Used Fan Blower Motor for sale (29,625)

Condition: repair required (used), Year of construction: 2013, operating hours: 50,000 h, functionality: limited functionality, overall weight: 19,200 kg, fuel type: electric, color: blue, V2002A VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 560kW, 560A, 690 VOLT VFD ACS 800,ABB electric motor RPM: 3806 Dıscharge pressure saturated :1825 mbar Mass flow vapour: approx. 26130 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3450mm Net weight with engine: approx. 6.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) Nedpfx Aoxwyaiefzjdd V2002B VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 630kW, 630A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2371 mbar Mass flow vapour: approx. 26710 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3615mm Net weight with engine: approx. 7.2 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002C VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 500kW, 500A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2900 mbar Mass flow vapour : approx. 27278 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1260 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3491mm Net weight with engine: approx. 5.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) Microcracks on casings and on impeller B. Air cooling of M3BP 355LKB2 IMB3/IM1003 ( 560 kW ) motor is improved with a higher capacity cooler. Old one is also available.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Ndedpownmn Rjfx Afzsd -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2900 RPM. Power supply 415V 3PH 50Hz Type: V870 50Hz Condition: used / used Nsdpsn Arbpjfx Afzodd Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) Ndsdpfx Afoxciw Iezjd - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Impeller diameter: 1200mm Impeller material: Ndedpfxewin Eao Afzjd Operating pressure: 2.94kPa -- (300 water mm) Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Height 2500 x width:2000 x length:3000mm Weight:4400kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Condition: used, New: Yes Empty weight: 5 kg Part suitable for: trucks Type number: 70392240 Volvo B12B, B9R, B11R, B13R Hydraulic Fan Motor 70392240 for Volvo B12B, B9R, B11R, B13R OEM : 70392240 Article nr.: F020011003N-veiling Hydraulic Fan Motor Volvo 70392240 Nedoxx Exgspfx Afzsdd

Condition: good (used), functionality: fully functional, machine/vehicle number: 3189233-1, power: 15 kW (20.39 HP), rotational speed (max.): 2,930 rpm, overall weight: 196 kg, total length: 1,200 mm, total width: 800 mm, total height: 800 mm, Used, overhauled ATB electric motor and side channel blower (vacuum pump / blower / vacuum compressor / pump / electric motor / foot motor). Nodstpd E Nopfx Afzsdd Data see type plate / pictures. Quantity: 1 Euro pallet with 1 vacuum pump. Packaging and loading included.

Condition: used, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet Nedpexn I Szjfx Afzodd safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 7500 m3/h INLET DIAMETER 250 mm OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg Warning! The machine is a return item, no original packaging, slightly bent base, slight scratches.

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Nsdpfx Afjn Arayozodd Maximum Speed: 2855 RPM. Power supply 415V 3PH 50Hz Type: V870 50Hz Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Njdper H Sqyjfx Afzedd Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Ndedpfxorgqm Ho Afzed Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.

Condition: ready for operation (used), functionality: fully functional, Offered here are several used centrifugal fans, including Siemens electric motors, available in various power ratings and sizes. The fans can be used for either intake or exhaust ventilation. They originate from a kiln system and are therefore heat-resistant. Currently, 5 fans are available for sale. 1x Alko Therm GmbH RZR 15-630 Siemens 1LA2186-4AA60-ZA11 22 kW / 1460 rpm 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60 11 kW / 1460 rpm 1x Alko Therm GmbH RZR 15-710 Siemens 1LA2207-4AA60-ZA11 30 kW / 1465 rpm 1x Alko Therm GmbH RZR 15-710 Siemens - 1x Alko Therm GmbH RZR 15-0630 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60Z 11 kW / 1460 rpm Ndsdpfexfzrijx Afzed Centrifugal fan, radial blower, radial ventilator

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3189233-2, power: 15 kW (20.39 HP), rotational speed (max.): 2,940 rpm, overall weight: 196 kg, total length: 1,200 mm, total width: 800 mm, total height: 800 mm, Used, overhauled ATB electric motor and side channel blower (vacuum pump / blower / vacuum compressor / pump / electric motor / foot motor). Data see type plate / pictures. Ndjdotp Tiujpfx Afzed Quantity: 1 Euro pallet with 1 vacuum pump. Packaging and loading included.

Condition: new, functionality: fully functional, Year of construction: 2025, A machine ideal both for professional and amateur joiners. The fan optimal output works perfectly with the machines such as: planing machines, surfacers, thicknessing machines, milling machines, scaleboarding machines and dimension saws. Machine characteristics MOTOR POWER 1,5kW REVOUTIONS 2850rpm SUCTION OFF EFFICIENCY 2530 m3/h SUCTION FERRULE DIAMETER 1x 130 mm /2 x 100 VOLTAGE / FREQUENCY 3/400V Information: Currently machines from new delivery don't have power button and sockets, which are visible in the photos. We are kindly asking to note it before purchase. Ndodpfovu Afgox Afzed

Condition: used, functionality: unexamined, machine/vehicle number: RHE E 180 MF, input voltage: 380 V, suction capacity: 1.692 m³/h, HVB Hansa Blower / Fan Manufacturer: Hansa Ventilatorenbau Model: RHE E 180 MF Ndedoxixqwjpfx Afzsd Capacity m3/h: 1,692 Power kW: 1.5 Voltage: 380 Volt.

Condition: used, Centrifugal fan NICOTRA - Gebhard Type P2M-M3M4J-RRB-ATEX RD/0 Fabric No. 318844/626052/1 Year of construction 2008 Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 500 mm Air outlet 450 x 450 mm Ndsdpfjpp D I Sjx Afzjd Motor speed 1435 rpm Motor power 4 kW Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Mounted adapter ring with flexible sleeve Ø 500 mm - Adapter flange for air outlet from rectangular flange 450 x 450 x to Ø 500 mm - Galvanized sheet metal housing Overall height without adapter ring 1100 mm Space requirement L x W x H 1100 x 1000 x 1630 mm Space requirement with pallet L x W x H 1400 x 1070 x 1800 mm Weight of centrifugal fan 200 kg Weight with pallet 230 kg Very good condition

Year of construction: 2023, condition: new, functionality: fully functional, extraction blower, wall-mounted fan high-performance fan, axial fan Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades air flow: 10000-24000m3/h nominal air flow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 Ndjdpfx Aow U T E Isfzjd sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273

Condition: new, functionality: fully functional, Year of construction: 2025, A machine ideal both for professional and amateur joiners. The fan optimal output perfectly cooperates with the machines such as: planing machines, surfacers, thicknessing machines, milling machines, scaleboarding machines, dimension saws. Machine characteristics MOTOR POWER 2,2kW REVOLUTIONS 2850obr/min SUCTION OFF EFFICIENCY 3900 m3/h Ndedpfx Ajvu Amkefzsd SUCTION FERRULE DIAMETER 3x 100 mm /1 x 150 VOLTAGE/FREQUENCY 3/400V

Condition: used, Centrifugal fan KASTRUP Ndsdpfx Afjdz Sqwszjd Fabric No. 27688/1 Year of construction approx. 1985 Volume flow approx. 4000 m3/h Intake pipe Ø 250 mm Exhaust air connection 400 x 120 mm Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition

Condition: new, Year of construction: 2025, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm Nodpfxevughls Afzodd ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Nedpfor H Sqvox Afzsdd Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm - Sturdy metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed

Condition: new, Year of construction: 2025, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm Ndsdpovugg Usfx Afzed MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Nsdpoxcitvefx Afzedd Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: new, Year of construction: 2025, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm ROTATIONS 2850 obr/min Ndodovuggbspfx Afzod DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Product characteristics: The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. Nodpfx Afovu Aprezodd The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL