Used Frame Hydraulic Press for sale (32,961)

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg Kdjdpsz A Ia Sefx Aniju without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm - Max. pressing force: 100 t - Overhang: 400 mm Kdsdpfez R Rkfjx Anieu - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Ksdpfx Anjxvdnbjiodu

Condition: new, Year of construction: 2026, TECHNICAL DATA Kdjdpfxoi Amnpo Aniju Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: used, Year of construction: 1999, HYDRAULIC PRESS FISCHER PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm Kdodpfxsz A Am Hs Anisu

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press Kjdpfx Aney Erv Ieiodu - hole in table Ø 120 mm

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm Kdsdpfx Ansyfwxtsiju working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters Kdjdjyfwywopfx Aniou - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Year of construction: 1990, Press force: 200 t Stroke: 300 mm Frame width: 1400 mm Kjdezypkvopfx Anisdu Side frame opening: 770 mm Shut height (stroke up): 500 mm Table area: 1300 x 1100 mm Cushion force in table: 80 t Cushion stroke in table: 150 mm Cushion area in table: 700 x 700 mm Table height above floor: 930 mm

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm Kdedpszbirksfx Aniou -Weight: 32.8 kg

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Kdedpoy Ndz Rjfx Aniju Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) Kdodpfji Db Erex Anisu - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, Year of construction: 2024, neu 2024 7306 prompt, Zwischenverkauf v Italien 11800 € 205.44 € 1 10700 € 50 to horizontal verschiebbar 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 720 kg Ksdpfx Aowiq Anonisdu 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm Kdodpfx Asvc Awxonieu total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Kdsdodzqddepfx Aniju Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system Kedpofthzkefx Anisdu - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t Ksdpfxexaabfs Anijdu stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Ksdpsxu N H Hsfx Anisdu

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm Kedped H Irfsfx Anijdu 2 heating rails

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 14400 € 276.48 € 70 to horizontal verschiebbar 350 mm Kdjdpfx Aoypbrxjniou 900 mm 1050 mm max. 9 mm/s 2 kW 1950 mm 1000 mm 2250 mm 1220 kg 650 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 9000 € 173.7 € 30 to fix 350 mm 920 mm 900 mm max. 9 mm/s 0,75 kW 1600 mm 700 mm 2050 mm Kdedpfjypbuaox Aniou 430 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons Kodpfx Ajz A Aw Eonijdu TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Kdsdpfx Aovu E T Hsnisu Hand and Motor operated. Side-sliding cylinder.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press Ksdpfxetrpiio Aniedu No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm Kdsdozpblkspfx Aniou - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey (Technical specifications provided by the manufacturer – subject to change/no guarantee)