Used Fkd 60 for sale (21,606)

Condition: new, Year of construction: 2026, Thanks to the adaptive heat exchanger pump, the Pastomaster HE features intelligent technology that ensures the highest possible quality. It significantly micronizes the fat globules in the mixture to a fineness of 2-5 microns, creating a creamier ice cream base. The one-piece heat exchanger ensures maximum hygiene, even when using raw milk. Technical specifications: Blsdpfxe Agpu Ne Ahdjp * Stainless steel construction * Motor speed for whipping: 7 levels * Capacity: Min: 15 L / Max: 60 L * Condenser: Water condenser * Power: 7kW / 50 Hz / 400V * Dimensions: 350 x 900 x 1050 mm (W x D x H) * Weight: 165 kg The Pastomaster HE ensures significant water savings, up to 30%, compared to pasteurizers in the RTX line. The machine is equipped with the patented “Adaptive” technology that manages the mix. The exchanger pump ensures high micronization of the fat globules to achieve creamy and stable gelato; the monolithic bowl ensures maximum hygiene even when using raw milk, while the new conveyor design allows the machine to handle mixes with different viscosities. Minimum filling levels can be handled without the risk of burning the mix, thanks to the unique “dry” bain-marie system.

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Blodpfez Iqt Esx Ahdep Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, including 36 plastic plates and 2 end plates of stainless steel dimension ca. 260x90x160 cm Bledpfx Ahs Ahldwodop Distance between first plate and spindle approx ca. 120cm

Condition: used, Filter housing of stainless steel for plates 600 x 600, with manual hydraulic. Size for 80 plates. 78 plates on stock. Plates maximum: 80 Plate formats: 600x600 Bjds Ahluxjpfx Ahdjlp Platefilter features: Manual spindl

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. Bsdpfx Ahezr Ixcsdslp – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: used, Year of construction: 2019, Motan Luxor EM A 60 Dry Air Generator / Drying System (2019) designed for efficient plastic granule drying. This unit delivers a precise dry air flow to maintain optimal dew points and process stability in plastics processing (injection molding / extrusion). Technical Specifications : Operating Voltage : 400 V / 50–60 Hz (3PE) Control Voltage: 24 V DC Nominal Current : 11 A Backup Fuse : 16 A Bodpfx Ahoz Rt Iljdelp Short-circuit Current : 6 kA Max. Weight: 195 kg Drying Bin Capacity: 60 L Process Air Flow Rate: approx. 20–25 Temperature Range: 70–140 °C

Condition: used, functionality: fully functional, Table dimensions (x-y/mm)  890 x 458 Ram dimensions X-Y (mm)  890 x 458 Stroke (mm)  20 - 76 Slide adjustment (mm)  80 Type of strokes  adjustable Bedpfe Agb Eqox Ahdslp Strokes per minute  70 - 750 Overhauled in 2021

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Bedexg Igiepfx Ahdolp

Condition: used, mileage: 4,62,956 km, power: 265 kW (360.30 HP), first registration: 07/2010, fuel type: diesel, number of seats: 60, gearing type: mechanical, next inspection (TÜV): 10/2027, emission class: euro5, color: white, brakes: retarder, Year of construction: 2010, Equipment: ABS, air conditioning,

Condition: used, Year of construction: 2003, Temperature Control Unit Manufacturer: GWK Model: teco cw 60 Year of manufacture: 2003–2008 Blodszbc Hbepfx Ahdsp Technical data: - Circulating medium: 25 °C - Cooling capacity: 10 kW - Electrical connected load: 5.45 kW - Operating/control voltage: 400–415/24 V / 50 Hz - Rated current/max. back-up fuse: 15.2 / 25 A In our assessment, the temperature control units are in good used condition. The offer includes 2 units. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Maschinenfabrik Liezen Industrial Impact Crusher, Blow Bar Crusher, 22 kW, Used machine Manufacturer: Maschinenfabrik Liezen G.m.b.H. Type: CI 85-60 F Serial number (Masch. Nr.): 92 117 20 Electric motor manufacturer, power: Siemens, 22 kW (1460 RPM, 400V) Condition: Used, industrial execution Overall dimensions(crusher): 2300 x 1600 x 2000 mm Installation dimensions: 3430 x 1540 x 1900 mm Motor dimensions: 1000 x 1000 x 620 mm Feed opening size: 620 x 320 mm Technical and operating parameters: Bedpsz D Hb Rjfx Ahdelp Crusher rotor design: 3 pcs impact bars (blow bars) Drive: 22 kW Siemens three-phase electric motor (141 kg) Execution: Heavy-duty construction with wear-resistant internal lining plates

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,568 h, load capacity: 2,500 kg, lifting height: 6,640 mm, free lift: 2,150 mm, load center: 500 mm, fuel type: electric, mast type: simplex, battery capacity: 775 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), total height: 2,925 mm, Equipment: 3rd hydraulic function, CE marking, UVV, full service history, sideshift, Still RX 60-25 L electric forklift with the following technical specifications: Blsdpfxo Adnx Re Ahdop · Operating hours: 2,568 · Lifting capacity: 2,500 kg · Lifting height: 6,640 mm · Overall height: 2,925 mm · Year of manufacture: 2016 STILL 2.5-ton electric forklift with front and roof windshield, very good battery, non-marking tires, triplex mast with full free lift, integrated side shifter, lighting, single-pedal operation, multi-lever control, fork length 1,200 mm (other fork lengths available on request), charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively with our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our website.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Bjdjxu Db Eepfx Ahdelp

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours Bedpfxjz Spa Ns Ahdjlp * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, empty load weight: 8,450 kg, axle configuration: 3 axles, first registration: 09/2017, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2017, mileage: 6,21,201 km, ref: W0013566 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Electrical cable for refrigeration unit, * Fire extinguisher: 1, * Refrigeration unit, * Document box, * Side impact protection, * Lifting odometer, * Wheel chocks: 2, * Tool box: 1, * Spare wheel holder: 2, Blodpo Ahr Izofx Ahdop * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-decking system, * Double-decking beams: 21 VIN: WSM000005186419 Tire dimension: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: excellent (used), 602 USED Dough sheeter, flattener FRITSCH 60/650 E Rollfix. EXTERNAL DIMENSIONS (in cm): - W: 340 - L: 120 - H: 135 (after raising the arms 220) - arm length 140 - arm width 65 TECHNICAL DATA: Bodpfx Ae Agcykohdelp - power supply: 3x400V 50Hz - power: 1.8 kW The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1992, filling valves: 60 customs no.: 84223000 working direction: right-left (CCW) Bjdpfxe Ahk Ips Ahdolp

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 Blsdpfxszf Nn Ss Ahdep turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: excellent (used), Equipment: foot remote control, Capacities: Force: 60 tons Punching: Ø28 x 15 mm Ø38 x 11 mm Shearing of flat material: 200 x 20 mm Bodpfx Ahj Adrcyjdslp 300 x 15 mm Angle iron: 120 x 120 x 12 mm Solid material: Ø 40 mm 35 x 35 mm Length stop is included with the machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, High Quality, fully serviced and well maintained used Edwards Pearson pr6 cnc pressbrake for sale Edwards Pearson PR6 60 / 2550 CNC Pressbrake 2.5metre x 60ton / 2550mm 4 axis back gauge – z1, z2, x and r axis – 6axis in total Crowning for your thinner gauge steels Bodpfxsw I Dkns Ahdolp Cybelec cnc control Machine in good working condition including a good selection upper & lower Pressbrake tooling Serviced by Bystronic uk We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Bodpez Iqpysfx Ahdslp Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, functionality: fully functional, Manufacturer: STILL Model: RX 60-25 Load capacity: 2500 kg Lifting height: 5540 mm Fork length: 1300 mm Operating hours: 12695 Blsdpfx Ao Adp Dushdep Electric forklift with extension (1600 mm)

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Bledpoz Iqyxefx Ahdsp Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), CATALOGUE NUMBER 7990 Bjdpsztxgaofx Ahdolp TECHNICAL DATA - Shaft width 630mm - Max thickness of workpiece 200mm – Top: - Ratchets - Toothed feed roller - Pressure rollers - Planing roller - Pressure rollers - Smooth withdrawal roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor approximately 5.5kW - 2 feed speed settings - Feed motor 0.55kW - Dimensions L/W/H 1200x130x1100mm - Weight 1093kg ADVANTAGES - German-made - Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Blsdpfjz Iqrusx Ahdep Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request