Used Glue Binding Machine for sale (86,051)

Condition: new, semi-automatic folder-gluer for 3-point and longitudinal seam gluing for minimum sheet sizes of 400x200mm and maximum sheet sizes of 1700x800mm Iodpfxsrz Rmvs Ab Isa Corrugated board quality up to 2 flute, also printed and laminated sheets

Condition: good (used), Hello, -The subject of sale is. Isdpov I E Scefx Ab Isa -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 Iedpfexxy Rkjx Ab Ija 2 glue tanks + 1 glue tank for spare parts

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 3939, working width: 500 mm, input voltage: 380 V, For sale due to business closure at the Norderstedt site Easy-to-set-up Wire-O punching machine Including 2 tools Ijdpfsx Ahdgex Ab Ioa Pitch 3:1 round holes with thumb cutout split tool Pitch 2:1 square holes without thumb cutout complete tool

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Ijdpfsk Hz Nqex Ab Ioa Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), functionality: fully functional, HANG 101--50 Electric Eyeletting Machine Electric single-head eyeletting machine 101--50 PiccoStar for eyelets No. 269 / 270 Ø 5.0 mm Automatic eyelet feed Suitable for paper, cardboard, plastics, etc. Iodpswvh Alsfx Ab Ioa Ideal for contracts and certificates Punches and eyelets in a single operation (the eyelet punches the hole) Continuously adjustable rear and side stops ensure precise alignment Push button for triggering the eyeletting process With self-piercing eyelets: up to 30 sheets at 80 g/m² paper or material thickness up to 3 mm With pre-punched material: up to 50 sheets at 80 g/m² paper or material thickness up to 8 mm Weight: 36 kg / Voltage: 230 Volts / Tools / Operating manual. The machine is in as-new condition.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SJ48233E, working width: 2,985 mm, stack height: 2,500 mm, type of input current: AC, input voltage: 230 V, overall weight: 136 kg, total height: 1,346 mm, total length: 635 mm, total width: 864 mm, GBC AP-2 Ultra. Complete with 2:1 and 3:1 Wire-O punching dies. The machine works perfectly and is immediately available. Ijdewyv Scepfx Ab Iea

Condition: good (used), Professional spine gluing machine for books, brochures, and paper blocks Sturdy German-made gluing machine, used in bookbinding and printing industries. It allows for manual spine gluing—ideal for short-run production, bindery workshops, and print shops. Features: • Manufacturer: Tünkers Maschinenbau GmbH • Model: 20118490 • Application: spine gluing of books / blocks / brochures • Manual operation – levers, clamps Iodpfx Aeu A I Rhsb Iea • Durable steel construction • Worktable with guides • Adjustable pressure and gluing position Condition: used, very good The machine is complete and fully functional. Standard signs of use are visible.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kolbus NM + PK + SW Offered as a bundle Machines are available for demonstration (The Hörauf laminating machine shown in the video is not included in this offer) Isdpfx Abjwxvfgj Isa

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. We supply new glue tanks or overhaul your used one. Iodpfxef Tc Rqo Ab Isa We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: new, Year of construction: 2024, functionality: fully functional, 4-6 Point Folder Gluer for Corrugated and Cardboard TYPE : Technofold 800 SL SIZE : 80 cm YEAR : 2024 (Brand New) DETAILS: 4&6 corner device Back folding device: - Suitable to fold rear 4 & 6-corner flaps or panels and many other designs. - Motorized and untimed electronic back folding system with intelligent servo motor technology. - Easy to set up through the main touch screen. Feeder section - Driven independently by servo motor. - Adjustable electronic pile vibrator. - Lateral feed gates fully adjustable to the width of the blank. - 6 feeder belts. - Three adjustable front feed knives. Side register section - Independent section with an unparalleled lower carrier that guides the box to a parallel handrail, allowing for perfect blank alignment. Pre-folding section - Left-hand glue flap pre-folder up to 180º. - Third crease line pre-folder up to 135º. Ijdpfxjvy T Uij Ab Isa - 1st and 3rd crease openers. Crash lock bottom section - 3 sets of upper and lower carriers. - Complete set of folding hooks and helixes to fold the front flaps of the blank smoothly and accurately. - Set of accessories for "B" lock bottom. Lower gluing section - Left lower gluing tank. - Easy to remove and clean. - Optional electronic upper gluing system by guns, upon request. Folding and Closing section - Smooth and accurate folding of 2nd and 4th creases. - Outer folding belts L&R side adjustable up to 180° with variable speed. - Two upper and lower carriers. - 25 mm lower and 30 mm outer belts on left and right carriers. - Width-wise adjustable heavy-duty compression rollers. Trombone section - Upper and lower drive mechanism for length adjustment. - Equipped with automatic belt tension-adjusting system. - Continuous and automatic box collection mechanism that ensures a neat transfer to the Press section, guaranteeing a well-aligned flow. - Electronic counter and "Kicker" for marking packets. Conveyor section - Independent and motorized press section. - Manual and automatic mode (follow-up). - Upper section moves back and forward, allowing for different box length. - 5.59 meters total length with 3.1 meters effective pressure length. - Pneumatic pressure adjustment. Processed Material Carton board max.800 gsm Corrugated flute type N,E,F & B Dimensions & Weight Length AC: 14.3m PC: 16.6m SL: 16.6m Width AC: 1.45m PC: 1.45m SL: 1.56m Height AC: 1.4m PC: 1.4m SL: 1.4m Weight AC: 7 Ton PC: 7.5 Ton SL: 8.1 Ton Capability Speed max. 300 m/min Inching speed 20 m/min Thickness of folded box max. 15 mm Blank width 800 mm Installation Electrical connected load AC: 20 Kw PC: 25 Kw SL: 30 Kw Compressed air 6 Bar Air compressor capacity 10m³/h Air tank capacity 60L

Condition: excellent (used), Year of construction: 2011, Thread sewing machine Müller Martini Ventura MC-200, mechanical speed from 18 to 200 cycles/min, max. 12,000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, overlap opening min. 8 mm, low or high overlap, stitch count standard 13, staggered 14, stitch length 16.5 mm with/without blind stitch possible for all stitch types. Iodpfx Abexfv Dtj Ioa

Condition: good (used), Book case rounding machine Prärund, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Ijdpfx Abjvt Sbuj Ija You are welcome to view the machine in our company by prior appointment.

Condition: excellent (used), For sale: Robust bookbinding press from the Swiss brand Jos. Hunkeler AG, type FNP, equipped with a Mecman pneumatic cylinder Ø160 mm, stroke 50 mm, working pressure up to 8 bar. • Manufactured in Switzerland – top-quality workmanship • Cylinder: MECMAN (Sweden), Ø160 mm, 50 mm stroke, max 8 bar • Flat working plate, ideal for bookbinding, gluing, and laminating tasks • Stable, heavy construction on castors • Integrated pressure gauge for monitoring • Lower cabinet with control panel and pneumatic supply • Serial number: 13109 The machine is in perfect working order, excellent for production, manual pressing of covers, or stationery equipment. Visual and technical condition – very good. Ready for operation. Ijdjud Avrjpfx Ab Ioa

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Kolbus BF512 Year: 2007 Format: 280 x 275 x 80 mm Specifications: Configuration: - Pre-heater - IR heater - Compact flowline - Copilot system with touch screen monitor - Automatic setting - Control table - Stand-alone pre-heating device, make: Kolbus HB 530 - Starfeeder block position detection device - Automatic block thickness control - Rounding and backing station (excluding gauzing station) - Bookmark gluing device - Head and tail banding station - Pressing station - Case pre-stacking conveyor - Case magazine - Case bending station - Case forming station - Hotmelt nozzle glue system: - Robatech glue circulation pump - Integrated book forming and pressing machine with book forming station with pressing station with delivery station Sigloch BBL 31-1 - 2008 Iodpfx Abswznkas Ioa Kolbus HD 130 three-knife trimmer - 2002 TF 90° conveyor year 2007 TFD-8.5 M drying conveyor 8.5 m year 2007 TF-3 M drying conveyor 3 m year 2008

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Format / size 100x125mm - 260x350mm Ijdpfx Abowm E Rnj Iea Book block thickness / Book block thickness 4-60 mm capacity from 500 -800 blocks per hour

Condition: good (used), Year of construction: 1990, functionality: fully functional, BOBST 3 POINT AUTOMATIC FOLDER & GLUER MACHINE • TYPE : DOMINO 110 • YEAR : 1990 • SIZE : 110 CM DETAILS: Iodsvy Tpgepfx Ab Ioa 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment Very Good Condition Immediately Available

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. Iedpsnlag Ijfx Ab Iea 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: used, machine/vehicle number: 96102, Baier Geba 45/A, machine number 96102, 2-color foil stamping, plus 1 station for die-cutting, 2 stations for foil stamping, 1 station for die-cutting, working width 14 x 14 cm, automatic feed, in good condition, immediately available. Ijdpfx Asv Ukg Eeb Iea If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: good (used), Double riveting machine 105 -06 Ijdpfx Ajuitctob Iea For riveting mechanisms onto ring binders and lever arch filing systems With braking motor drive Rivet feeders are designed for a rivet shaft diameter (with variable rivet shaft length and riveting head diameter tolerance of 2 mm) Standard configuration for working with hollow rivets with a 4 mm shaft diameter, length up to 19 mm, head diameter 6 - 8 mm or 8 - 10 mm Single riveting possible by shutting down the left (and middle) riveting head Adjustment of the rivet pitch via handwheel Fast and precise set-up thanks to integrated scales in the support table and easily adjustable stops Release via electric foot switch or via three microswitches in the rear and side stop, which enable fast and precise application With electric part counter

Condition: ready for operation (used), Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation. Iedpfxeihp Nfo Ab Isa

Condition: good (used), Year of construction: 2000, machine/vehicle number: 104, Schmedt PräCut 6501 punching and notching machine, built in 2000, machine number 104, in good condition, available immediately Ijdpjvty T Ssfx Ab Isa If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: ready for operation (used), Year of construction: 2017, A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible. Ijdpfxjwg Ez Ts Ab Isa

Condition: good (used), Embossing press Gierlich, A5, in good condition, immediately available Embossing press Gierlich P 4000, A4, built in 1985, machine number 7501, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Iedpfx Abevt Rwns Isa

Year of construction: 1995, condition: ready for operation (used), Working width: 1850mm, without accessories, spare parts or documentation, has been maintained regularly, the machine is functional for the first and second shaft, speed depends on operator and size of the package. Iodpfokly A Sex Ab Ija