Used Firing Furnace for sale (2,093)

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW Fpodpfx Aajclupdjbjn PLC : Siemens S7

Condition: good (used), Year of construction: 2000, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF ProE-2442-CTS-10-R 2400 x 4200 mm, Right – Left Year: 2000. With convection (Low-E glass) Fsdpfxsxaugce Aabopn Noise reduction cabin included. 400 V, 50 Hz, total power: 1210 kW (heating 630 kW, motors 580 kW) In good technical condition. Inspection is possible by appointment.

Condition: ready for operation (used), A small tunnel oven for pizza production is available. Heating capacity: 10kW, temperature range: 120°C-300°C, conveyor time: 90s-20min, conveyor belt dimensions X/Y: 460mm/1320mm, baking area X/Y: 460mm/610mm, production capacity for 26cm pizzas: approx. 70 pieces/h, machine dimensions X/Y/Z: approx. 1450mm/1000mm/450mm, weight: approx. 170kg. An on-site inspection is possible. Fpodpfx Aaoxapgqjbsn

Year of construction: 1988, condition: used, functionality: unexamined, machine/vehicle number: 26535, Heating: gas Fpodpfevkwifox Aabsn Fuel gas: propane Gas overpressure: 80-100 mbar Working temperature: 150-750 °C Heating output: 550 °C (300 kg/h steel) Max. permissible load weight: 350 kg gross Type of loading: automatic with loading device Type of unloading: manually via loading device Max. batch dimensions: 610x910x460 mm

Condition: good (used), TAV Dual Jet TH1000 Horizontal Front Loading High Vacuum Furnace With Gas Quenching By Dual Flow Fsdpexc Hl Nsfx Aabspn Chamber Dimension W1,000 x D1,000 x H800mm. Maximum Load 750kg. Maximum Temperature 1,300° C. Vacuum 600° C to 1,200° C, Tolerance ±6°C. Ultimate Vacuum (Conditioned Furnace) 1.0 x 10-5 mbar, Operating Vacuum 5.0 x 10-5 mbar, Partial Pressure Nitrogen/Argon 0.1 To 10 mbar, Leak Rate mbar/sec 5 x 10-2 mbar l / sec, Microns 4 microns / Hour. Rating of Heating 250kW, Connected Load 290 Kva, Rated Voltage (3 Phase at 50Hz) 380V. S/No. 087/1994. NOTE: None of the external chiller kit is included with this sale. See Lot Description for Important Information on Final Bids and Equipment Collection. With PLC, Digital Eurotherm Temperature Control/Recorder, Vemer Digital Controls, Mechanical Pump, Vacuum Pump, Diffusion Pump, Booster Pump, Holding Pump, ICS Cooler, Amazon Filter Unit, AJ Metal 1,000L Air Vessel & Front Pneumatic Loading Door. Footprint W6,000 x D7,000 x H5,000mm. BIDDING NOTE: None of the external chiller kit is included with this sale. All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Condition: used, Year of construction: 2007, 2 (two) chambers Max. size: 2580 X 4200mm Min. size: 100 X 200 mm Thicknes: 4-19mm LowE Fedpeiqn Aisfx Aabjpn The line is currently dismantled and stored in our warehouse as shown on the pictures.

Condition: ready for operation (used), consisting mainly of: - 2 pieces of second-hand multi-purpose chamber furnaces, make: IVA, type: MKG 2s, 70/95/110, year of manufacture 2007, gas heated - 1 piece of second-hand tempering furnace, type: KEL 70/95/100-500°C, electrically heated - 1 piece of second-hand protective gas tempering furnace, type: RH 70/95/110 gs, gas-heated - 1 piece of second-hand flood spray system, type: DFS 1100 - 1 piece of second-hand charging trolley, electric motor driven Fpodpsug T Hgjfx Aabjn - 1 piece of second-hand lifting table - 1 piece of second-hand process control system PROSYS/2 with full automation - 1 piece second-hand charging magazine - incl. available spare parts

Condition: new, Year of construction: 2024, Firing chamber output: 34 kW Working power: 29 kW Fpodpepkwhqofx Aaben New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: used, Year of construction: 2007, operating hours: 6,383 h, functionality: fully functional, machine/vehicle number: 172, ATV Technologie GmbH Tabletop Quartz Tube Furnace, PEO 601 Model: PEO601 Condition: Used Technical Data: 230/400V AC 50Hz 16A 6.3kW 20-1000°C General Information: Year of manufacture: 2007 Serial number: 172 Operating hours: 6,383 Fjdpfxjw Dbrve Aabopn Compact tabletop unit for Plasma Electrolytic Oxidation (PEO) or Micro Arc Oxidation (MAO) Equipment for firing or annealing electronic components Designed for surface treatment processes of aluminum, magnesium, and titanium Produces ceramic coatings on metal surfaces that are particularly hard, corrosion-resistant, and temperature-resistant Programmable firing furnace with precise temperature control Maximum temperature range: up to approx. 1,000°C Heating rate: approx. 100°C/min Processing chamber: diameter approx. 112 mm (4½″), suitable for wafers up to 100 mm Application in semiconductor, micro, and nanosystem technology Ideal for research, development, and small series production Microprocessor-based control with adjustable parameters (e.g., voltage, current, time) Integrated control panel with digital displays RS-232 interface for process data monitoring and control Optional connection for process gases (e.g., N₂, H₂) Accessories: Scope of delivery as shown in the photos

Year of construction: 1986, condition: used, functionality: unexamined, machine/vehicle number: 43563, Heating: Gas Fuel gas: Propane Gas overpressure: 10-50 mbar Fpsdpfx Aevkwqvsabjn Working temperature: 150-450 °C

Condition: used, TECHNICAL DETAILS Fpodpfx Aoug U Thjabon Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V]

Year of construction: 1988, condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg Fodpfx Aaevrivaobjpn

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Fjdpfx Ajqgfbgjabepn

Condition: new, Year of construction: 2024, Firing chamber output: 49 kW Working power: 45 kW New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W Fpsdsk Utrdepfx Aaben designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Oven length without flue gas fan: 1150 Weight: 305 kg

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Fpedpowmfyvsfx Aabjn Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: used, • Type: HTF – 2448 – ABTS – 10 – L • Year of manufacture: 2000 • The tempering line (glass tempering furnace) consists of the following main components: • Loading table • Roller hearth furnace • Cooling section (blower box) • Unloading table • Blower system with ducting to the cooling section • Control cabinets, wiring, and control system • Pneumatic system • Glass thickness range: 2.85 – 19 mm • Usable loading area – 4.7 mm, size 2440 x 4800 mm; 3.0 mm, size 2440 x 4200 mm • Maximum glass size: - 4.7 mm, size 2440 x 4800 mm (5100 mm) - 3.8 mm, size 2440 x 3000 mm - 3.0 mm, size 1200 x 2500 mm Fsdpfjw Ac E Iex Aabepn • Minimum glass size: 100 x 250 mm • Total height: approx. 3.1 m • Working height: 880 mm • Total width: approx. 5.3 m plus approx. 7 x 9 m for blower room • Furnace roller diameter: 95.25 mm • Furnace roller pitch: 120 mm • Software updates in 2011 • Price on request

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Fpjdsw Ec Egepfx Aabjn Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Year of construction: 1990, condition: used, degree max 1800 Fpodpfxsrgbyvo Aabon total power requirement 5 kW

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Fsdpfx Ajifpuaoabepn

Condition: new, Year of construction: 2024, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Fpsdpfx Aaepn Nyzobsn Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V Fjdpfx Aasthr Ncobjpn output 3 kw range - high tensile Innen 295x230x125 mm

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Fjdeq Ttz Espfx Aabepn

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Fodpfxjpcgzgj Aabepn

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Fsdpfx Aevxvgroabepn

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Fsdpfx Ajwkiipoabepn