Used Gear Testing Machine for sale (97,773)

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS Iodevr Hf Espfx Ab Ioa The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Isdjxdfanepfx Ab Iea Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Ijdertrzdjpfx Ab Isa Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-axis: 90 mm Travel Distance Y-axis: 80 mm Travel Distance Z-axis: 400 mm Maximum Admissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Maximum Gear Cutting Length: 160 mm Angle Maximum Milling Head Swivel Angle +A Direction: 45° Maximum Milling Head Swivel Angle -A Direction: 118° Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-axis: 7,500 mm/min Y-axis: 5,000 mm/min Z-axis: 15,000 mm/min Speeds Tool: 50 to 4,000 rpm Maximum Workpiece Spindle Speed: 3,000 rpm MACHINE DETAILS Electrical Connection Mains Connection: 400 V (AC) Supply Voltages: 400 V (AC) Iedjxvrarjpfx Ab Ioa Control Voltage: 24 V (DC) Frequency: 50 Hz Machine Connected Load: 13 kVA Cable Cross-section: 16 mm² Protection: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year of Manufacture: 2018 with Station for Part Removal

Condition: excellent (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, Reishauer RZ 400 Gear Grinding Machine 1-2 shift operation; excellent condition; fully equipped all-inclusive machine Machine under power for inspection during ongoing production Year of manufacture: 2006 Control: Siemens 840 D Machine dimensions: approx. 3.3 m (L) x 2.7 m (W) x 2.5 m (H) Machine weight: approx. 16,000 kg Condition per documentation: very good condition, complete with tailstock, oil mist extraction, filter and cooling system (Hoffmann HSF), no defects reported, sale due to low utilization Workpiece Data Workpiece diameter: 10 to 400 mm Number of teeth: 5 to 999 Face width: 0 to 300 mm Centres distance: approx. 60 to 700 mm Module: 0.5 to 8 Pressure angle: 14° to 30° Helix angle: ±45° Max. workpiece weight: 300 kg Axis Data B-axis grinding spindle: power 10 kW Speed: 4010 rpm Peripheral speed: 63/72 m/s dynamic balancing included C-axis workpiece spindle: torque 180 Nm, max speed 480 rpm Z-axis travel: 300 mm, feed rate 0 to 5.0 mm/rev Iodpjxupfcjfx Ab Isa X-axis travel: 490 mm, rapid traverse 15 m/min Y-axis shifting travel: 220 mm P-axis grinding oil nozzle travel: 80 mm W-axis tailstock travel: 640 mm, speed 12 m/min W1-axis indexing sensor travel: 250 mm, speed 45 m/min A-axis grinding head swivel range: ±48°, swivel speed 28°/s Equipment Tailstock CNC dressing unit type RP2-SW, semi-automatic Oil mist extraction Filter and cooling unit: HOFFMANN Filter type HSF 100 One flange with used grinding wheel Two measuring probes / meshing sensors Software: MMINC Version 07.02, PLC Version V3.075A

Condition: used, Year of construction: 2012, max. wheel diameter 300 mm gear width 320 mm max. module 10 min. module 0,5 ical angle 45 ° frequency 50 Hz voltage 400 V main fuse 125 A x-axis 270 mm y-axis 250 mm z-axis 320 mm A - axis +/- 45 ° B - axis 360 ° C-axis 360 ° total power requirement 89 kW weight of the machine ca. 23,5 t Isdpfxjvxwtge Ab Ija dimensions of the machine ca. 11,2 x 5,5 x 2,9 m automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Promot Automation "Cellmaster" (3 cells) year 2019

Condition: new, Special offer price €7,700 instead of €9,500, excl. VAT. - Drill head is 360° swiveling around the column and height adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made of fiber-reinforced steel ensure high efficiency, low noise levels, long service life, and virtually maintenance-free operation - Spindle made of steel – adjustable tapered roller bearings (ball bearing design) guarantee optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox features automatic overload protection and can also be manually disengaged) - Electromagnetic feed and automatic tapping device (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column - Drill column made of steel – guarantees long-term machine stability as well as high precision and angular accuracy between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment: - LED work light - Tool set for MT4 - Machine vice, 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic tapping device - Complete coolant system - Swivel device for table 400 x 500 mm - Foot-operated spindle motor on/off switch - Spindle nose with thread for tool holder Isdew A Ac Hspfx Ab Iea - Lower spindle speeds 60 – 980 rpm - Higher spindle speeds 180 – 3,000 rpm - Handwheel cross handle with 3 levers - Cross table FB102, 584 x 242 mm, longitudinal travel 415 mm, cross travel 155 mm - Milling chuck ER, MT4, 5, collet sizes 6, 8, 10, 12, and 20 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paint finish Technical specifications: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M24 / M28 - Spindle taper: MT4 - Spindle speed: 90 – 1,500 rpm - Gear steps: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat depth: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 t Iodpfx Abjxzuzis Ioa dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Ijdexanrxepfx Ab Ija Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Isdpfx Abjxvr Enj Isa Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: used, Year of construction: 2021, functionality: fully functional, Gear Measuring Machine (New / Demonstration Machine) Four-axis gear measuring machine for gearing, suitable for workpieces with a diameter up to 400 mm. All axes equipped with air bearings for maximum precision. X, Y, and Z axes made of granite for uniform thermal behavior. Granite base frame with high stability and integrated passive vibration damping system. No separate foundations required. The gear measurement accuracy complies with VDI/VDE 2612/2613, Group I. Standard equipment: Base machine with rotary table Ø 300 mm, counter bearing (tailstock) Renishaw SP600 probe CNC control consisting of industrial PC and accessories Swiveling housing for keyboard, monitor, and mouse Control panel with 2 joysticks, emergency stop button, override potentiometer Basic set of probe accessories Calibration sphere Ø 25 mm with certificate Software for remote maintenance via Internet Operating manual, technical documentation Color: Light gray RAL 9002 and Gray B – RAL 7043 TGear software: Software for the measurement of gears with external and internal toothing, straight and helical gearing (PTB certified) Profile and flank inspection Iodpfx Aboxy Iv Ro Isa Pitch and runout inspection Measurement of crowned gearings Inspection of profile and flank modifications using K-diagram Numerical measurement of tip and root relief Calculation of Wildhaber dimension, tooth thickness, measurement over 2 balls or 1 ball, or measurement over rollers Inspection of all teeth Topographical representation of the flank form based on profile and flank measurement Output of measurement reports in PDF format Additional content: TStylus – program for probe management TCali – program for probe calibration TAlign – calculation of axis positions and compensation up to 2 mm Testing according to standards (Q-DIN 3961/62), (Q-AGMA 2000), (Q-AGMA 2015)

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Own lapping system included Ijdpfxovxwpue Ab Ioa Was also operated at a lapping center

Condition: new, Special offer €5,250 instead of €5,850 excl. VAT Solberga SE2035 – Geared Pillar Drill Isdpfxsuzhx Ao Ab Iea - Drill head can be swivelled 360° around the column and height-adjusted - Gearbox built with traditional and proven technology for maximum torque – helical-toothed gears made from fibre-reinforced steel offer high efficiency, low noise levels, a long service life and an almost maintenance-free gearbox - Spindle made of steel – optimised tool concentricity thanks to adjustable tapered roller bearings - Adjustable return spring for the spindle – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox is equipped with automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping function (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height-adjustable and 360° swivelling around the column - Drill column made of steel – guarantees permanent machine stability as well as maximum precision and squareness between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment - LED work light - Tool kit for MK4 - Machine vice 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant system - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool mounting - Cross table FB102 584x242 mm, longitudinal movement 415 mm, cross movement 155 mm - Drill chuck 0 – 13 mm with arbor MK4 - Drill chuck 3 – 16 mm with arbor MK4 - Special paint finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (Steel / Cast iron): M 18 / M 22 - Spindle taper: MK4 - Spindle speed: 85 – 3160 rpm - Number of speeds: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 1785 x 700 mm - Weight: 290 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation Ijdpsxy Nhhofx Ab Ija [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Ijdpfx Aoxxpdgeb Isa Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 73866, workpiece weight (max.): 60 kg, rotational speed (max.): 2,300 rpm, overall weight: 5,000 kg, TECHNICAL DETAILS Module, max.: 7 Grinding worm diameter: 280–350 mm Grinding worm width: 84–104 mm Grinding worm speed (grinding): 1,100–2,300 rpm Grinding worm speed (profiling): 50–95 rpm Isdpfx Aoxvrzijb Ija Number of teeth, min.: 6 Number of teeth, max.: 600 Maximum permissible outside diameter: 360 mm Maximum workpiece weight: 60 kg Maximum grinding stroke: 175 mm Workpiece speed (grinding): max. 250 rpm MACHINE DETAILS Machine weight approx.: 5 t Electrical Data Mains connection: 3 × 400 V 50 Hz Machine voltage: 3 × 400 V 50 Hz Control voltage: 1 × 230 V 50 Hz / 1 × 24 V DC Contactor voltage: 1 × 24 V DC Solenoid valve voltage: 1 × 24 V DC

Condition: good (used), Year of construction: 1986, functionality: fully functional, I have two identical LORENZ LS 304 CNC gear shaping machines for sale. Both machines were manufactured in 1986; one is blue and one is green. Both machines are equipped with a BWO CNC 900 control system. Each machine has a weight of approximately 8.3 t. The machines originate from the ZF special production division. Over the past twenty years, the machines have been regularly modernized. Upgrades include, among other things, hydraulic hoses, components within the control cabinet, various drive motors, as well as the installation of relatively recent ELBATRON extraction systems compliant with German production and safety standards. The machines have been continuously serviced and are in excellent technical condition. Technical Specifications: - Maximum cutter diameter (shaping wheel): 300 mm Iedpfxexyuy Ne Ab Isa - Maximum workpiece diameter: 400 mm - Maximum module: 6 - Minimum module: n/a - Gear width: n/a - Table diameter: n/a - Table bore: n/a - Strokes min/max shaping/skiving: n/a - Total connected load: 11 kW - Machine dimensions: n/a - Control system: CNC - CNC manufacturer and type: BWO CNC 900 Both machines are in excellent condition. They run smoothly, precisely, and reliably, and are ready for immediate use.

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg Isdjvxwmtjpfx Ab Iea dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Ijdpfjxyadtox Ab Iea Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW Iedjxwl Tzjpfx Ab Isa - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, Year of construction: 1997, Technical details: Iedpfx Absxz Aw Ee Ioa max. wheel diameter: 300 mm gear width: 110 mm max. module: 6 weight of the machine ca.: 10,5 t *

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical Data – Lorenz LS 180 CNC Iedoxyatuopfx Ab Iea External gear cutting – max. outside diameter: 280 mm Internal gear cutting – max. inside diameter: 100 mm + cutter diameter Max. workpiece outside diameter: 420 mm Max. module: 5 Max. stroke length: 60 mm Stroke rate (stepless): 250 – 1250 strokes/min Machine weight: approx. 7,500 kg Machine dimensions (L × W × H): approx. 4,500 × 2,500 × 2,700 mm Additional Information Year of manufacture: 1992 Condition: good, well maintained Operational status: fully functional, ready for operation Location: Turkey Availability: immediately Inspection: test under power and inspection on site possible at any time by appointment

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D Ijdpfjxwl N Ajx Ab Ija - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm Ijdpfx Abjxz Avbj Isa boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück *

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min * Ijdpfx Ajxz Akfob Ioa