Used Gildemeister Twin for sale (237)

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Pedpfx Aotztfgobpera

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister), serial number as shown in the photo, used, with normal signs of wear, 100% functional. Psdpoi D Un Rsfx Abpjra

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, number of axes: 2, Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. Predpfxozb E E To Abpsa - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1993- Condition: Good / Fully functional- Control: EPL 2- Attached Equipment: Extraction hose/pipe visible connected to the side enclosure Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1991, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, number of axes: 2, Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. Prodjzb Ewcepfx Abpea - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1991- Condition: Good / Fully functional- Control System: EPL 2 Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. feed speed face 0,025-20.000 mm/min. power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Prjdpfxjzcfc Is Abpoa Accessories: - 3 clamping jaws - various tool holders

Condition: used, Pick-up truck pick-up control unit Predpfx Aezi U H Isbpsa Pietro Cucchi full-body loader

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates Psdpfx Abjwtct Hepjra 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min Pjdpfx Aew S Efzobpera operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, turning diameter over cross slide: 185 mm, turning length: 250 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 285 mm, total height: 1,730 mm, total length: 2,180 mm, total width: 1,610 mm, overall weight: 3,000 kg, General Application: Pedpfxszi Uqgo Abpsra The Gildemeister CT 20 is primarily used in precision machining, especially for the production of complex components in industries such as the automotive industry, aerospace, and general mechanical engineering. Due to its capabilities, it is suitable for tasks that require high accuracy and efficiency in turning operations. Advantages: - The compact design allows for efficient use of space in manufacturing environments. - The high spindle speed of 6000 rpm enables fast machining and reduces cycle times. - The versatile turret with 12 tools and 8 rotating tools increases productivity, as multiple machining operations can be performed without tool changes. - The robust spindle motor power of 7.5 kW ensures consistent performance even under heavy workloads. - The precise machine travels in the X and Z axes facilitate complex machining operations and contribute to high-quality production. Buffer battery is low, machine data needs to be checked!

Condition: used, Gildemeister italiana GD16 with LNS loading magazine Main spindle & capacities: - Max. turning diameter: 16 mm - Max. spindle bore: 16 mm - Max. turning length: 160 mm - Max. spindle speed: 8,000 rpm - Spindle power: 1.5 kW to 2.2 kW Axes & feed rate: - Rapid traverse: 30 m/min Podpjy D Nw Tofx Abpera - Control system: GE FANUC Series 18i-T Dimensions & connection values: - Total power requirement: approx. 2.2 kW to 5 kW - Machine weight: approx. 1,600 kg to 2,100 kg - Machine dimensions: approx. 1,100 mm (width) × 1,800 mm (height)

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Predpfx Ajzkh Iujbpoa Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder Pjdpfozkgqzsx Abpsra The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Prjdpfx Aezbqg Nebpja

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Podpfjy T Ikkex Abpera Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Predpfoy T Id Dsx Abpea Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm Pjdey T Iddopfx Abpora C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Prsdezh Ewhjpfx Abpja Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Prodpfxjzh Ea Nj Abpea Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 Pedpfx Aey T R Irebpjra - 6 tool holders VDI 40, installed Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons We are making room Affordable machine – ideal for export

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Pjdpjyh Hg Nefx Abpjra Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer. Prodpjnximuefx Abpea

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Prsdpfx Abeqc Ul Aspoa Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 Prsdpfjzhufhjx Abpja - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2008, operating hours: 5,400 h, functionality: fully functional, Gildemeister CTX 410 V4 Universal lathe Control system: Fanuc 32i Main drive: 21 kW, 240 Nm Turret: Sauter Prodjzg T Hnspfx Abpsa Year of manufacture: 2008 Chip conveyor Tailstock Hydraulic collet chuck, maximum bore diameter 66 mm Automatic sliding guard operation Option: Enhanced coolant pump, 12 bar, 23 l/min Coolant gun Three-jaw chuck BRD210, SMW Autoblock Foot switch for tailstock operation Documentation and export possible for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions Prodpfx Ashbal Dsbpoa - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition