Used Flange for sale (1,537)

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/170/H305 mm Fpodpfx Absrtcdzs Tok -Weight: 10.3 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Fedsrp Ik Sepfx Ab Tepk -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 40 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 7.7 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Fpsdpforrzczjx Ab Tjk -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 180/140/H250 mm -Weight: 5.9 kg/pc.

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm/M12 -Dimension: Ø 210/H30 mm -Weight: 5 kg Fjdpfjfghcwsx Ab Topk

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Fpsdpfx Ajf Ek Hisb Tjk -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 76 mm -Take: short taper 6, cone Ø 105 mm -Dimension: Ø 210 x 65 mm -Weight: 3.5 kg Fodpjf E Ivysfx Ab Topk

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate Fjdpjuypzpjfx Ab Tspk -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 203 mm -Mount: M70 x 6.5 -Hole circle: Ø150 mm / M12 / Ø126/17 mm -Dimensions total Ø 203 x 60 mm -Weight: 6.4 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 21400 € 410.88 € 5 mm 2000 mm 250 mm 3000 mm 750 mm 1400 mm 1350 kg Fpsdoyq Suaspfx Ab Tjk Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system Throat depth: 1200 mm According to EC safety regulations Operating manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rolls

Condition: used, functionality: fully functional, Grinding wheel flange with counter flange and balancing weights two-part, consisting of • Flange cone for mounting with cone, marked 508x10 - 90x203.2 and 015 022 001 0 • Counter flange, marked 610x10 - 110x203.2 and 015 333 001 0, as well as mounted adjustable balancing weights Precision grinding wheel mounts for external cylindrical grinding machine Karstens K56, wheel bore H 203.20, large cone 60 mm 3 grinding wheel flanges with counter flange and balancing weights available The flanges are used. Price negotiable. Fodpfoy Nlh Ejx Ab Topk Our asking price is €540.00 net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Fpedpfx Ajvcy Dcsb Tek Max. workpiece 4700 Ø Maximum sheet thickness 8 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Edging unit Gluing unit with glue tank Edge trimming unit Rounding unit Edge and glue scraping unit Polishing brushes Fsdpfxsyziuto Ab Tepk Control system: StarTouch with touchscreen Only 30,217 meters of edge material processed (statistics from 12/3/26) 4482 operating hours

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Working height: 950 mm Overall length: 6560 mm with belt presser Pre-milling edging/milling unit Gluing unit Miter/straight cutting unit Pneumatic adjustment for miter/straight cutting unit Pneumatic 2-position adjustment for cutting unit MS 40 multi-level trimming unit with counter-rotation Pneumatic 2-position adjustment Profiling milling unit Multi-level scraper unit Edge scraper unit Brush unit Control: Powertouch Support rollers for narrow parts Fsdpfx Aszkamcsb Tepk Spray unit for release agent on the workpiece Spray unit for lubricant on edge material Without workpiece return 6414 operating hours and 576,091 meters of edge material processed.

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Fjdpfszfi Hhox Ab Tepk Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks Fpsdpfxeyx I Rzj Ab Tok technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Fpjdpfx Abey Iha Us Tok Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fpjdpfxozc Iw Us Ab Tek

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused -CE marking Fpsdpszivikofx Ab Tjk -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V Fpodsu Icu Sepfx Ab Tek total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. *

Condition: good (used), various accessories for grinding 10 x grinding discs (9 x grinding stones) Jung 415/520 – EUR 185/each Fodpfx Abew Iz Tyo Tspk

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 81500 € 1540.35 € 8 mm 5 mm 80 mm 10 mm 4500 mm 720 mm 95 (R 80) / 35 (R 25) mm 11 kW 4900 mm 1700 mm 2700 mm 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Fpedpfx Asyq Svkob Tok Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Fpsdpfx Aovk D Tdob Tok Sheet thickness max. 1.75 mm.

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Fedpfx Aey Tptaeb Tepk Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, Year of construction: 2006, Folding machine with rotating upper beam (straight tool on one side, segmented tools on the other) with the newly installed Prolink control system. Specification: Manufacturer: Göteneds Model: FUTURA 25 Year of manufacture: 2006 Working length: 2 600 mm Bending thickness: 2.5 mm Rear support: automatic 2 000 mm Control system: newly installed ProLink Other features: steel wheels on the rear support, adjustable folding speed, curvature compensation system, quick tool lock, tool height 150 mm. Weight: 4 290 kg. Delivery: two months after order Fodpforx N U Hex Ab Tepk If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working height: 8–60 mm Strip edge thickness: 0.4–8 mm Roll edge thickness: 0.4–3 mm Spacer on the infeed guide “EASY SIZE” device Grinding unit Infrared ceramic lamp Fodjzcwmfepfx Ab Tspk “VC-S4.1” gluing unit “SGP” glue tank with CNC dosing, replacing the standard tank Pressure roller unit “RT-V” edge trimming unit Head trimming unit “K/SEL” Flush trimming unit “R-HP Multiedge 2R” Rounding unit “ROUND X Multiedge” Edge scraper unit “RAS-HP Multiedge 2R” Glue scraper unit for surfaces “RC-N” Brush unit “SP-V” Anti-adhesive spray unit “AAR” Spray unit for final edge finishing Spray unit for delicate edges “Maestro Active Edge” control system “eye-M” operator console with integrated PC Provision for barcode reader Internal lighting of the cabin and gluing area Touch-up rollers for “Nesting” processing Compliance with European safety regulations Approximate weight: 1829 kg Only 17,304 meters of edge material processed Installed in August 2024 Available in July 2026

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Fpedpfexta E Rox Ab Tjk Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!