Used Firing Furnace for sale (1,928)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: Bwjdpfxozu Nvzs Alfsw - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1972, * Former Berlin Fire Department truck. * MAN 450 HD-L. Built in 1972. Registration card available. Bwsdpfjwlqzcjx Alfew * Engine - Frost damage. Spare engine available.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation If you have any questions or require further information, please feel free to send us a message or call us. Bwsdpez Ehi Eefx Alfsw

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side Bodpjxd Unbsfx Alfsww • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: excellent (used), Year of construction: 1980, Hot chamber furnace Chamber: 65 x 39 x 22 cm Power: 15.3 kW Bjdpfxsy E Izyj Alfsww Max temperature: 1000°C Operating mode: electric

Condition: used, mileage: 2,75,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step Bjdo Afrrwjpfx Alfjww * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: ready for operation (used), functionality: fully functional, power: 220.65 kW (300.00 HP), first registration: 05/2003, axle configuration: 4x2, color: red, Year of construction: 2003, Aerial Rescue Vehicle Rescue Platform / Work Platform Vema Lift Oy ​ Type: 323TFL-E Maximum Working Height: 32 meters Horizontal Outreach: approx. 21 meters Rotation Angle: 360° continuous ​ Maximum Basket Load: 400 kg Water Line to Basket Water Monitor in Basket Power Connection in Basket ​ Stabilizers: hydraulically operated, fully automatic Control: platform and ground controls (electrohydraulic) Special Features: Compliance certificate according to Machinery Directive 98/37/EEC, including EMC directive. Chassis Manufacturer: Scania Model: P94GB 4x2 NB Drivetrain: 4x2​ Transmission: Manual First Registration: 20/05/2003 Engine Power: 300 hp Additional Equipment Firefighting body with equipment compartment Hose reel and bracket Bjdswn Hwrspfx Alfoww Work lighting Surrounding area illumination Storage boxes for equipment Special Signal System Blue lights Sirene system (Martinshorn or equivalent) Condition & Service The vehicle has been stored exclusively in the fire department’s station and has undergone regular maintenance. Service and safety inspection were performed in April 2025. Complete vehicle and technical documentation is available. Additional Information The vehicle features additional firefighting-specific equipment and special functions. A detailed list of all equipment, technical specifications, and further documentation is available upon request. All information provided to the best of our knowledge and belief; no guarantee of completeness or accuracy. This advertisement does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Year of construction: 2024, condition: used, CoolTemper PowerJet TCF-GTH-96.144-PJ4 Convection Flat Glass Tempering Furnace Serial no: H358 (2024) Maximum temperature: 750 degree / Operating temperature 700 degree, Min Glass Size 120 x 320mm, Max Glass Size (4-5mm) 1650 x 2400mm, (6mm) 2150 x 3650mm, (8-19mm) 2440 x 3650mm with Roller Loading/Unloading Tables, Cooltemper GlassScan heat map scanner, Overhead Platform/Fan Room, Cooltemper SMART IMMI Control Bsdpfs Afwrbex Alfeww Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: used, Hardening furnace, muffle furnace NABER type 31S Machine no. 10604, year of manufacture 1973 Temperature range: approx. 1150°C Internal dimensions (W x D x H): 1000 x 700 x 380 mm Heating power: 42 kW Bsde Agpf Nopfx Alfjww Connection voltage: 400 volts, 50 Hz - Simple temperature control - Control unit mounted on the furnace - One heating element is damaged Space requirement: Width 170 cm x Depth 200 cm x Height 200 cm Weight: 1550 kg Good condition

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. Bwsdpfowykz Ssx Alfsw We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has been used very little. Bjdpfoz H I N Iox Alfoww Maximum temperature: 1,320°C Power: 30 kW Thermocouple: Type S with a 0.35mm diameter in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, mileage: 32,790 km, power: 92 kW (125.09 HP), first registration: 03/1958, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 3,630 kg, overall weight: 9,300 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, Year of construction: 1958, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: en route / in transit Bwedoz D Un Eopfx Alfsw Klöckner H-Deutz ELF/TLF 16/25 A3500/6 Year of manufacture: 1958 All information is provided without guarantee, as the vehicle is currently en route! Sales to commercial businesses or for export are subject to an additional 19% VAT. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Bwedpfx Alezh Uyrsfsw Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Condition: used, mileage: 22,000 km, power: 90 kW (122.37 HP), first registration: 11/1997, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2028, color: red, gearing type: mechanical, emission class: euro1, number of seats: 2, total length: 6,735 mm, total width: 1,933 mm, total height: 2,870 mm, Year of construction: 1997, Equipment: ABS, parking heater, Very good Sprinter from the Ministry of the Interior, subsequently stationed at the local fire department. Only 21,900 total kilometers driven. New TÜV inspection (German vehicle inspection), passed directly without any defects, valid until September 2028. The inspector was impressed with the outstanding condition of the vehicle; no rust could be detected. MAXI panel van L3H2 WITHOUT sliding door. The vehicle has been used up to the present day solely as a radio command vehicle / operations management vehicle (ELW) / radio patrol car by the civil protection agency and then by the fire department. The 312 D was therefore a mobile command center and means of communication, primarily used at major events. The Sprinter was always kept in a heated hall, it was rarely, but regularly, moved, and it was also regularly serviced (last service 1,000 km ago). Previously registered as "Other motor vehicle, fire department vehicle, radio command vehicle". Registered unladen weight: 2890 kg. Permissible gross vehicle weight (original): 3500 kg. Can be driven immediately with a German car driving license. Overall length 6735 mm, width 1933 mm, height with radio equipment/antennas 2870 mm. Tire size 225/70R15C. Hankook winter tires with snowflake symbol, DOT 2024. Like new condition. Engine OM 602 five-cylinder diesel with turbocharger, 2874 ccm and 122 hp. 5-speed manual transmission. Driver's airbag. Bwjdpez D N Awofx Alfew ABS and ABD (anti-lock braking system and automatic differential lock). Auxiliary heater from EBERSPÄCHER. Power steering. Ball-type trailer hitch ORIS with 2000 kg braked trailer load and 750 kg unbraked trailer load. In addition, there are sturdy running boards on both sides for easier access to the operations management/radio area. 2 seats are registered in the vehicle documents for driving. The seats on the transverse benches at the rear of the radio compartment are only permitted for stationary use. Since there are 2 small radio workstations installed on the partition wall behind the driver and passenger seats, the front seats have the popular "swivel function." If the vehicle were to be converted into a motorhome and the partition wall removed, the swiveling seats in the cab would already be present in their original configuration. The partition wall also has a pass-through to the crew compartment. Above this, a large fuse box is mounted for the superstructure technology. A lockable maintenance hatch on the left side allows the vehicle to be connected to shore power; a telephone connection is also installed here. The original 230-volt power cord is included. Equipped with a special signal system and pneumatically extendable antenna mast. The conversion into a radio patrol car was carried out in outstanding 1990s quality by the company BINZ. This is an excellent Sprinter from the first series with durable, robust technology, plenty of space, and already installed high-quality furniture and technology in the interior. This MAXI Sprinter can be driven directly with a car driving license and still has a decent payload in its current configuration. We installed 5 new glow plugs in 09/2026. Otherwise, apart from the new main inspection, nothing had to be done on this great vehicle. The 312 D-KA is immediately available and is waiting for new tasks. This offer applies only to commercial businesses and freelancers of all kinds and industries, as well as to authorities / emergency services of any nature. Direct sale to private e

Condition: excellent (used), mileage: 34,200 km, power: 251 kW (341.26 HP), overall weight: 18,000 kg, axle configuration: 4x4, gearing type: automatic, Year of construction: 1994, Equipment: all wheel drive, Iveco 190E34W fire department 4x4 Gear reduction selectable, rear and central lock Water tender with 2,680 liter water tank Pump with 3,300 l / min at 8 bar, high pressure 300 l/min Various equipment as per photos, emergency power unit Bsdpfx Alsq Dqfvjfsww Quick attack left and right Vehicle dimensions: Length: 8,000 mm Width: 2'500 mm Height: 3'450 mm

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Bjdpfe Aba Rgsx Alfjww Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Wiesheu furnace for sale. 8+4 tray design, with 2 loading trolleys, own extractor hood. Continuously serviced by brand service. Bwedpfxouxfmls Alfsw

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 Bjdpfxez Azauj Alfsww • Rated temperature: 750 °C • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth) Can be inspected while energized.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Bodpfxozqclhe Alfjww

Condition: used, mileage: 52,791 km, power: 184 kW (250.17 HP), first registration: 01/1964, fuel type: diesel, empty load weight: 23,470 kg, maximum load weight: 1,530 kg, overall weight: 25,000 kg, tire size: 11.00R20, axle configuration: 6x6, wheelbase: 3,775 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 8,200 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 1964, Equipment: all wheel drive, cable winch, Vehicle location: Bovenden, double bench seat, rear window, 6-speed manual transmission, rotating beacon, winch. Bjdpfx Aovhg R Hjlfjww Wheelbase: 3,775 mm. Body: crane truck type F Uranus 7, crane capacity: 16,000 kg, 360° rotation. The Magirus-Deutz Uranus was a truck model manufactured by the German commercial vehicle producer Magirus-Deutz in Ulm. With 250 HP from an air-cooled V12 engine made by Klöckner-Humboldt-Deutz, the Uranus was the most powerful truck produced in Germany at the time. This heavy, three-axle vehicle was introduced in 1954 as the A12000 Uranus and served as a chassis for fire brigade and military crane trucks as well as heavy-duty tractors. Other versions included articulated tractors and dump trucks, mainly for export. This particular vehicle is a beautifully preserved collector’s item with an interior that is in outstanding original condition, which can of course be attributed to its very low mileage. Included with the vehicle are the original spare parts list, original description, and operating manual. The vehicle underwent restoration at a cost of approximately €150,000! Purchase price before restoration: €80,000! Length: 8,200 mm, width: 2,500 mm, height: 3,300 mm. Complete documentation/history available. The vehicle comes from the Ulm Fire Department. Fitted with 10 new Michelin tires, DREAM CONDITION! ACCESSORY INFORMATION WITHOUT GUARANTEE. Specifications subject to change, prior sale and errors excepted.

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. The equipment shown in the photos belongs to the vehicle and will be included. Bodey S Thfjpfx Alfjww Water tank: 1230 liters Foam tank: 130 liters

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total length: 23,700 mm, type of input current: AC, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / Glaston, ProConvection-2448-CTS-20-R 3,8 – 19 mm, 2400 x 4800 mm, Right – Left. Year: 2005. Bwodpfx Alj Agwh Iefjw With convection (Low-E glass). Noise reduction cabin included. 400 V, 50 Hz, total power: 1747 kW (heating 1100 kW, motors 647 kW) In good technical condition. Inspection during production is possible by appointment. Available: DECEMBER 2026

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Bedpfxoz Ru Iyj Alfsww Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, mileage: 14,700 km, power: 125 kW (169.95 HP), first registration: 06/1970, fuel type: diesel, empty load weight: 7,100 kg, maximum load weight: 4,400 kg, overall weight: 11,500 kg, tire size: 8.25-20 PR 14, axle configuration: 4x4, wheelbase: 3,750 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 9, Year of construction: 1970, front tire size: 8.25-20 PR 14, rear tire size: 8.25-20 PR 14, Equipment: all wheel drive, Vehicle location: Bovenden Wheelbase: 3,750 mm Body: 1,600 L water tank, Klöckner H-Deutz LF 16 F Magirus 170 D 11FA Year of manufacture: 1970 Pump capacity: 1,600 L/min Tank capacity: L Bwsdpfx Aloxxmqqsfsw Crew: 9 personnel including driver Brake type: Air/hydraulic, engine brake The vehicle was in use as a company/plant fire engine from 1997 to 2025. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 29,000 km, power: 103 kW (140.04 HP), first registration: 10/2001, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro3, number of seats: 6, total length: 6,000 mm, total width: 2,300 mm, total height: 2,880 mm, loading space length: 2,900 mm, loading space width: 2,300 mm, loading space height: 1,740 mm, Year of construction: 2001, Equipment: ABS, First owner. German volunteer fire department, directly from active service. Valid TÜV (technical inspection) until 11/2027 (new at 28,955 km). Last service at a MAN service partner with proof of service at 27,992 km. Modern ZIEGLER Alpas aluminum superstructure from 2001. 750 L fire water tank. Quick-attack system. Fireco light mast, pneumatically operated with LED spotlights, mounted between the superstructure and the cab. Analog radio installed / digital radio prepared. Ball-head tow hitch prepared, connections for 12 and 24 V. Towing capacity 3500 kg braked. Wheelbase 3300 mm. Four-cylinder MAN truck diesel engine with 4580 ccm and 140 hp. Euro 3 emission standard. 5-speed manual transmission. Leaf spring suspension. Maximum speed 85 km/h. Overall vehicle dimensions: Length 6.00 m / Width 2.30 m / Height 2.88 m. Unladen weight: 4550 kg. Permissible total weight: 7490 kg. Tires 215/75R 17.5 (rear tires from 2015 and front tires from 2022). Crew cab / 6 seats in total. ABS. Radio. 100 liter diesel tank with tank lock. Vehicle equipped with special warning system and DIN mounting according to 14530-17 for TSF-W (standard fire engine), without loose equipment. The MAN was driven to us without any problems in September 2026, covering a distance of over 600 kilometers on the highway. It runs very well. This fire engine is immediately ready for use, has typical signs of wear, and is in good condition. Ideal vehicle for the training of firefighters and also for the youth fire brigade, as it is a very compact fire engine with low loading heights. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services of all kinds. Sale to private end-users is unfortunately not possible. Subject to prior sale and errors. Bwsdpozx Ifpofx Alfjw Purchase price according to §25a UStG (German VAT Act) differential taxation (gross = net, there is no separately stated VAT and it will not be added).