Used Folder Gluer for sale (683)

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Cpodpfx Afed N D Niopju Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Cpodpfedmdt Uox Afpou Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Year of construction: 2001, condition: used, Built in 2001 Codoc H Sc Ijpfx Afpjpu

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates Cjdpfx Afsd Iq S Uopepu • noise prevention delivery • delivery SBP 46

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter Cpjdodm U Dhopfx Afpju 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Year of construction: 2001, condition: ready for operation (used), Baujahr 2001 Format (1 Magazin) max 300 x 460 mm min 60 x 40 mm Cedsdym U Hopfx Afpopu Format (2 Magazine) max 180 x 270 mm min 60 x 40 mm Stapelhöhe ca. 200 mm Mechanische Geschwindigkeit 18.000 Ex./h

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control Cpedpfxed A Hcve Afpeu • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control Cjdpfx Aoddh Evjfpepu 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife Cpjdpfel Dpc Eox Afpou 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors Codpfx Afedyk Rljpspu • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm Codpfx Afscudl Nspspu - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1250 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 265 kg

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Bending machine from the only and reliable manufacturer PROD MASZ® High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench RED-2200/0.8 incl. transport rollers Bending machine Folding bench with side cutouts for bending from top to bottom. Thanks to him you will finish your window sill. In the machine construction there is a place for curved processing at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - Bending performance: up to 0.8 mm (steel sheet) - all non-ferrous metals 30% more bending capacity - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 m - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 250 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Price: 2200 euros Delivery date: every week We are looking forward to your contact! Cpodpfx Aocv S Dtjfpju Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, PROD-MASZ ® press brakes - your best choice! Reliable equipment and timely deliveries. BENDING MACHINE 2.14 m /1.2mm Anyone who knows us knows that we keep our word :) Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Bending angle 145 degrees Working length 2.14 m Width 0.90 m Height 1.20 m clear width of the pressure beam 80 mm bending beam 24mm STEEL SHEET 1.2mm Approx. 30% higher bending possibility for non-ferrous metals. Codjchuxhspfx Afpopu The regulation system enables the execution of precise bending shapes with different sheet thicknesses. The rear shelf is stable and easy to disassemble. Weight: 290kg Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week Invoices are issued with 0% as intra-community delivery or with 23% of VAT. We are looking forward to your contact!

Year of construction: 2017, condition: as good as new (ex-display), -Folding closing for Pittsburghfalz -1006451, 230 V 50-60 Hz -Optionally equipped with 3/8 "baking Cpodpfxsdlhzus Afpeu -Maximum sheet thickness 1,2 mm 370 N / mm² -Complete, incl. carrying case and packing

Condition: new, Year of construction: 2025, Hand-operated folding machine in a stable design. The machine has a stop for the same bending angle 0-155 degrees and rear stops for holding the sheet. These folding machines are characterized by a high bending performance with great weight. Excellent workmanship and practical detailed solutions convince with this bending machine, the bending capacity with 1.2 mm sheet steel is sufficiently dimensioned for most applications. Edge bench 3.14m / 1.2mm Bending length: 3140mm to sheet steel 1.2mm Bending angle: 155 degrees Cedpjcb H Eiofx Afpjpu Folding beam: 30mm Weight: 840 kg Roll cutter 0.8mm plus 350 euros We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm Codpfx Ashunv Iofpjpu - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm castors incl. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Cpodpocb H Exofx Afpsu Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Cjdpfxsh H Dk Re Afpjpu Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Cpedpfx Ajgd Dgqefpju Tool cart supplied

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Cedpfxow T Sc Ae Afpjpu Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Used 6metre Ras up and down bend cnc folding machine for sale Ras XXL Centre 75.06 System 9002 cnc control RAS TECHNICAL DATA: DIMENSION 75.06 Max. Sheet thickness (Steel 58000 PSI) gauge 16 Max. sheet thickness (Aluminium 29000 PSI) gauge >14 Max. sheet thickness (Stainless Steel 109000 PSI) gauge 18 Working length max. inch 251,97 / 6.4metre Grippers Travel Range inch 0,47 – 29,53 Grippers Positioning Accuracy inch +/- 0,004 Distance between 2 Grippers min. inch 7,09 Stops and Grippers Quantity 8 Free Space in front of the folding be-ams up to degree 300 Working Height inch 37,40 Machine Width inch 59,05 Machine Length without contori cabinet inch 257,48 Machine Height inch 70,87 Weight approx.. lbs 27 600 Compressed air bar 5,5 Drive Power Upper Beam hp 2,95 Drive Power Upper Folding Beam hp 2,95 Drive Power Lower Folding Beam hp 2,95 Speeds: Upper and Lower Folding Beam degree/s 126 Upper Beam inch/s 13,78 Grippers inch/s 13,78 Max. sheet thickness (Steel 400 N/mm2) mm 1,5 Max. sheet thickness (Stainless Steel 750 N/mm2) mm 1,25 Max. sheet thickness (Aluminium 200 N/mm2) mm 2,0 Working length max. mm 6400 Grippers Travel Range mm 12-750 Csdpogpk R Ejfx Afpepu Grippers Positioning Acuracy mm +/- 0,1 Distance between 2 Grippers min. mm 180 Stops and Grippers Quantity 8 Free space in front of the folding beams up to degree 300 Working Height mm 950 Machine Width mm 1500 Machine Length without control cabinet mm 6540 Machine Height mm 1800 Weight approx.. N 125 000 KG 12 500 Compressed air bar 5,5 Drive Power Upper Beam kW 2,2 Drive Power Upper Folding Beam kW 2,2 Drive Power Lower Folding Beam kW 2,2 Speeds: Upper and Lower Folding Beam degrees 126 Upper Beam mm/s 60 Grippers mm/s 350 Ideal for the manufacture of roofing products

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Cpodpfxon Tnzfo Afpju Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Year of construction: 2002, condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Cpjdpfx Ajgu Dynjfpsu Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Cpodpfofuakyox Afpou Year 2014 Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally designed folding machine is the basis for years of use of the machine. It is therefore important to have a trustworthy company at your side. Small, compact folding edge 1250 cm to steel sheet 0.8 mm, aluminum sheet 1 mm with built-in curl forming machine and roller shears. - Possibility of cheek adjustment - Weight: 49 kg - Bending beam: 15mm - Working length: 1.25 m Cjdpfxocgbilo Afpepu - built-in bead machine -ᐳ tube diameter 14mm - 60mm opening - Bending radius: 145 degrees Price: 1.450 euros We are looking forward to your contact