Used Flake Ice Ready for sale (49,704)

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Rjdpfsr Hqgxox Aansck

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Rodefbl E Sopfx Aansck Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Redpfxeh U Rznj Aanjck Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Rjdpsd I T Exsfx Aaneck

Condition: new, functionality: fully functional, overall weight: 438 kg, Spicer Powershift Transmission series 24000 Model 3019FMHR24341-110 MHR MODEL The MHR Series is an integral transmission and converter assembly mounted remotely from the engine. This assembly minimizes external piping. This 3-speed powershift transmission is designed to handle heavy-duty applications, including lift trucks, rough terrain lift trucks, front-end loaders, rough terrain cranes, and other mining, construction, and industrial machinery. Rcjdpfxov Eaqbs Aansk Input Power kW 97 to 120 Input Maximum (RPM): 3100 Turbine Stall Nm 980 Nm industrial / 1115 Nm Utility PDF brochure Service manual EN Shipping weight: 438 kg 1 piece in stock

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Current: 1.0 A Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Redpfoxbgm Rjx Aansck Prices are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. We look forward to hearing from you and implementing your ideas together! Example: KM Pro KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling - Walls made of galvanized sheet steel Rcodpfjtxcpwsx Aanok Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: used, Year of construction: 2018, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Rsdpfevhcpljx Aansck Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines.

Condition: used, WORK TO BE REPRODUCED ON THE SCOLPITRICE TYPE T4: 2 left-hand pieces, 2 right-hand pieces, Spindle center distance: 220 mm, Rsdpfx Aaoxtqpmonjck Maximum working length: 1250 mm.

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Rodpfx Astvfcmeanjck

Condition: ready for operation (used), functionality: fully functional, overall weight: 480 kg, The Clark-Hurth Spicer 13.5 HR 28369-1 Gearbox is a heavy-duty transmission system for industrial and off-highway applications. Known for its durability, high torque capacity, and reliable performance, this gearbox is widely used in construction equipment, material-handling vehicles, and other demanding industries. Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Additional Information PDF Brochure Available (Contact us for details) Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Recommended Applications ✔ Material handling & logistics ✔ Construction & mining machinery ✔ Off-highway vehicles ✔ Heavy-duty transport equipment Why Choose This Gearbox? ✅ Genuine Clark-Hurth Spicer OEM part – Ensures perfect fit and performance ✅ Robust and durable construction – Designed for heavy industrial use ✅ Smooth and efficient power transmission ✅ 1 piece In-stock & ready for dispatch Rjdpfxov Eagpo Aanjck Clark Hurth transmission,wheel loader gearbox, industrial gearbox, heavy machinery parts, powertrain, reduction gearbox, drive train, loader gearbox

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. Rcedpfoxuhw Dex Aansk ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Rsdotxcyiopfx Aanock Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Rcjdoumpg Rspfx Aanjk

Condition: new, -Overall dimensions (W x D x H): 1300 x 2750 x 2668 mm -Chamber dimensions (W x D): 820 x 1650 mm -Number of decks: 4 -Number of doors: 1 door of 820 mm per deck -Left-hand control panel -Right-hand door handle -Baking surface: 5.45 m² -Electrical power: 27 kW -Weight: 2200 kg -Maximum baking temperature: 300°C -DIGITAL control panel with 99 programmable settings (optional: TOUCH SCREEN) -Energy control: BI-TEMPERATURE with 2 independent probes and separate crown/base temperature management -Steam: equipped with independent steam devices positioned under each deck and steam evacuation system Ideally suited for baking bread and pastry products, the 4-deck 82 electric deck oven is designed to deliver outstanding performance in a compact format. With a door width of 820 mm, this oven is perfect for areas with limited space or restricted access. Key Features Rjdpfx Aasw H R Uljneck - Maximum Baking Temperature: Up to 300°C, ideal for a wide range of bakery and pastry products. Ndeyow H R Ule Tdxugea - Control Panel: Digital, with 99 programmable settings and multi-stage analog control, equipped with a weekly timer for automatic startups (Touch Screen option available). - Energy Control: Dual-temperature with two independent probes and separate deck/base temperature management for precise baking control. - Exterior Finish: Stainless steel for maximum durability and hygiene. - Baking Slabs: Combination of refractory gravel and cement with metal reinforcement for uniform baking. - Steam: Independent steam devices positioned beneath each deck and steam evacuation system. Why Choose the 4-Deck 82 Electric Deck Oven This electric deck oven is the ideal solution for bakers and pastry chefs looking to maximize production while minimizing footprint. Its innovative design and extensive features ensure perfect baking results every time. The listing was translated automatically. Translation errors are possible.

Condition: used, Shear/Punching machine FICEP 604 N Year of construction: 2002 Shear capacity: 60 T Iron cutting capacity: 100 x 100 x 10 mm Cutting capacity in the round: Ø 45 mm Square cutting capacity: 42 mm Shearing: Length 350 x 16 mm max (see abacus) Punching: Max Ø 32 x thickness 16 mm Supplied with many punches Voltage: 380 V Dimensions (L x W x H): 1700 x 800 x 2200 mm Rsdpfxoxnixvs Aaneck Weight: approx 2 T

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg Rcedpotwm Ubsfx Aanjk This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: like new (used), Year of construction: 2017, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Rodjwm Emvopfx Aanock Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Recess: mm 510 Working height: mm 955 Stroke length (punch) from 0 up to mm 40 Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Motor power kw 4. Large hole device up to diameter 46mm included in the supply.

Condition: new, Year of construction: 2025, Starter Kit KM Pro for Powder Coating Consisting of Electric Curing Oven KM Pro + ASAP XS Eco In stock and available immediately Electric Curing Oven KM Pro ✅Heating medium: Electric ✅Heating type: Circulating air ✅Heating capacity: 30 kW (continuously adjustable) ✅Circulation air motor: 1.5 kW up to 250°C ✅Connected load: 380-400 V, 32 kW ✅Insulation: 150mm compressed ✅Working dimensions: 2200mm (L) x 1900mm (W) x 1700mm (H) ✅KM Pro control unit with crystal-clear touch display and intuitive operation ✅Remote maintenance KM Pro optional (additionally for only €2,200.00, controllable via smartphone or PC) ✅Loading via double-wing door ✅2x rack trolleys, half size for simultaneous curing ✅Automatic exhaust via actuator for smoke and temperature extraction ASAP XS Eco Powder Extraction ✅4,000 m³/h extraction capacity ✅2 polyester filter cartridges, each with 20 m² filter area ✅Working dimensions: 2300mm (H) x 1600mm (W) ✅Jet-pulse filter cleaning, manually switchable ✅Collection container with rollers ✅Powder baffle plate ✅Silencer for pleasant working noise levels ✅Mobile, can be rolled ✅Extraction fan 1.1 kW with IE3 motor ✅Sturdy construction made of galvanized sheet metal ✅Ready to connect via 16 A plug Now together for just €35,990.00 net, plus shipping For more information, feel free to contact us. LEASING / HIRE PURCHASE Together with our financing partner, we are happy to offer you leasing and hire purchase options (subject to good credit rating). Contact us for details. KM Industrieservice – The machine builder for your surface technology needs, specializing in powder coating. We manufacture: • Curing technology (electric, gas, oil, infrared, wood chips, hybrid) with certified curing results, available as KM Basic or KM Pro versions • Extraction and filter systems as standalone or cabin solutions in various designs • Pre-treatment systems for wet-chemical cleaning prior to coating, ensuring ideal adhesion conditions (manual, automatic, in all versions) • Blasting technology, manual or automatic, from small parts up to heavy-duty • Transport technology – for efficient parts transport (manual, automatic, lift-lower units, transverse shuttles, combination devices, and much more) • Remote maintenance – Fast and flexible service interventions Our Service Promise: ✅Highly individual consulting, manufacturing, and production tailored for even the most demanding requirements, all from a single source ✅Perfect fit and reliable delivery ✅In-house, German-speaking service technicians ✅Manufacturer expertise – As the OEM, we know your equipment inside out, and you can always count on immediate support. ✅Top-level and rapid spare parts availability ✅Long-term assistance for durable systems A video says more than a thousand words – Visit us on social media: ✅Instagram: km_industrieservice Rcjdpfx Ajxtf Azeanok ✅Facebook: KM Industrieservice Would you like an in-depth consultation? We are happy to advise you personally: ✅02153-1377061. We look forward to your inquiry and to finding the right solutions for you!

Condition: like new (used), Treif Breadslicer 10/12/14MM Rcjdpfx Aoumphboanek

Year of construction: 2008, condition: refurbished (used), CARNITECH VISION SLICER IPS 3000 ID.NO. 2191 Carnitech Vision slicer IPS 3000 för lax. Automatisk brett påläggning års mod 2008. Rcsdpfx Aashpz Uvonsk

Condition: new, Year of construction: 2024, Basic info: • Intuitive 7" touchscreen display on the rotating applicator head, with convenient position lock • Up to 20 user programs • 3 automatic programs: flat, hard-to-reach surfaces, repainting • Handle and foot for easy transport in the paint shop • Gun rest handle prevents the gun from falling off the applicator • Powder cable holder prevents damage and optimizes powder flow to the gun • Accessories drawer - nozzles and spare parts • Attractive, modern design • Quick color change with collection directly from the box • Automatic cleaning function - gun blow-off • Remote control of paint amount and program changes from the handle level • A complete set of hoses included; 6m - antistatic hose • Stand with vibrator and suction unit with fluidization Additional info: • Powder consumption up to 200g/min Rsdpfxsflpi Ns Aaneck • Air consumption up to 200L/min 6 Bar • Air quality / water vapor - less than 1.3g/nm 3 • Air quality / oil - less than 0.1mg/nm3 • ATEX compliance 2mJ

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog Rsdpfxeflmdbe Aaneck

Year of construction: 2020, condition: new, Automation Rcsdoflq Spepfx Aanjk Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction.The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore. ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual. Filter clogging sensor The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out Automatic filter cleaning The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore.Low volume Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction. Broach through the cabin The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore.Automatic filter cleansing ROMER's cabins are equipped with an electronic automatic filter cleaning system. Booth has an adjusted range of cleaning interval, time of the impulse. Each filter can be cleaned individually by using control buttons. We know from experience that it's hard to expect from an operator to clean every single filter entirely. Thanks to this system operator won't have to worry about it anymore. Booth drive-through chain Thanks to installed drive-through chain there is no need for an operator to drag every element into the booth himself.Elements drive through the booth all on their own which improves the efficiency and allows operator to focus just on the painting part.Regulated air suction In our booths we install an anti-static plate that covers filters. It protects filters from a first wave of a powder. In a well designed booth it also improves the velocity of air moving across the painted element that reaches filters. It improves suction and makes painting easier. Rjdpfx Asfzkzheaneck