Used Fkd 60 for sale (20,748)

Condition: excellent (used), CTS Lhjdpjvb Hanjfx Abcod Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Lhjdpfxjvb E Uqs Abcod Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Lhsdpox Anipjfx Abcod Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: used, machine/vehicle number: 13260, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor knives: 5 Ledpfsyr Txcox Abcshd Stator knives: 2 rows Infeed opening approx. 720 x 980 mm Drive motor: 75 kW Wet mill

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Lsdpfx Ajyr Tv Uobcehd Stator knives: 3 Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: used, machine/vehicle number: 12866, Rotor diameter: 450 mm Lhsdpeyr Tvuefx Abcsd Rotor width: 600 mm Rotor blades: 4 Stator blades: 2 Inlet cross-section approx. 450 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor blade rows: 7 Lsdpoyr Tu Dofx Abcehd Stator blade rows: 2 Inlet cross-section approx. 720 x 980 mm Drive motor: 90 kW

Condition: used, machine/vehicle number: 13064, Rotor diameter: 450 mm Rotor width: 600 mm Number of rotor knife rows: 5 Number of stator knife rows: 2 Feed opening approx. 600×600 mm Lodpfx Aoyr Tt Tebcjhd Drive motor: 55 kW

Condition: used, machine/vehicle number: 13009, Rotor diameter: 600 mm Lsdpfxoyr Ttgj Abcjhd Rotor width: 1200 mm Rotor knives: 3×4 Stator knives: 2 Feed opening approx. 1200 x 600 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows of stator knives Lhedpeyr Tp Ujfx Abcjd Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12598, Rotor diameter: 600 mm Rotor width: 1450 mm 7-knife rotor 3 rows of stator knives Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW Lhedpfxeyr Tpzj Abcod

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Lhedeyr Tpnspfx Abcsd

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm Ljdpfjyr Tl Aex Abcehd 6-knife rotor – cross-shear cutting rotor 2 rows of stator knives Infeed opening approx. 650 x 100 mm Drive motor 75 kW Machine features: The cross-shear cutting rotor ensures optimal material intake and distribution, resulting in high throughput with reduced energy consumption. Electro-hydraulic opening of the mill housing and screen basket. The screen insert can be rotated 180° and reused after one-sided wear. Rotor knives can be adjusted outside the mill using a setting device, reducing downtime.

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Lhsdjhqt Hpjpfx Abcjd Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 6,000 kg, Equipment: documentation/manual, Sideros Syncrolift column lifting and rotating device, 6000 kg load capacity, as new condition Min. height: 450 mm Max. height: 1950 mm Travel: 1500 mm Clamping plate diameter: 800 mm Total height: 2505 mm Total weight: 1300 kg Lhodeyrz Hnjpfx Abcod Torque: 5500 N/m Speed: 0.75 rpm.

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Lhodpfjyr I H Uex Abcod Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Ledpfxox D Ra He Abcjhd Application Types CNC Wood Machining

Condition: good (used), Year of construction: 2003, Ref:11074 . 2003 Muller Martini Diamant 60 Casing-in Line RHE 621 Casing-in line with ‘AMRYS’ Pre-setting System. Equipped with: AMRYS computer system for automatic make-ready with touch screen display AS 620 Spine warm up section for hot-melt bound books for better rounding RA 640 Rounding & backing station GK 650 with 1st gluing & lining, 2nd gluing with paper lining, head & tail banding EH 660 Casing-in station with automatic case feeding & joint gluing Lhedpfxoyvq S Nj Abcod EP 680R rotary joint forming and pressing unit with continuously variable temperature and pressing pressure during joint forming. Manuals, accessories and tools. Specification: Max speed: 60 cycles/min Max format: 300 x 390 x 80 mm Min format: 80 x 100 x 5 mm

Condition: used, mileage: 75,850 km, power: 85 kW (115.57 HP), first registration: 08/2022, fuel type: electric, overall weight: 3,200 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), No. 62 – You’ll find this and many other inspected Mercedes-Benz vans on our website: ---- Fully electric Mercedes-Benz eVito 112 CDI long version, one owner, in good overall condition. Electric motor 85 kW / battery 60 kWh (usable), range approx. 240 km. All maintenance and repair work has always been carried out directly by Mercedes-Benz. Charging cable included. ----All maintenance and repair work was always performed directly by Mercedes-Benz, at 14, 35, 70 km.---- Permissible gross weight: 3,200 kg Unladen weight: 2,342 kg Payload: 858 kg Wheelbase: 3,200 mm VIN: W1V44760314112706 Warranty with surcharge 2 keys ----* One owner, full service history, new TÜV inspection * Electric motor 85 kW * High-voltage battery 60 kWh * Speed limiter system 120 km/h * Charging cable Mode 3 (Type 2, 3x20A) 4m * Air conditioning * Pre-conditioning * Active brake assist * Reversing camera * Parktronic system (PTS) * Heated seats Lsdpfxeyi Rrbj Abcehd * Hands-free system * Driver and passenger airbags * LED cargo area lighting * Heat-insulating glazing * Light and rain sensor * Two-way speakers in front * Steering wheel adjustable in height and tilt * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Crosswind Assist * Service interval display ASSYST * Audio system Audio 30 (DAB, Bluetooth) * Electric windows * Central locking * and much more ----Subject to errors, changes and prior sale Special equipment: Audio system Audio 30 (DAB, Bluetooth), plastic flooring in load/passenger compartment, DAB tuner (digital radio reception), automatic headlight activation, speed limiter system 120 km/h, speed limiter system 8 km/h, reverse gear, grab handles A-pillars, rear door without glazing (opening angle 180 degrees), comfort lighting in passenger/cargo compartment, charging cable with type 2 plug (20 A, Mode 3), LED cargo area lighting, multifunction steering wheel including trip computer, Parktronic system (PTS), tire pressure monitoring system, reversing camera, windscreen wipers with rain sensor, seats in cab: front passenger bench seat, pre-conditioning, front two-way speakers Further equipment: Third brake light, adaptive brake light, passenger airbag, driver airbag, acoustic environment protection (external sound), hill start assist, aspherical exterior mirrors, both exterior mirrors manually adjustable from inside, outside temperature display, brake assist, braking system with ABS and ASR, electric motor 85 kW (continuous 70 kW), driver assistance system: active brake assist, driver assistance system: Attention Assist (drowsiness detection), driver assistance system: breakdown management, driver assistance system: Crosswind Assist, gearbox for electric vehicle, front cup holder, seat belt tensioner, lockable glove box, high-voltage battery 60 kWh, body/construction: standard van, body/construction: long, communication module (LTE) for digital services, HV battery charging power 11 kW (AC), HV battery charging power 50 kW (DC), full bulkhead, steering column mechanically adjustable, headlight range adjustment, Mercedes-Benz emergency call system, model update, rear fog lamp, wheelbase 3,200 mm, sliding door cargo/passenger compartment right, electromechanical power steering, seat belt warning system (driver/passenger), seat cover/upholstery: Caluma fabric, cab seats: heated driver's seat, cab seats: driver's seat adjustable ...

Condition: ready for operation (used), Reconstructed in 2016 Size: max 300 x 300 mm min 105 x 105 mm Product thickness: max 20 mm min 1 mm Speed: max 3600 c/h Equipment: infeed with hand fed • infeed inline • cover magazin • case pre stack belt • casing-in station • belt delivery • central lubrication • 1 set of operating manuals • 1 spare part catalogue • 1 set of electrical diagrams Lsdpfx Aedyk Rnebcehd • 1 set of standard tools • standard equipment

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Lhedpod S Svhofx Abcsd Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Condition: excellent (used), Plastic crates, available quantity: 5,000 pieces, dimensions: length 60 cm x width 40 cm x height 17 cm. The crates are certified for food contact and stored in a warehouse. Very sturdy crate, designed for heavy loads. Smaller purchase quantities possible. Lhsdoytyk Uspfx Abcsd

Condition: new, functionality: fully functional, power: 105 kW (142.76 HP), color: other, Year of construction: 2026, Equipment: cabin, cruise control, hydraulics, onboard computer, CONSTMACH Compact-60 is a high-performance compact batch plant model specially designed to offer maximum efficiency in limited spaces. With a production capacity of 60 m³/hour, it combines the durability of stationary plants with the portability of mobile plants. Its compact design allows for extremely fast installation and requires minimal infrastructure. This saves the user both time and money. The Compact-60's aggregate bunker can be positioned in a linear or square shape depending on the project and site layout. The square bunker option allows the plant to be transported in a single 40 ft OT container, providing a significant advantage in transportation. Furthermore, the plant's steel-legged cement silos and metal-walled design offer easy installation without the need for concrete wall construction. The plant can be equipped with pan, single-shaft, twin-shaft, or planetary mixers for use in different applications such as ready-mix concrete, dry concrete, or precast production. Manufactured in accordance with CE standards, the Compact-60 is equipped with high-quality electronic components from SIEMENS and SCHNEIDER. The advanced automation system manages the entire production process accurately and reliably with its user-friendly interface. Compact-60 Compact Concrete Mixing Plant Technical Specifications Production Capacity: 60 m³/hour Transport Size: 13 x 2.3 x 2.3 m (square bunker type) Weight: 28 tons Total Motor Power: 105 kW Required Generator: 125 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 800 x 11,100 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 liters Additive Weighing Bunker: 20 liters Air Compressor: 300 liters / 5.54 kW Cement Silo: 50 – 500 ton capacity options Lhodpfx Asxp U Dysbcsd Control Type: Fully Automatic Why Choose the Compact-60 Concrete Plant? CONSTMACH Compact-60 combines high production capacity with a compact design, offering a reliable and economical solution for professional concrete production. Its portable structure, quick assembly advantage, and low operating costs make it ideal for construction sites with limited space. Thanks to its high-quality components, durable design, and world-class production standards, it provides maximum efficiency with minimal maintenance requirements for many years. If you are looking for powerful performance, durability, and easy portability, the Compact-60 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH Stationary-60 concrete plant is an excellent solution for medium-scale and long-term ready-mix concrete projects. Equipped with a fully automatic control system, this plant offers high efficiency and continuous production capacity. Its flexibility to produce all types of concrete allows it to easily adapt to different project requirements. With its durable steel construction, CE-compliant production, and low maintenance needs, it is a plant model trusted by professionals. Stationary-60 can be configured with pan, single-shaft, twin-shaft, or planetary mixer options depending on project conditions. It can work with cement silos with capacities ranging from 50 to 500 tons, and cement filling is easily done thanks to the integrated blast bunker. Furthermore, this model can be equipped according to climatic conditions, ensuring efficient concrete production with heating systems in cold regions and cooling units in hot climates. Aggregate pre-feeding systems eliminate the need for ramps, offering flexibility in field use. In limited spaces, bucket transport systems facilitate installation. FIXED 60 Fixed Concrete Batching Plant Technical Specifications Production Capacity: 60 m³/h Weight: 38 tons (excluding cement silo) Lhsdpfx Ajxp Uxqsbcod Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan - Single Shaft - Twin Shaft - Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters - 5.5 kW Cement Silo: Options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the Stationary 60 Concrete Plant? CONSTMACH FIXED 60 is a concrete plant that stands out in the industry in terms of both performance and durability. It ensures uninterrupted production with its long-lasting components, high-quality production standards, and superior automation system. Its adaptability to different climatic conditions, energy efficiency, and modular structure provide a more than satisfactory return on your investment. CONSTMACH's strong technical service support, extensive spare parts network, and international production experience make the Stationary-60 not just a plant, but a long-term business partner. If you are looking for a reliable, high-capacity, and economical concrete plant, the CONSTMACH Stationary-60 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 105 kW (142.76 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH Compact-60 is a fully automatic compact concrete plant specially designed for projects requiring high production performance in limited spaces. Despite its compact design, it meets the needs of medium and large-scale projects with a production capacity of 60 m³/h. Thanks to its modular and ergonomic design, it requires minimal site preparation; it can be easily installed on a flat surface. The aggregate bunker can be positioned in a linear arrangement as in stationary concrete plants or in a square layout as in mobile plants. When the square bunker option is chosen, the Compact-60 can be transported in a single 40 ft. OT container, offering significant advantages in transportation and installation costs. Manufactured in compliance with CE standards, the Compact-60 offers a long-lasting and low-maintenance system thanks to its high-quality components. Complex automation processes are fully automated using SIEMENS – SCHNEIDER brand electronic components and advanced PLC control systems. The user-friendly software interface allows for easy control at every stage of the production process. The Compact-60 delivers high performance in ready-mix concrete, dry concrete, or precast production with twin-shaft, single-shaft, pan, or planetary mixer options. Belted Compact-60 - Compact Concrete Plant Technical Specifications Production Capacity: 60 m³/h Transport Position Dimensions: 13 (L) x 2.3 (W) x 2.3 (H) m (square bunker) Weight: 28 tons Total Motor Power: 105 kW Required Generator Power: 125 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area: 300 m² Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 800 x 11,100 mm Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters – 5.54 kW Cement Silo: 50 – 500 ton capacity options Control Type: Fully Automatic Lhodpexp U Apefx Abced Why Choose the Belted Compact-60 | Compact Concrete Plant? CONSTMACH Belted Compact-60 offers solutions to all the requirements of modern construction sites with its compact design and high production efficiency. Its easy transportability, low operating cost, and quick installation feature provide investors with time and cost advantages. European-made components used in all electrical and automation systems guarantee a long-lasting and reliable production process. Manufactured with CONSTMACH's more than 20 years of engineering experience in the industry, the Compact-60 is the smartest choice that combines quality, durability, and performance. What Do We Do as Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.