Used Feed Apparatus for sale (14,338)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Nledpjxd Tknjfx Aansk Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Nodpfsu R Rtbjx Aanslk Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), 20 pcs/stock Nsdpfolgvpkjx Aanelk Durkopp Adler 367 Triple Feed Sewing Machine Technical specifications : - automatic thread cutting - automatic lifting of the leg - automatic reinforcement - economic engine EFKA 220v The cars are refurbished in very good condition It is suitable for all types of thick materials: upholstery, leather, synthetic, etc Warranty & Delivery Component: complete de livery car The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing th is machine, you have a 6-month warranty and a 5-year post-warranty. Delivery throughout the world!

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Nsdpfeif Ug Esx Aanolk

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Nlodpfx Aexlla Deansk

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Nlodpfx Aexivhajansk Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: new, Made in Italy Machine according to DIN 8606 Center height: 260 mm turning diameter over bed: 520 mm turning diameter over slide: 300 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 rpm) motor power: 5,5 kW (option: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Nsdpfx Aaedvm Euenelk Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide LxW: 650 x 230 mm cross slide stroke: 340 mm top slide LxW: 350 x 150 mm top slide stroke: 150 mm Tailstock spindle diameter: 85 mm tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement pneumatically supported - Acceptance certificate according to DIN 8605, lathe with increased accuracy - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version

Condition: excellent (used), Simodrive feed model Make Siemens Type 6 SC 6116 OAAOO G 600 D 490 / 49 M6 REQ Nsdpsfhkt Rjfx Aanslk Output current 60/120 A Space requirement :D. 290 x W.150 x H.480 mm Weight 13 kg

Condition: good (used), Year of construction: 2015, Chipper with horizontal feed , but vibrating chute is not included Njdpfx Aok Twl Toanolk working width 350 mm Motor rotor 30 kw

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Nljdpfx Aowb Hxvjanok Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 7, coil weight: 6,000 kg, coil outer diameter: 1,600 mm, coil inner diameter: 508 mm, conveyor belt thickness: 6 mm, number of feed rollers: 2, conveyor belt width: 600 mm, 6x600 mm Press Feed Line General Specifications Min. and max. sheet width: 120-600 mm, Min. and max. sheet thickness: 0.6-6.0 mm, Nljdpfx Aajrt U R Sonok 6-ton unwinder Components: Siemens, Hydac, Wattdrive, SKF, Sick, Festo. Price includes: feed line, die recognition system, safety fencing, transport to your location, installation and integration with the press, process commissioning, operator training, exceptional customer service, warranty and post-warranty service throughout Poland, first inspection after one year – free of charge, 24-month warranty on the entire line, attractive purchase terms, leasing financing available

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Nledpforkm R Hex Aanjk Working condition. Free for loading.

Condition: new, Made in Italy. Center height: 300 mm Turning diameter over bed: 600 mm turning diameter over slide: 380 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm motor power: 9,2 kW (special equipment / standard: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide stroke: 340 mm Top slide stroke: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Nodpfod Nk Ncex Aanelk Equipment: - 3-axis digital display - Automatic lubrication of the guideways - LED illumination - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick change holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price incl. 3-axis digital display.

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Jaespa, vertical band saw type AS 4 with hydraulic feed and saw band welding device -Cutting width: max. 385 mm -Cutting height: max. 265 mm -Engine power: 2.2 KW -Saw blade: length 3120 to 3320 mm Nlodpfx Aajwu N E Eonjk -Saw blade speed: continuously adjustable -Work table: with hydraulic feed, swiveling in 2 axes 15° / 45° -Band saw welding machine: Ideal BSO/16 -Dimensions: 1080/930/H2010 mm -Weight: 590 kg

Condition: used, Triangular belt sander Nlodpfx Aasulxhzenok

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Nledpew Ulirsfx Aanek

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Nsdoh Dimnepfx Aanjlk Diameter: 900 mm

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm Nedpfefwl Uaex Aanslk cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. Nledpjxnryiofx Aanok I am selling these at approximately 50 – 60% of the original price.

Condition: good (used), Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available Njdpfscgan Rox Aanolk -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Nledpfxsxk Tyio Aanek

Condition: good (used), Year of construction: 2008, functionality: fully functional, Homag Weeke Optimat BHX 500 20KW Center Machine in excellent condition Nledow A R Iqopfx Aanek Viewable in department 14 Dismantling, loading, and transport at buyer's expense

Year of construction: 2024, condition: new, - 6.000mm cutting length Nedspfcgaspfx Aanolk - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains Nljdpehtq Amefx Aanjk 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Year of construction: 2024, condition: new, - 10000 mm standard length - 800 mm standard rooler width - 2,2 KW gearbox roller conveyor - 0,75 KW gearbox infeed roller Nledpsbrq R Djfx Aanek