Used Folder Gluer for sale (748)

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Predpfsfbff Usx Aahjc Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: new, OMEC 3 rollers mechanical symmetrical double invitation rolling machine New "CE Made in Italy USEFUL IN WORK mm 2050 DIAMETER OF THE UPPER ROLLER mm 150 LOWER ROLLER DIAMETER mm 150 LATERAL ROLLER DIAMETER mm 150 MAX CALENDER THICKNESS 1,5 x D mm 4 MAX CALENDER THICKNESS 3 x D mm 4,5 MAX CALENDERING THICKNESS 5 x D mm 5 MACHINE DIMENSIONS : mm 920 x 3400 x 1100 TOTAL POWER INSTALLED : Kw 6,5 WEIGHT : KG 1700 The FX3-3 series distinguishes the mechanical asymmetrical 3 ROLLERS calenders with simple FULL INVENTORY. The side roller (bending roller), is assembled as standard with steel supports and bearings and on the outside bronze pads which guarantee maximum reliability and minimum friction. ensure maximum reliability and minimum friction over time. The rotation of the rollers is applied to the UPPER and LOWER rollers by means roller by means of reducer and self-braking motor, as well as the translations and the sheet metal clamping by means of motors and reducer of the best brands. Pjdpfxegyk S As Aahorc reducer of the best brands. Equipped with roll hardening, motorized translation and clamping, prearrangement for mounting curved rollers and conical device conical device positioned directly in the upper roller, they are today the best compromise of absolute quality and easy easy to use by the operator for the most varied cylindrical and conical calendering processes. As standard, the upper roll is opened from the side in order to extract the rolled plate. MACHINE CONFIGURATION: MOTORIZED UPPER AND LOWER ROLL in rotation with equal power. [...]

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel Podpfxsvaatfe Aahorc - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Year of construction: 2008, condition: used, Kombi-Falzmaschine - Combination Folder Heidelberg Stahlfolder KH82-4KTLL32 Seiten Seitenfalz - 32 pages cross Fold Year 2008 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Inklusive Handbücher / Included ManualsAuslage / Delivery Heidelberg SAK-94 Year 2006 - Serial-No. 0-00421 Arbeitsbreite max. 940mm / Working width max. 940mm Podpfsrp En Uex Aahjrc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2017, condition: as good as new (ex-display), -Folding closing for Pittsburghfalz Psdpfx Aedlhzueaherc -1006451, 230 V 50-60 Hz -Optionally equipped with 3/8 "baking -Maximum sheet thickness 1,2 mm 370 N / mm² -Complete, incl. carrying case and packing

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000,8 incl. rotary slitters Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees Podpfxsctui Ro Aahjrc cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.400,00 Euro ( VAT excl. ) We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery Prjdodm U Dhjpfx Aahoc

Condition: excellent (used), We offer for sale a used Koenig&bauer multi-point gluer from a renowned manufacturer. The machine is currently in continuous production and can be inspected while running. Technical Specifications: Feeder: ● 10 infeed belts (45 mm) ● Adjustable vibrating motor for the feeder stack ● 2 stacking supports in different sizes ● Two hardened adjusting flaps, independently adjustable in four directions ● Side stops with independent four-way adjustment ● Modular guides with individually adjustable belt tension ● Easily adjustable supports for longer cartons Straightening Section: ● Bases formats to the left or right side frame ● Driven upper and lower guides ● Electric guide traverse Pre-folding Section: ● Servo rear folding system for smooth and continuous 4 and 6-point rear corner gluing ● Automatic folding of various packaging types within the machine's working range ● Touch screen for quick parameter changes ● Memory for saving job settings ● PF1 and PF2 sections ● 2 sets (6 pieces) of wooden folding hooks (naked maple) in different sizes ● Polyamide guides on the final folding for 4-point boxes with lids ● Sliding end rollers on both sides of the machine in the rear folding section Final Folding Section: ● Extended folding section ● Center carrier (lower belt 30 mm, upper belt 24 mm) ● Belts with independent speed adjustment (60 mm) ● Chrome-plated guide rollers with four-way adjustment ● Easily adjustable lower left glue tank (Ø wheel 226 mm) ● 2 standard interchangeable brass glue discs (2.5 - 13 mm) ● Polyamide guides ● Two positioning swords of different sizes ● Pneumatic alignment system for "auto bottom" corrugated board packaging ● Upper guides driven from above Prodpfxewmwhfj Aahjc Delivery Section: ● Long delivery belts with push-out capability on both sides ● Side guidance ● Adjustable end rollers ● Double-adjustable 2 lower and 2 upper extended delivery guides ● Belt adjustment possible during operation Stacking Section: ● Double carriers with adjustable rollers ● Pneumatic, integrated compression stacker ● Independent speed adjustment control ● Automatic guidance and lateral correction of the conveyor belt ● Adjustable belt pressure for the stacker belt ● Motor for longitudinal movement of the upper stacker parts ● Mounted on adjustable wheels General Information: ● HHS Xact glue system with 4 glue guns ● Lower belts 50 mm and upper belts 30 mm ● Upper guide elements can be easily raised and lowered ● Standard size bearings ● Maximum belt speed: 300 m/min ● Compressed air requirement: 6-8 bar ● Machine weight: gross approx. 15,000 kg, net approx. 14,500 kg ● Solid frame construction: 25 mm ● CE Declaration of Conformity ● Compliance with directives: 2006/42/EC, 2014/30/EU, 2014/35/EU ● Motorized guides Additional Information: Disassembly and re-commissioning of the machine at the buyer's location are possible. Keywords: multi-point gluer, Koenig&bauer, carton gluing machine, used gluer, printing machine, 4-point gluing, 6-point gluing, auto bottom, Wronki, Poland, disassembly, commissioning, EXW

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm Prodpevaar Iefx Aahoc

Condition: used, Year of construction: 2006, Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH78-4KTLL Year 2006 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Pedep Symgepfx Aaherc Format / Size min. 140 x 180mm Format / Size max. 780 x 1280mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SAK-94.H Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, ZGR-2140/0,8 Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Price: 1.050,00 Euro ( VAT excl. ) Psdpfxocntk Re Aahsrc

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit Pjdsd Iq S Ujpfx Aahsrc • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Condition: used, Year of construction: 1986, machine/vehicle number: 99, Kartenkleber für Sammelhefter - Card Gluer for Saddle Stitcher Mueller Martini 315 Type C 422Year 1996 - Serial-No. 99.12964 C 422 Robatech Gluning unit - 1 gluing noise Card Gluer for Saddle Stitcher Mueller Martini 300-321-335 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Predpfx Aash Ax Riehec Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Pedpfx Asb Ngb Njahjrc Folding bench ZGR-2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates Predpeddh Evjfx Aahsc • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside out. For years. And as a manufacturer, we are always up to date. We look forward to you. Small compact folding bench RED-1250cmm for steel sheet 0.8mm, aluminum sheet 1mm with built-in beading machine and roller shears. * Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to them, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. - Possibility of regulation of the cheeks - Weight: 49 kg - bending beam: 15mm - Working length: 1.25 m - built-in beading machine -ᐳ tube diameter 14mm - Passage opening 60mm - Bending radius: 145 degrees Price: 1.100 euros + shipping costs Delivery date: every week Pjdpfx Aaocqu Svehsrc Cash on delivery or bank transfer in advance We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Year of construction: 2001, condition: ready for operation (used), Baujahr 2001 Format (1 Magazin) max 300 x 460 mm min 60 x 40 mm Format (2 Magazine) max 180 x 270 mm Pjdpfedym U Hsx Aaherc min 60 x 40 mm Stapelhöhe ca. 200 mm Mechanische Geschwindigkeit 18.000 Ex./h

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally executed folding machine is the basis for years of use of the machine. That is why it is important to have a trustworthy company by your side. Folding machine 1400/2.0mm the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm Prsdpfx Ajb H Afdsahsc the weight of the handheld machine is about 190 kilograms The maximum clear width between the beams is 80 mm Accessories: degree scale, front depth stops, rear frame for holding the sheet metal, angle stop Delivery price: PLEASE ASK Price: 1300 euros Cash on delivery / bank transfer The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros welt press optional 75 euros The machine complies with CE guidelines and has a 12-month guarantee. We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder Psdpfx Asd A Hcveahorc • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Condition: new, Year of construction: 2025, The highest precision of this folding machine guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding bench 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions Predpfxjc Uh Atj Aahsc - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts Psdpfxsdyk Rle Aahorc • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: new, Year of construction: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2140/0.8 Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Podpfx Ajci Hlfsahorc Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors plus 350 euros Manual folding machine plus 75 euros Delivery costs: PLEASE ASK Price: 1050 euros Delivery date: every week Cash on delivery and bank transfer in advance We are looking forward to your contact!

Condition: new, Year of construction: 2025, Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Manufacturing modern press brakes is our passion, which we would like to share with you. At the trade fairs we share our experience and attention to our bending machines, thanks to which we can keep improving our bending machines, without forgetting who we really work for. The quality of our press brakes is very important to us. Directly from the manufacturer Prod-Masz! New, complete machine from current production. Technical specifications: maximum working width: 3140 mm Prjdpecttgfsfx Aahoc Bending capacity: up to 0.8 mm (steel sheet) Bending angle: max 145 degrees Bending beam thickness: 24 mm Weight: approx. 400 kg Roller shears (max. cutting capacity up to 0.8 mm / sheet steel) The machine complies with CE guidelines and has a 12-month guarantee. Rotary shears 0.8mm - plus 350 euros welt press/ crusher plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Condition: new, Year of construction: 2025, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Psdpfjcgmd Ujx Aahorc Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Pedsc N Aipepfx Aaherc Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.