Used Firewood Processor for sale (560)

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: Kfedpfx Aaexaa Sdsnoa - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: excellent (used), Riedel Riedel Industrial Chiller / Chiller – Type SC 101.2M4LE.l For sale is a professional Riedel chiller from the SC series, type SC 101.2M4LE.l. This unit was previously used in an industrial environment and is suitable for reliable process cooling—for example, for lasers, CNC machines, printing presses, plastics processing, or any application requiring consistently temperature-controlled cooling water. The unit has had only around 25 hours of operation and is therefore in excellent condition. This chiller is air-cooled and uses refrigerant R134a. Technical specifications: Model: Riedel SC 101.2M4LE.l Cooling capacity: approx. 10–11 kW Cooling medium: Water / Water-glycol mixture Refrigerant: R134a Operating voltage: 400V / 3~ / 50 Hz Integrated circulation pump and stainless steel tank Air-cooled with large axial fan (top-mounted) Microprocessor control with temperature display Pressure gauge on the front Kodoxyxtyepfx Aanefa Compact, service-friendly design Dimensions: 540 mm (width) × 1048 mm (height) × 700 mm (depth) Weight: 159.5 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm Kfodpfx Aslu D Tfsanja 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 15,000 h, For sale: Used Mounty 4000 cable crane ("mountain harvester") for uphill and downhill cable yarding, manufactured by Konrad Forsttechnik GmbH for forestry operations. Year of manufacture: 2017 Equipped with Woody 61 processor head (incl. top saw) Carriage: Liftliner LL-40-01 Carrier vehicle: Mercedes Can be viewed in operation at any time. Special features: Kfodpfxsx A A Srj Aanea Ideal for steep slopes and challenging terrain! Very robust construction for full forestry harvesting applications. Regularly serviced – immediately ready for use! Condition: Technically and visually well-maintained. Ready for operation with no maintenance backlog.

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h Kedpsw Aw Nnsfx Aansfa - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Kfsdpfew Nadyex Aanja Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2017, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: D200z, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new D200Z with Large Tool Changer & Erowa Compact 80 For sale is a very well-maintained D200Z with very low operating hours, a large 40-position tool changer, and an Erowa Compact 80 with ITS 100 interface preparation. Equipped with AFT oil mist extraction. The machine is currently powered up and can be inspected at any time. Immediate commissioning possible. ✅ Technical Details & Features Machine: D200Z – High-precision machining center Condition: As-new, meticulously maintained Operating hours: Very low Tool changer: Large 40-position changer for efficient machining Additional equipment: Erowa Compact 80 with ITS 100 preparation ✅ Optional Extensive Accessories Available Premium tool holders from BIG KAISER and WNT Vices for ITS 100 Erowa from SCHUNK Shrink-fit tool holders from KEMMLER Vero Visi CAD/CAM system with 5-axis module incl. postprocessor ✅ Your Advantages Ready for immediate use – machine is powered up Very well-maintained, minimal use → virtually as-new Flexible expansion due to extensive accessories Ideal for precision parts, tool and mold making 📌 Price on request – inspection by appointment only. Kfsdexbdfkopfx Aansa

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Kfedpjhkz Hijfx Aanea Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: good (used), Year of construction: 2019, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control system, converter, controller, servo module, stepper motor driver, path guide controller, steering controller -Manufacturer: WKC, Web guidance controller, 3 control loops -Type: D-MAXE 3 -Number: 3 controllers available Kodpfxexxrbze Aanjfa -Price: per piece -Dimensions: 190/90/H95 mm -Weight: 1.2 kg/pc.

Condition: like new (used), Vacuum machine Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Kfedpsxru Tgefx Aanoa Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Kedpfsxgn Efex Aanefa Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" including 3 storage shelves in a good condition. Object of sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X 2x DS4246 Shelf - 24 hard disk bays 3,5" - 20x 4TB NL-SAS hard disks, hot swap Kjdpsiindlsfx Aanefa - 4x 400GB SSD hard disks, hot swap - Mounting rails for 19" cabinet - 2x IOM6 6GBit SAS module (redundant, hot swap) 1x DS2246 shelf - 24 hard disk bays 2,5" - 24x 1.2TB at 10k SAS hard disks, hot swap - 2x power supply, redundant - 2x IOM6 6GBit SAS Module (Redundant, Hot-swap) Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Kedpfx Aexwz H Rjanofa Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: new, Year of construction: 2025, In 1-man operation you can process up to 1 ster of wood and 4-6 ster per hour within a few minutes. Safe and effective cutting due to the 25,33,50,66,75,100cm cutting length in front of adjusted guide rails. The roller guide at the tip of the chainsaw ensures that the firewood is cut to the desired length. incl. guide bar and 1 chain. Kodofnvxgspfx Aanefa

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Kfedpfox Dzftox Aanoa Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.

Condition: good (used), Leco LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 Carbon Determiner is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption. The infrared (IR) source consists of a nichrome wire heated by resistance up to 8,500 °C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. For description purposes, carbon dioxide can be used; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas passes through the cell, thereby preventing it from reaching the IR detector. One IR cell is used both as a reference and for measurement. The total carbon content in the form of carbon dioxide is captured continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell to remove any remaining atmospheric gases. Technical Data: Required Gases: Carrier gas: Oxygen, 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free Kjdjxxaxuopfx Aanofa Gas flow (based on nominal analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Oxygen: 501-291 O₂ pressure regulator Compressed air: 766-036 air pressure regulator Inert gas: 764-216 inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data Transfer: Included Data Storage: Without PC: 10 sample weights, 50 results, 5 methods Without PC: Internal memory / Optional external display Without PC: LCD display (16 x 26 characters) Power Requirements: Determinator: 230 V~, ± 10%, 50/60 Hz, single phase, 15 amp max Operating current: 12 A Standby current: 4 A Condition: Used Scope of delivery: (See image) (Subject to change and errors in technical data; specifications subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: good (used), Timber saw machine with powered roller conveyor for firewood production. Roller conveyor and saw blade are electrically/hydraulically driven. Saw blade length is approx. 100 cm. Roller conveyor length is approx. 580 cm. Mounted on wheels on one side and can be easily moved with a forklift. Kjdpjx Ea Hljfx Aanofa

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" in a good condition. Item for sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC Kodpfjiinawex Aansfa - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X Condition: This is a used unit and may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and Shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: excellent (used), IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processor heads Independent power control via fieldbus interface Advanced IPG power supply with integrated safety Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz Kodpfetr Ep Njx Aanefa 59A 63A/80kA YEAR: 2011 S/N: 11101050 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer you an untested ProJet 3D Printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more. With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Print Modes HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD Mode 298 x 185 x 203 mm UHD Mode 127 x 178 x 152 mm XHD Mode n/a Resolution: HD mode 375 x 375 x 790 DPI (xyz); 32μ layer thickness. UHD mode 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode n/a Accuracy (typical) 0.1 - 0.2 % of part dimension Accuracy depends on build parameters, part geometry, part placement and post-processor settings Kfedpfog I Iv Rox Aansa Email Notification: No Build Materials: VisiJet® EX200 build material Solid material with high durability. VisiJet® SR200 Construction Material Inexpensive multi-purpose material. Available in natural, blue or grey. VisiJet® HR200 construction material Available in blue, specially developed for investment casting applications. Backing material: VisiJet® S100 support material: non-toxic wax material for melting supports without hand application. Power supply: 100-127 VAC, 50/60 Hz, single phase, 15A Dimensions (LxWxH) printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) Ksdpfx Aajk H Akgsnsfa (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data Ksdpfxsvx Sxdo Aanjfa RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Coherent Type: 205 F Laser beam source from Coherent COMPex Pro Compact, easy-to-integrate excimer laser. COMPex excimer lasers are highly effective light sources, with a compact design and easy installation and operation. They deliver excellent results in demanding applications, such as solid sampling systems (LA-ICPMS), materials research (PLD) and precise material processing. With ceramic pre-ionization, the COMPex offers output power of several hundred millijoules plus unmatched pulse-to-pulse stability. The COMPex also comes with an improved gas processor that extends the lifetime of both the gas and the optics. Applications • PLD – Pulsed Laser Deposition • Thin wafer processing • Laser lift-off/debonding • LA-ICP-MS Pulse energy1 (mJ) Wavelength 400 Max. repetition rate 50 Hz Electrical: Kfjdpfxevx Sz Ee Aanja 230 V AC, 16 A, 50/60 Hz switchable, 1-phase Dimensions L x W x H 1658 x 375 x 813 mm³ Weight: 325 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Kfsdpev Tywqofx Aansa Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a plasma - discharge layering system. Plasma - discharge layering system solut Ksdjdz Achepfx Aansfa Plasma plant for the decoating of DLC Vacuumrecipient 200 x 200 x 200 mm Microprocessor control for gas mixtures PC engine (industrial PC) and printer for process documentation Vacuum pump, Alcatel model ACP 28 Type: As 200 DLC Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax