Used Friction for sale (275)

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm Hodpfxeunhd Ro Airew for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Hedpfx Asyxy D Tsirjw Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, STORTI FLEX + GSI 150 Automatic Pallet Nailing Line (Robotics and High Production) Hjdpoz Sfbnefx Airsw GENERAL DESCRIPTION: A complete, highly automated industrial installation for manufacturing wooden pallets and pallet tops is available for sale. The line combines the structural and hydraulic robustness of STORTI S.p.A. with modern technological and robotic upgrades. The facility is currently fully operational, having recently undergone a comprehensive overhaul and critical maintenance procedures. TECHNICAL SPECIFICATIONS AND COMPONENTS: The line features an advanced, fully interconnected modular architecture: Module / System Technical Model Key Features Year Central Mechanical Nailer STORTI FLEX 50M High-speed, heavy-duty monoblock gantry. 9 independent nailing heads, brushless synchronous servomotors, and a multi-format oscillating hopper. 2014 Robotic Cell ROBOT WORK-STATION 2-axis robotic station for handling and pneumatic 90° rotation of pallet tops/decks. 2014 Cartesian Robots 3 Units Integrated Cartesian systems for workflow automation. 2014 Hydraulic Nailer STORTI GSI / 150-TA Heavy-duty assembly core. Equipped with 24 nailing heads, a frame with multi-format molds (7 molds), and an 11 kW hydraulic power unit (60-65 bar). 2004-2006 Block Dispenser STORTI DAT / 2000 Automatic block/stringer feeder using a high-friction belt and pneumatic actuators. 2004-2006 Outfeed Mechanization – MODULE 7 (Storti) Finishing line including: Corner cutter (GSM/3), board milling machine, marker/stamper, pallet turner (GSA/180), and automatic stacker (AGS/230). Transfer Units STORTI GSD 4 FLEX Angular transfer unit featuring rollers and lifting chains. • Format Capacity: From a minimum of 700 x 700 mm to a maximum of 1500 x 1500 mm. • Electronics and Control: Centralized via HMI touchscreens (Schneider Electric Magelis / ESA VT100) and Schneider Lexium servo-drive technology using the CANopen protocol. RECENT MAINTENANCE HISTORY The machine is in excellent condition thanks to a comprehensive overhaul that includes: • Replacement of the gantry servo-motor cable. • Replacement of alignment bushings on the Flex 50 legs and installation of new hammers (4 units) with their respective pins. • Repair and tuning of the pallet front-cutting saw and the pneumatic cylinders for the milling units. • Repair of the tilting conveyor shaft and welding/turning of the gantry turner drive shaft. • Replacement of optical sensors, mechanical sensors, and magnetic contactors.

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. Hsdpozvhx Rofx Airew CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting Hodsy E I Hispfx Airsw • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. Hodpfx Ajz Ahr Rsirsw The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Hodjwahdqopfx Airjw Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials Hjdpfx Aisytruferjw The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Superfax PF215 letter folding machine, with its easy-to-read display, automatic feeder, and large 500-sheet stacker, is ideal for offices, print shops, mailrooms, and schools. It can handle paper up to A3 size and offers a wide range of folding options, including single fold, letter fold, zig-zag fold, gatefold, double parallel fold, and cross fold, with the ability to create custom folds. It even features micro-adjustment and skew adjustment for perfect folding results. It can process up to 8000 sheets per hour and delivers them onto its exit conveyor. SPECIFICATIONS Hjdpfx Aiezz N Eporjw Suitable for: Mailroom, Print shop, School, Larger office Paper Size: A3 / A4 / A5 Paper Weight: 45 - 105 gsm Fold Types: Z, Letter, Half, Double Parallel, Engineering, and Custom Folds Cross Fold: Yes Sheets Per Minute: 133 Sheets Per Hour: 7980 Feed Tray Capacity: 500 Speed Controller: Variable Piece Counter: Counter with Preset Functions Feed Type: Friction Hand or Automatic Feed: Automatic Feed Tires: 3 x 14mm Multiple Sheets (AKA Manual Bypass): No Conveyor for Exiting Paper: Yes Auto Shut Off: Yes Jam Detect: Yes Reload Whilst Running: No Dimensions W x D x H (mm): 939 x 482 x 558 Weight (Kg): 32

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Options: 1 x Videojet BX 6500 ( 2019 ) TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Hjdpfxsz A Dmhe Airew Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Hodpfxey Avqdj Airjw Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. Hsdpfx Asz Iy Tnsirjw SERVICE AND MAINTENANCE - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return Hedpexx Tbpjfx Airsw • Suitable for high-pressure washing • CE compliant

Condition: used, Year of construction: 2019, Extendable spiral mixer Diosna SPV 120 AD Hedpfxsz A R Aij Airew Year of manufacture: 2019 Capacity in dough: 120 kg Capacity in flour: 75 kg Bowl volume: 180 l Bowl diameter: 750 mm Bowl height from the floor: 809 mm Timer control with 2 timers Two speed settings Protective cover with safety switch Clamping lock Friction wheel drive Movable with locking mechanism Includes 2 bowl carts

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 150 kg, type of input current: three-phase, input voltage: 400 V, table length: 800 mm, table width: 600 mm, table height: 100 mm, operating pressure: 4,200 bar, warranty duration: 12 months, input current: 80 A, total height: 1,650 mm, total length: 2,200 mm, total width: 1,890 mm, overall weight: 3,000 kg, input frequency: 50 Hz, Where conventional cutting methods reach their limits, our micro-waterjet cutting machines set new standards in terms of precision, angular accuracy, and process stability. Hedpfx Aez Euxmeirsw Designed for the most demanding applications in precision machining, this system combines mechanical excellence with state-of-the-art measuring technology. The robust granite machine bed forms the vibration- and temperature-stable foundation for the highest level of sustained accuracy. In combination with contactless linear motor axis drives, traversing movements are realized with almost no friction, high dynamics, and without mechanical play. The highly efficient 5-axis tilt cutting head ensures maximum cutting quality and perfect edges by dynamically compensating for the design-related beam cone, thereby achieving an angular accuracy that is far superior to that of standard 5-axis heads. To guarantee these peak performances permanently, each system is completely measured and calibrated using a Renishaw laser interferometer before delivery. The result: Calibrated micrometer precision for your most extreme manufacturing requirements. Complete system / ready for immediate use. Leasing or hire purchase is possible through our financing partner. Do you require a different performance level or table size? – No problem, we have several machines in stock or available on short notice. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland.

Condition: used, Year of construction: 2007, offer consists of: Theisen & Bonitz booklet maker tb flex B 315 VP mit tb 304 QSM - collator tb flex B 315 VP - stitching and folding device tb sprint 304 QSM collating unit type 315: - v-belt drive - suction is adapted to pile height - double-, jam- and misfeedcontrol - safety device - bins: 15 - format: min. 7x10cm, max. 35x50cm - paper weight: 18-800g/qm - capacity: max. 3500 cycles/h Stitching and folding device tb sprint 304 QSM Hsdpj Afhpxofx Airjw Equipment: - Motorized format setting - 2 Hohner stitching heads - Friction free Knife Fold (cloth system) - Automatic layer thickness adjustment - Automatic re-press - Front cutting device for cutting to 4 cm, sections greater than 1.5 cm - Head and foot trimming each from 3 to 20 mm at about 80 pages, 80 g / sqm - - - - Stream delivery Technical details: - Speed: max. 2.800 cycles / h - Power: 400 V, 50 Hz We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2026, condition: new, SMW 600 — Plastic Pulverizer with Vibratory Sieve Industrial Rotor Knife Pulverizer for Fine Grinding of Plastic Materials The SMW 600 Plastic Pulverizer is designed for fine grinding of thermoplastic materials, including PVC, PE and PP. The machine features a high-speed rotor with rotating and stationary knives made of high-quality hardened steel. Grinding is achieved through impact, friction and centrifugal force. Fine particles are discharged by airflow, while oversized particles remain in the grinding chamber for further processing. The combined air and water cooling system reduces operating temperatures and prevents material overheating. The complete system includes a feeding hopper, belt conveyor, pneumatic conveying system, dust collector and vibratory sieve for powder classification. 1. General Technical Specifications * Model: SMW 600 * Type: Rotor Knife Plastic Pulverizer * Materials: PVC, PE, PP * Capacity: 100–300 kg/h * Output Particle Size: 30–80 mesh * Maximum Feed Size: 15 mm * Rotor Diameter: 590 ±1 mm * Rotating Knives: 26 pcs * Stationary Knives: 14 pcs * Main Motor: 55 kW * Motor Speed: 2950 rpm * Pneumatic Conveying Fan: 5.5 kW * Rotary Valve Motor: 0.75 kW * Vibratory Sieve Motor: 0.75 kW * Cooling: Air and water * Dimensions (L × W × H): 3800 × 2900 × 2150 mm * Weight: 2400 kg Capacity depends on the processed material, required particle size and operating conditions. 2. Grinding System The high-speed rotor operates with 26 rotating knives and 14 stationary toothed knives. Material is ground through impact and friction. Oversized particles remain inside the grinding chamber until the required particle size is achieved. The grinding chamber features an opening cover for easy inspection, cleaning and knife maintenance. Hsdpfx Asz Rphneirjw 3. Automatic Feeding System The feeding hopper and belt conveyor provide continuous material feeding into the pulverizer. * Feeding Method: Automatic belt conveyor * Maximum Feed Size: 15 mm 4. Cooling System The combined air and water cooling system maintains stable operating temperatures during grinding. * Cooling: Air and water * Water Inlet Temperature: Max. 25°C * Water Outlet Temperature: Max. 50°C 5. Pneumatic Conveying & Dust Collection The ground material is transported by airflow to the collection system. The system includes a pneumatic conveying fan, rotary valve, material collector and fabric dust filter. * Fan Power: 5.5 kW * Rotary Valve Motor: 0.75 kW * Dust Collection: Fabric filter 6. Vibratory Sieve The vibratory sieve separates the ground plastic powder according to particle size. * Type: Circular Vibratory Sieve * Diameter: 1000 mm * Motor Power: 0.75 kW * Application: Plastic powder classification Applications: Fine grinding of PVC, PE, PP and pre-crushed plastic waste for recycling and reuse in plastic manufacturing.

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Hjdsy Au Hqopfx Airjw Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Hsdpfx Aorgqm Hjirsw Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, LASKA FZ 175 | Emulsifier / Meat Emulsifying Cutter (Micro-Cutter) Manufacturer: LASKA Hjdpfxezgxr No Airew Model / Type: FZ 175 Serial number: 14127 Year of manufacture: 2012 Power supply: 400 V | 3 Ph | 50 Hz | 155 A Power: 91 kW Diameter: 175 mm Dimensions: 2350 x 1180 x 1300 mm The LASKA FZ 175 is a professional industrial emulsifier, a technologically advanced machine that is a key component of modern meat processing lines. This device is designed for continuous operation in medium and large-sized facilities. It is used for ultra-fine, finely granular processing, emulsification, and homogenization of fillings for sausages, frankfurters, pâtés, mortadella, and other similar products. It performs exceptionally well where a perfectly smooth, stable emulsion structure with minimal air bubbles is essential. The core of the machine is a unique, multi-stage geometry of the cutting system, working in conjunction with a 175 mm diameter disc and driven by a powerful 91 kW motor. The LASKA FZ 175 is distinguished by its patented electro-hydraulic system for automatic adjustment of the knife pressure against the disc. This solution guarantees constant, optimal cutting conditions while minimizing friction. In practice, this allows for a reduction in the wear of the working parts by up to 50% compared to traditional emulsifiers, drastically reducing operating costs and eliminating the risk of overheating the raw material.

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Hjdpsya Da Hefx Airsw Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Hjdezv Trcepfx Airjw Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We have here a HSA systems HS1000 vacuum mailtable with 2 inkjet heads available. Year 2017 but was a demo machine so is not being used much, like new! Has never seen production. Hodoy R Dhaspfx Airow Complete with a streamfeeder V1000 friction feeder and the TIPC15 touchscreen together with 2 cartridge printheads, one with 3 cartridges and the other with 2 cartridges you are able to print envelopes and documents very ease with high speed

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base Hodpsxyfmgefx Airsw - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, C4 inserting machine Octoplus 4500, 6 stations (4 grippers + 2 friction feeders). Completely overhauled in 2022. Suitable for block thickness up to 20 mm. Price on request. Hedpfx Asypgi Asirsw