Used Grain for sale (722)

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face Crodpsdz Spwsfx Aptsg - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width 10,402 mm Floor length 8,585 mm Overall width 2,550 mm Overall height to upper frame 3,550 - 3,600 mm Overall height to tarpaulin tip 3,710 - 3,760 mm Track width 2,040 mm Distance from kingpin to 2nd axle 6,120 mm Fifth wheel height 1,200 mm Axle spacing 1,310 mm Rear overhang 1,367 mm Ground height 1,400 - 1,450 mm Max. height with tipped body 9,720 - 9,770 mm Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 47.6 cbm Unladen weight 6233 kg Crjdpfx Apjp Ncb Njteg The weight is specified with an accuracy of -3%. Wheelbase 1310 Distance: 2nd axle kingpin: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal members with recessed fifth wheel plate area Welded construction, weight-optimized from high-strength S700 steel Side impact protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm fifth wheel height unloaded Rigid axles 3rd lifting axle 1st lifting axle SAF disc axles 3x 9000 kg 22.5 INTRADISC CD 2-speed transmission supports, full load (BPW Gen2 FL/SAF) Hercules) 6 solid PVC fenders Rubber mud flaps with Wielton logo behind the third axle 6 steel rims 22.5-11.75 ET=120 Wheel nut caps Tires 6 standard 385/65/22.5 tires (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted at the front of the chassis (left side)) 30 L water tank (mounted in the middle of the chassis (left side)) 1 dust bag holder on the chassis 2 dust bags Shovel and broom on the chassis, above the fender Rear extendable ladder Interior height 2100 mm Two-wing aluminum combination door, aluminum (1/2 ?) vertical with portal beam Side walls SL interior thickness 2.5 mm, fully welded Front wall tilted at 20 degrees Pallet width version 7 mm floor 2 grain pushers 2 lower tension locks Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) 680 g/m² PVC roll-top tarpaulin with quick-release fastener and aluminum winding tube (with vertical rear end with triangle attachments at the front and rear, center tube welded into the tarpaulin) Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint Body paint RAL 7001 (silver gray) Tarpaint color RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights (2 pcs.) 2x 7-pin, 1x 15-pin with EBS connection, without connecting cables to the tractor unit Lighting: Partial LED Aspöck EUROPOINT III 2 LED work lights on the support legs Additional systems Tilt angle indicator Control cable for the lift axle from the driver's cab This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and tire temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheel rims and a device connected to the EBS. Reflective warning signs Partial contour markings with Wielton logo Partial contour markings in white on the sides

Condition: good (used), Essentially consisting of: Feed hopper (15 cbm) with push cart Double-deck screening plant with feed chutes and undersize grain discharge belt Various conveyor and stockpiling belts Cedpfx Aet Uzv Hsptsrg Overbelt magnet Electrical installation with control cabinet

Condition: new, Year of construction: 2026, filling weight (max.): 60,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, PUDAS-50 , semi-automatic bagging line dedicated for fast and efficient filling of open-mouth bags. Suitable for working with plastic bags of different sizes and weights. Designed for packing wood pellets, granular products, fertilizers, grains, seeds and other products. Dosing range: 5-60kg Capacity: up to 5tons/hour Equiped with sealing unit Made in Lithuania, CE sertified Available on stock. Crodpfx Asipmxmsptsg

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Crodpezbizofx Aptjg Polystyrene disc: €600 net each

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Credsndwdhepfx Aptsg Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, tire condition: 100 %, Additional Information Chassis, Semi-trailer, Transport Company Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Attachment rail for aluminum ramps across the entire width Reinforced frame for vehicle loading Outer frame with Load-Lock profile approximately every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed in the outer frame, each rated at 10 tons 24-ton, 2-speed support winch, single-sided operation, with semi-circular lower part and straight connecting plate, with extension compensation Foldable rear support 2 chock blocks with holder Aluminum side underrun protection Galvanized steel underrun protection Quarter panel fenders in front of the 1st axle and behind each axle with anti-spray flaps behind each axle Pair of ferry eyes, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Container locking system, 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 10 pairs of lashing pockets recessed in the outer frame, internal dimensions 70 x 40 mm 10 lashing pockets recessed in the center of the floor, internal dimensions 70 x 40 mm 2 lashing/lashing bar rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer lashing bars approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, open halfway downwards. For lashing and inserting lashing bars 80 x 80: Position 2 and 4 according to Fliegl data sheet 20 lashing bars, hot-dip galvanized Note: The lashing pockets / insertion pockets are not designed for the sole securing of long materials, pipes, etc. without wrapping. Storage space for aluminum access ramps, ramps can be slid in from the rear 3 pairs of folding eyes, 10 tons, in the outer frame (1x in front of the front wall and 2x in the rear area). Axles + Suspension SAF disc brake axles Axle / chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, actuated by 3x brake (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Vehicle with tilt) Braking System 2-line pneumatic braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Credpold Ihlsfx Aptsg 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Observe overall height, exceeding height is at the customer's risk) Ride height in connection with lift axle, with the lift axle raised, the loading or overall height increases by 50 mm (with Mega Flex only at the lower ride height or saddle height) Vehicle - Driving stability system Wheels and tires 435/50 R19.5, manuf

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Cjdpfx Aslf Dtmsptorg Axles + Suspension Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket Codpfx Apsi Rivtsterg with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Saddle height approx.: 960 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Cjdoi Riwmepfx Aptorg Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. More information Fine-grained steel welded construction in lightweight design, fifth wheel plate with 2 replaceable kingpins, only 2 longitudinal beams as double T-beams for subsequent front drawbar coupling in new/current design, outer frame slightly angled with Load-Lock profile for securing lashing straps. Note: to attach the straps in conjunction with the sideboards, the sideboards must be opened!, 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation, shims with holder, aluminum side impact protection, foldable, steel under-run protection, galvanized, extendable, half-shell mudguards!!Supplied loose, not mounted!!, with anti-splash flaps behind each axle, 1 plastic water tank, capacity approx. 30 liters, on the left side in the front BPW disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, additionally manually lowerable, operable with a hand knob on the vehicle 2-line pneumatic brake system, with 1 central standard air reservoir, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module routed to the outside, attention: the trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!, with lifting and lowering valve, control unit + brake integrated into the frame as in a semi-trailer tipper, mounted in front of the axles Crsdoi Riwqopfx Aptog Brake pad wear indicator on disc brakes via ABS/EBS indicator light on the truck 385/65 R22.5, Continental brand, steel rims, factory silver 24 Volt, multi-chamber lights, yellow LED lighting on the side as in a semi-trailer tipper, dimension 3000 mm must be observed, 2 white position lights at the front in LED, loose, 2 white/red outline lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable Germany, type approval according to EC 2007/46 for the complete vehicle, 24/7 service hotline, prepared for a double license plate holder in a single row: 1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strip according to ECE R 048, Frame: DB 7350 Novagrau, landing gear: black coated Immediately available! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Crodei Riwuopfx Apteg Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Csdsi Riwxepfx Aptorg Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version Cjdpfsi Rixksx Apterg 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis * High-tensile fine-grain steel welded lightweight construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design * Parking in loaded condition not permitted; when unhooked, the vehicle must be positioned with a rearward tilt * Foldable underrun protection * Integrated mudguard mounting system with stone-repellent surface * Asphalt specification spray flaps behind last axle, hinged to mudguards with upper locking option; shortened mudguards ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Off-road axle specification * Air suspension system * 1st axle as automatic lifting axle with forced lowering and traction aid * Galvanised lifting axle mechanism ## Braking System * Dual-line compressed air braking system with colour-coded piping for simplified maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting lines) * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * Raise-and-lower valve integrated * Vehicle stability control system ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side marker lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin front sockets ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) ## Tipping Body – Stone Master Thermo Body * Round steel body in “Stone Master Design” made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Front wall access ladder included * “Membrane” tailgate design: externally mounted pendulum rear door with double hook locking system * Two clamping screws with lever fasteners on lower side * Side walls: 4 mm continuous steel * Floor: 4–5 mm steel, wear- and weight-optimised construction * Fully insulated Fliegl Asphalt Profi Thermo body * Insulation on front, sides, bottom and rear (Fliegl Isotherm system) * BASIC cover system with tarpaulin enclosure * Standing platform with access steps * Connection panel for air, electrics and braking system with large free working space for optimal handling * Sliding tarpaulin system, one-sided storage on RHS (right-hand side), with central locking on LHS (left-hand side) ## Registration & Compliance * Germany * EC type approval according to 2007/46/EC * Body strength certification according to EN 12642 * 24/7 service hotline * Manufacturer certification for thermal vehicles according to RS 10 – 2013 * Prepared for single-line licence plate holder * Warning plate according to ECE R70 Cjdpfx Apei Rix Iotjrg ## Optional Thermo Insulation Packages * BASICplus: sheet metal cladding * PREMIUM: stainless steel cladding

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Credpei Riywofx Aptjg Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket Credpfx Aoi Rizisptog 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Credpoi Riz Hofx Apteg Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Cedpfx Apei Ri Exotorg Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Vario end walls Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Cjdpfxji Ri R Do Aptsrg Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, overall weight: 3,980 kg, total width: 13,00,000 mm, This is a vibrating screen with three fractions—an apparatus designed for sorting by grain size. Robust frame, springs where the screen is mounted (to reduce vibration transmitted to the structure). Working width (1,300 mm) At the top, there are two large electric vibrating motors (5.6 kW). Csdpfxoxu Drqs Aptjrg At the bottom, you can see the screen grids (screen thickness 8 mm), through which the material is separated into three fractions.

Condition: used, maximum load weight: 30,753 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2023, loading space length: 9,800 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 50 m³, Equipment: ABS, VEHICLE NUMBER: 2821 ----* Exterior features: * Tailgate with sealing strip * Pneumatic locking system * Additional tensioning latches for the tailgate * Reinforced tailgate * Grain slide and grain discharge chute with bag * Cross supports on the hopper floor, fully welded * Holder for broom and shovel * Loading pressure gauge * Work platform with access ladder * Hydraulic hose holder in the parking position of the work platform * Stabilizing supports for full load * Aluminum rims * Roll-up cover * LED work lights * LED taillights with dynamic flashing lights * Underrun protection, foldable Crsdpfx Apeycndzetsg ----* Technology: * ROTOS axles with disc brakes * Lift axle on the 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 10/10, 2nd axle: 13/13, 3rd axle: 8/8 * Automatic lowering during tipping process * Tipping cylinder 190-250 bar * Screw coupling 1" internal thread * Hopper floor 5mm * Saddle height 1,150mm * Loading height 3,655mm * Tare weight 5,847kg * TÜV/MOT: 08/26 * Example of lease-purchase: €519 per month, term 72 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location is possible. Trade-in/leasing/financing. We make it possible!

Condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,43 t Crjdpfx Apju Tr T Eetsg dimensions L x W x H: 1,1 x 0,8 x 1,7 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Condition: new, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,160 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Approx. 55 m³ Granalu aluminium tipping semi-trailer / combination tailgate / new vehicle / also available for rental! --- * Manufacturer: Granalu * Model: AERO – Grain Tipping Trailer * First registration: - (New vehicle) * Gross weight: 39,000 kg * Unladen weight (manufacturer spec.): 6,100 kg * Payload: 32,900 kg * Axles: 3x Jost axles with first axle lift / off-road starting aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R22.5 * Colour: Tipper body & tarpaulin RAL 7001 silver grey, chassis RAL 7016 anthracite/graphite grey * EBS: Wabco * Combination tailgate (swing & pendulum gates) with 2x grain discharge chutes * 1x rotary bar lock per swing door * Additional locks on the sides and below the rear wall * Front wall sloped, 5 mm aluminium * Side walls: 6 mm aluminium, tapering to 3 mm towards top rail * Floor: 6 mm aluminium * Aluminium chassis * Aluminium landing legs * Hyva tipping cylinder (max. 250 bar), high and low pressure * Fifth wheel height: 1,200 mm (unladen) * Sliding tarpaulin with central locking * 4 crossmembers (3 pivotable) * Operator platform at front with access on the left * Internal front left access ladder * Tarpaulin hooks * Automatic lowering when tipping * Water tank * Toolbox * Aluminium ladder * Wheel chocks * Shovel and broom holder * Acoustic reverse warning system * 2x LED reversing lights * 5-chamber LED rear lights * Foldable underrun protection Credew I I H Hjpfx Aptjg * Single mudguards New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Notice regarding potential errors in this advertisement: Despite careful preparation, there may be occasional errors in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to confirm details or clarify any further questions.

Condition: used, maximum load weight: 28,847 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 06/2026, Equipment: ABS, Schmitz 3-axle aluminium grain tipper, type: SKI 24 SL 9.6, approx. 50m³, galvanized, disc brakes, lift axle, air suspension, Schmitz axles, grain slider, pendulum tailgate, platform, roll tarp, EBS, ABS First owner TÜV valid until 06/2026 - SP 12/25 Cedpfxjxb Incj Apterg 3 units available