Used Glazing-Press for sale (14,587)

Condition: used, Technical data: Upon request Electro-pneumatic cup hinge boring machine or fitting boring machine Schafberger+Sprödhuber type BS for drilling cup hinges or fittings with mechanical centering. Dksdpowvptfofx Afpoh

Condition: used, Pressing area: approx. 2,800 x 1,000 mm Press cylinders: 6 Heavy-duty pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. Dkedpfx Afsviwqmopeh One cylinder without pressure shoe.

Condition: used, Connection: pneumatic, 6 bar Weight: 250 kg Djdpslf H Uhofx Afpjkh Device for final assembly of grave crosses.

Condition: used, Support table: 300 x 37 cm Weight: 180 kg Dksdpfelfcntjx Afpjh Motor: 1.6 kW MAW BEV electro-pneumatic cup hinge drilling machine for drilling cup hinges or fittings.

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Dkodpfxedzqlvs Afpeh Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition

Condition: excellent (used), functionality: fully functional, Shelf press for veneering Cooper 3000×1300, water-heated Dkodpfxeyctkmj Afpeh

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Dkjdpfxjwkd Efo Afpsh Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Dkedsu Szfujpfx Afpjh Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic Dkodpfsu Icwgjx Afpeh *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) * Dkjdpfxou Nfmyj Afpeh

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: Dkodou Nfuqepfx Afpoh -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm Dksdpfx Aju Nflijfpoh *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm Dkedpfx Aju Nfq Eefpjh operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm Dedpfeu Nfttox Afpokh passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Year of construction: 1986, Technical details: pressure: 63 t Dkjdpfxeu N Dafe Afpjh no. of strokes: 65 / 130 Hub/min throat: 315 mm ram adjustment: 60 mm ram stroke: 10 - 105 mm distance between table / ram: 335 mm distance between columns: 355 mm clamping plate: 800 x 610 x 85 mm ram surface area: 450 x 280 mm compressed air: 9 bar control voltage: 24V / 50Hz V total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimension machine xH: 1,42 x 1,8 x 2,6 m Control via foot pedal *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm Dsdpfx Afjvc Awxepskh mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t Dkodpfx Asu Nfudsfpoh throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Worktable: approx. 300 x 37 cm Weight: 180 kg Dkedpfsvlw Uqox Afpsh 300281 Electro-pneumatic hinge boring machine Portas BEV for drilling cup hinges or fittings.

Condition: good (used), Code: 0276 Brand: ORMAMACCHINE Model: NPC - CE Standard Dkodpfex Iu Huex Afpeh Hot press for carpentry, furniture, custom-made furnishings, veneering, panels, doors, wooden window frames, composite materials and various - CE Standard Technical data: Working platens dimensions 3000 x 1300 mm Opening between platens 400 mm N° 6 pistons Total thrust 90 ton Platens with coils Platens heating with hot water via boiler complete with circulation pump and expansion tank Motor 2 Hp Overall dimensions mm 4600 x 1600 x 2000 h Weight 3800 kg

Condition: new, The 5 T Workshop Press is a versatile and reliable addition to the Manual Workshop Presses category. This powerful yet compact press is designed for driving in and out arbors, bushings, spindles, and pins, as well as for keyway broaching, making it an essential tool in any mechanic or repair shop. With a heavy one-piece casting design, the 5 T delivers a press force of 20 kN and features a throat depth of 220 mm, allowing for effective press-fitting, pulling bearings, aligning, bending, and broaching. The simple and stable C-frame design enhances its functionality across a wide range of applications. The manual workshop press comes complete with an operator manual, ensuring smooth operation. For those looking to incorporate a robust solution into their workspace, the 5 T Workshop Press is the ideal choice. Request a quote today to learn more about this indispensable tool in the Workshop Presses category. Dsdpfouyihisx Afpokh

Condition: new, total power requirements: 11column width: 3050pressure: 125bending length: 3050number of axes: 3weight approx.: 9600messurements (LxWxH): 3660 x 1340 x 2400stroke: 200back gauge: 500table height: 900Oil tank capacity: 120 Press brake control unit: Esa S 630 CNC 10 2D graphic screen - touch screen Control panel control panel: Pivoting pendant arm Optional Hydraulic Brake Brake Valve: With CE safety signals Press Brake Safety PLC : Mcs Plc Safety PLC Press Brake Laser Safety System: Dsp-Ap safety block (laser manual height adjustment) Back gauge for press brake: X axis, 500mm reach, including 2 fingers, manually adjustable height and sideways. Press brake fingers for backgauge: Standard Xf Arka Ve Yan Muhafazalar: Var (Ce'Li Model) Press Brake Upper Tool Clamping: Manual European Type L: 150mm (Promecam) Press Brake Upper Tool: Eurostamp 1260 / Standard (835 mm and 805 mm divided into 595 mm and 210 mm) Press brake die holder: Djdpohutz Ssfx Afpokh Mechanical European type standard width (Promecam) CNC adjustable motorized CNC crowning (V axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm divided into 100 mm left, 395 mm, 210 mm and 100 mm right) press brake Press brake front support: Xf Ön Destek Front support for press brake: 2 supports, manually adjustable in height and lateral position. Electrical System: 380V-660V, 50-60 Hz, 3 Ph ( I E 3 ) Cooling system for control cabinets: ventilation with fan Number of Foot Pedals: One

Condition: good (used), Code: 0291 Brand: ITALPRESSE Dkedpfx Afsyhdqhjpeh Model: MEC B/4 Hydraulic cold press for wood materials, panels, furniture, doors, composite materials, aluminium and various Technical data: Sturdy structure Platens dimensions mm 2300 x 1100 NEW aluminium platens top coating Opening between platens mm 300 N° 4 pistons diameter mm 70 Hydraulic control unit motor 2 Hp Thrust 50 ton Overall dimensions mm 3000 x 1500 x 1700 h

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Dkjdpfx Aown Hfijfpeh Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Djdexna S Hspfx Afpokh Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: excellent (used), Capacity: 2.5 tons Dodpfx Afjw U Aurspokh Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Tools not included in delivery