Used Fertilizer Spreader for sale (581)

Condition: used, Year of construction: 2018, approx. 5000 ha Spreading disks TS 30 / Lodstphckjpfx Ahtjhk

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Ljdpfjrxr R Sex Ahtehk

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Lsdpfx Aot Nf Dqehtehk

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Ljdpfxsuhp Eho Ahtehk

Condition: used, Year of construction: 2014, Equipment: compressed air brake, Spray nozzle up to compartment Nozzle holder axis rigid / Lhodpot A A Srofx Ahtjk

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Lhsdpfx Aotgqfdehtsk

Condition: used, Year of construction: 1990, Hydraul. Folding to the front Electric control panel Hydraulic lift / PTO shaft / Lsdpeuambdsfx Ahtjhk

Condition: used, Year of construction: 2024, ArgusTwin + WindControl Spreader Connect Hydro drive left and right with / AutoTS and FlowControl Profis Pro main screen left and right with AutoTS / Rolling and parking device s Tilt sensor EasyCheck mats, 16 pieces / Device control unit Ledpfx Ahjrxr U Dstshk

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Lhjdpfxjt Dx Uro Ahtok

Condition: used, Year of construction: 2003, for MB Unimog 3000 l capacity Isobus Without terminal 24 m working width / Lhodpfotrft Sex Ahtok

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new Lsdpfxezv Nwzo Ahtshk 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, functionality: fully functional, Equipment: double-sided, Amod CDL 1300, double-sided adhesive applicator Working width: 1300 mm Min./max. clearance: 0-90 mm Ledpfx Ahjzrlyketehk Diameter of application rollers: 170 mm Two feed speeds Year of manufacture: 1994

Condition: used, Year of construction: 2010, Used machine Lhodpfxjzk Nzvs Ahtok Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Availability: at short notice Location: Rhineland-Palatinate

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 Ledpfozu Syvsx Ahtshk ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 817-19241, Year of construction: 2019, load capacity: 45,000 kg, Unused Surplus ELME 817 Reach Stacker Container Spreader – 45,000 kg Unused surplus ELME telescopic top-lift container spreader, designed for handling laden ISO containers with a reach stacker. Technical details: Manufacturer: ELME Spreader AB, Sweden Type: 817-19241 Serial number: 21426 Year of manufacture: 2019 Lifting capacity: 45,000 kg Spreader weight: 9,300 kg Control voltage: 24 V Head configuration: Broad head Telescopic positions: 20 / 30 / 40 ft Ledpfjzuxwzjx Ahtshk 30-ft stop: Yes CE marked The spreader is unused

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The Mondini De/GS 200 type cheese spreader shown in the picture is for sale. The machine applies grated cheese like a "waterfall" onto the conveyor belt passing underneath. The application width can be adjusted up to approx. 15 cm widths. Infeed conveyor, and conveyor not included. Ljdpfxeuwrr Se Ahtohk

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Lhodoy Hl Nkjpfx Ahtjk

Condition: used, Year of construction: 1984, functionality: fully functional, working width: 1,400 mm, height adjustment type: mechanical, roll width: 700 mm, Equipment: double-sided, HÖFER Adhesive Application Machine Application width 70 cm / 140 cm Ljdpfx Aozvnanshtshk Suitable for panel materials and solid wood Simultaneous application of adhesive to the top and bottom surfaces READY FOR OPERATION

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. Lhodpfx Aovpp S Nohtjk If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 Ljdpfx Ahet N Ty Tjtehk SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: new, Year of construction: 2026, RPS-1500 Lhsdpfx Ast Ifxlohtok The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Lsdsx Uwp Ejpfx Ahtohk Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • In cab control panel with optional proportional disc speed control • Can be mounted on a trailer or customer truck chassis for versatile use Applications • Winter road de icing & anti icing spreading Lodpfex Uql Hjx Ahtshk • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: new, functionality: fully functional, color: orange, brakes: other, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: all wheel drive, fog lights, low noise, TICAB Sand & Salt Spreader RPS 6000 – Road De icing & Winter Maintenance Equipment The TICAB RPS 6000 Sand and Salt Spreader is a high capacity winter maintenance machine engineered for large scale snow and ice control, road de icing, and anti icing treatment on local, national, and international roads, highways, streets, parking lots, and airport surfaces. Developed for efficient, continuous spreading of sand and salt mixtures, this spreader delivers uniform coverage and high productivity during winter service. Key Features: • Large hopper capacity: 6 m³ for prolonged operation without frequent refilling • Hydraulic drive system with scraper chain feed for reliable material supply • Wide spreading width: 4–8 m — ideal for single to multi lane roads and highways Ledpfsx U Sv Tex Ahtjhk • In cab control: on/off and optional proportional disc speed control from the driver’s cabin • Optional autonomous engine for independent operation • Easy removal from truck chassis so vehicle can be reused after winter service Applications: • Winter road maintenance and anti icing operations • Spreading salt, sand, grit, and de icing agents • Highway, municipal street, airport, industrial yard, and parking lot treatment • Surface preparation and ice prevention for safer traffic Why Choose TICAB RPS 6000: The TICAB RPS 6000 combines high productivity, reliable hydraulic drive, large hopper capacity, and adjustable spreading performance, making it a top choice for contractors, municipalities, road service companies, and airport operations focused on efficient, high quality winter road maintenance. Contact us now for price, delivery options, configuration details, and full technical specifications.

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Lhedpjy Avqdsfx Ahtok Buyer responsible for dismantling and transport Professional dismantling recommended