematic 130 boiler system. The heating unit has a capacity of 130 kW and is connected to a Lauber heat exchanger. Additional doors have been installed in the heating container to facilitate maintenance and inspection, ensuring easy access to the system. The boiler is fired with wood pellets, and the integrated pellet bunker holds approximately 1.5 tons. Both the heating container and the Lauber unit must be dismantled prior to transport, but thanks to the container design, they can be easily loaded for relocation. The interior of the heating container is lined and treated with a special coating to prevent condensation drip formation inside. The Lauber unit installed is a Lauber Energy Utilization Center type L-ENZ 80+ (5.50 kW fan). Both machines are in nearly new condition with only minimal operational use. The total operating hours are currently 3,577, which equates to approximately 149 days of operation. Both units were manufactured at the end of 2022 and have been in use since around May 2023. What is this system suited for? It can be used for heating halls, buildings, construction sites, etc., as well as for drying bulk or natural materials such as wood, wood chips, horse manure, or any free-flowing bulk goods. Ljdpfoybbphox Adwsrg Please note: The drying boxes shown in some of the photos were part of our operational setup but are not included in this offer. For further details on dimensions, weight, and loading, please refer to the attached technical drawings.

Condition: excellent (used), Blower Stand - ROBOX2 Lodpfsrn S Hljx Adwsrg Robuschi blower - RBS45 no 06-42934 ES 45/2V- RVV8

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Lodpfeycxh Rsx Adwsrg Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Slow-running approx. 1400 rpm Motor: 11 kW Connection diameter: 400 mm Pressure approx. 1836 m³/h Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee Lrodpfx Aeycxh Dedwjg

Condition: used, used, in good condition, low hours Manufacturer: Schuko Type: L 350 Machine no.: 0-90390 Slow runner, approx. 1400 rpm Motor: 11 kW Connection diameter: 350 mm Pressure approx. 2229 m³/h Airflow: 9640 m³/h Steel impeller Required space approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Lsdpfx Adeycxgyeworg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: new, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: Lsdpfx Adevugrdswjrg MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: new, Year of construction: 2025, Thermal winding protection against overload. The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee stable and vibration-free operation of the unit. The most powerful radial fan FAN11 achieves an output of up to 15445 m3/h. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its design and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation . The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, Lredpfx Asvugfwedweg manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities

Condition: new, Year of construction: 2025, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. Lodevugh Espfx Adwsrg The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €4,606 – 60% discount 1 unit Ledexuwqgjpfx Adwsrg RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection.

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, navigation system, soot filter, Options: - LED headlights, cornering lights, and bumper-mounted fog lights - Windshield made of double-layer laminated glass with sun protection film - Double-glazed window in the rear of the cab - Double-layer safety glass - Reversing camera - Luxury sleeper cab - Additional lower window in passenger door - Floor plate - LED headlights - DAF Corner View - Cab color: E1980WHTE - Leather-covered steering wheel - Refrigerator - Automatic climate control - Electrically operated roof hatch - ECAS remote control - Foldable cinema-style passenger seat with table function - Xtra Comfort sprung mattress, 150 mm thick, for lower bunk - Auxiliary and engine heater with heat recovery pump and timer - Super Air air-suspended driver’s seat - Adjustable armrests on both sides of driver’s seat - LED interior lighting - Dashboard version: Vision - PACCAR Connect - Digital tachograph VDO - DAF Infotainment System: Exclusive - Standard antennas: AM/FM/DAB/DAB+ - Wireless charger - Acoustic reversing warning system - Turn assist - Axle load monitoring - Axle load limiter 11.5 t - Lift device for steered trailing rear axle - Front axle: Tire size 315/70R22.5 - Driven rear axle: Tire size 315/70R22.5 - Trailing axle: Tire size 315/70R22.5 - Engine MX-11, power: 330 kW – 449 hp at 1600 rpm - ECO performance - Traction aid 15.0 t - Driven rear axle with mechanical differential lock - Rear axle ratio 2.47 - Automated direct-drive transmission TraXon 12TX2210, ratio 16.69-1.00, 12 gears - Emissions standard Euro 6 - Idle shutdown, after 5 minutes idling - Automated transmission, TraXon, 12 gears - Maneuvering mode - MX Engine Brake, exhaust brake and ZF Intarder - Spring-loaded brake cylinder, 1st front axle - Parking brake assist - Pneumatic control for parking brake - Longitudinal frame height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 545-liter aluminum fuel tank - Rear LED tail light - Wheelbase 4.80 m / rear overhang 2.70 m - Rear underride guard - Exhaust pipe right-hand side - Drawbar cross member with Ringfeder trailer coupling - Pneumatic connection - Hard-wired body signals and warnings - Connector for hard-wired engine speed control - Preparation for aftermarket switches - CAN J1939 functions Ledpoyc Afgsfx Adwerg - ECAS control - Body mounting method BAM 1, console type B - First gearbox PTO, type N../10c - Dust shield - Vision Package Superstructure: ZANNER platform body with rear mounting for supplied FASSI loader crane Dimensions: Approx. clear: 6,600 mm long / external: 6,720 mm long 2,480 mm wide / 2,550 mm wide Side wall height 1,000 mm Front wall height 1,600 mm Bevelled floor frame profile with perforation grid, permitted lashing force 2,500 daN Forklift impact protection Floor made of 27 mm thick plywood panels All sideboards foldable Without tarpaulin insertion profile Sideboards divided once on each side Fold-out steps - Stainless steel toolbox - Additional Duomatic connection side of road - One LED work light each on right and left at the rear, switched to reverse gear - UVV stability test for loader crane Crane: F215AC.2 dynamic Slewing range 400° Double linkage system with PROLINK (over-extendable knuckle boom up to 15°) Electronic overload cut-off device with FX500 Emergency stop, as well as optical alarm (90% and 100%) Including adjustable digital slewing limiter Pressure limiting and load holding valves, high-

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm Lrjdpju Nww Dofx Adweg *

Condition: used, Technical details: Ledpfju Nvz Iox Adwjrg revolution per minute: Motor: 1475 U/min voltage: 400 V / Hz total power requirement: 4,6 kW AXIAL fan inside Ø 600mm Flow rate 3,30 m³/s Pressure 600 Pa Siemens motor protection IP54 External control *

Condition: used, functionality: fully functional, machine/vehicle number: XLRAS47MS0E909300, mileage: 14,45,000 km, first registration: 07/2011, fuel type: diesel, empty load weight: 12,800 kg, maximum load weight: 13,200 kg, overall weight: 26,000 kg, tire size: 315/70, tire condition: 50 %, axle configuration: 6x2, wheelbase: 6,100 mm, axle spacing: 6,100 mm, brakes: intarder, gearing type: automatic, emission class: euro5, suspension: air, total length: 12,000 mm, total width: 2,600 mm, loading space length: 9,600 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2011, Equipment: additional headlights, air conditioning, central locking, cooling unit, fog lights, onboard computer, parking heater, retarder, seat heater, tail-lift, traction control, Year: 2011 Mileage: 1,445,000 km Automatic transmission ZF Intarder Tyres 315/70 (385/55 front) – Alloy wheels 6x2 wheelbase 6,100 mm – 3rd intelligent axle Full air suspension Fridge box in cab Isothermal LAMBERET FNA 04-2026 body Internal dimensions: 9.60 x 2.46 x 2.60 m CARRIER SUPRA 950 ANTEOC tail lift, 3,000 kg capacity Ledpfeyazq Nsx Adwerg Payload: 13,180 kg

Condition: excellent (used), For sale: Professional TEMPEST DD21 positive pressure blower, commonly used by fire departments, industrial facilities, paint shops, warehouses, for emergency ventilation, and anywhere extremely high air flow capacity and reliability are required. The unit is fully operational, powerful, and ready for work. The motor and control panel are EX (explosion-proof / ATEX) rated—this is a premium device rarely available on the secondary market. ————— Technical data: • Brand / Model: TEMPEST Power Blower – DD21 • Manufactured in: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW Ledpfxexyugpe Adworg  – EX class: EEx e II T3  – Speed: 2850 rpm • Certification:  – AMCA CERTIFIED (certified air performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large metal impeller with very high efficiency ————— General condition: The unit is well-maintained, fully functional, and from a professional facility. Typical signs of use, but technically and structurally in very good condition. ————— Applications: • Fire departments – positive pressure ventilation • Warehouses, industrial halls, paint shops • Extraction of smoke, dust, fumes • Machine and process cooling • Air purging during service work

Condition: used, Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus -filters -in the suitcase -with out battery Ledpfxsd Duvbs Adwerg -Dimensions: 420/165/H335 mm -Weight: 3.2 kg

Condition: used, High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW Lrodpfx Aedwlp Sjdwjg -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg

Condition: used, High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan Lrodpfjdwlp Usx Adwog -Motor power: 0.56 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 150 mm -Number: 2x fan available -Price: per piece -Dimensions: 380/380/H330 mm -Weight: 15 kg

Condition: used, Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s Ledpfjf Sxbujx Adworg -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 0.45 kW -Speed: 2800 rpm -Volume output: 22 m³/min -Pressure increase: kPA -Connection input: 140 mm Lrjdpecwn Egsfx Adwog -Connection output: 110 x 110 mm -Number: 1x fan available -Price: per piece -Dimensions: 300/290/H360 mm -Weight: 12 kg

Year of construction: 1988, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm Ledocmuwqjpfx Adwjrg -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 Lrodefmd R Uspfx Adwog -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Condition: used, High Pressure Centrifugal Fan, Pressure Blower, Ventilation Fan, Centrifugal Blower, Blower -Manufacturer: Bauknecht, ventilation fan -Type: P900 02 90S NF 1.1/2-5m -Power: 1.5kw -Speed: 2850 rpm -further data: not available -Dimensions: 360/355/H240 mm Lodpfx Aeg A I Eijdwerg -Weight: 29kg

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg Lredpfxodwlp Tj Adwog

Year of construction: 2006, condition: used, Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW Lsdpfx Ajd Scp Eedwerg -Dimensions 670/670/H445 mm -Weight 24 kg