Used Grain for sale (715)

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Duedpjudb R Iefx Afpsn Weight: 6200 kg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Djdpfx Afoxgrdfopeun Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan Dusdpju Ekfmsfx Afpjn • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor. Dsdpfx Afsxgtqmspoun

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Djdpfx Afex Iff Ijpjun Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Dujdpfx Afjx Ifgljpjn Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Dedpfx Afsxgtgnopoun Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Djdpfx Aoxgtthefpjun Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, machine/vehicle number: 431, empty load weight: 5,540 kg, maximum load weight: 29,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2013, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 1,650 mm, loading space volume: 30 m³, suspension: air, tire size: 385/65 r 22,5, color: silver, Equipment: ABS, Disc brake EBS Wheelbase 1,330 mm Roll-up tarpaulin Platform BPW axles Alcoa aluminum rims Folding underride guard Grain pusher Dedpfx Asp I Uymofpjun Errors excepted

Condition: used, maximum load weight: 28,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Kempf SKM Steel Tipping Body 50m³ 55m³ Scrap * BPW axles with air suspension and disc brakes * 1st axle is a lift axle * Tyres: 385/65 R22.5 * Aluminium rims * Roof roll tarpaulin * Work platform * 2x plastic toolboxes * Jost landing legs * Rear doors with grain chute Duedpfjyhi Hzsx Afpsn * Work lights For further information, please feel free to contact us.

Condition: new, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,430 mm, loading space height: 2,400 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Kempf SKM 36/3 AK Aluminium Tipper 55 m³ Washing unit optionally available, see photos, surcharge €8,500 net Type: Kränzle Starlet 4 • Loading length: 9,500 mm • Loading width: 2,430 mm • Box height: 2,400 mm • Box volume: 55 m³ • SAF axles with disc brakes • 1st axle liftable • Air tanks: aluminium • Aluminium folding support legs • 2 plastic toolboxes • Aluminium ladder, 4,000 mm long • Work platform with access • Foldable underrun protection • LED lighting • 2 x work lights • Cargo area lighting Dsdpfx Afow Umrnopjun • Tyres: 385/65 R22.5 ALCOA aluminium rims • Wabco brake system • Hyva tipping cylinder • Load pressure gauge • ECAS system • 20° front wall • Floor thickness: 7 mm • Grain slider • Dust bag • Shovel and broom holder • Roof tarpaulin • Water tank, 30 litres • Chassis RAL 9005 deep black • Body RAL 9006 white aluminium For further information, we are happy to assist you.

Condition: new, maximum load weight: 30,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,800 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2026, Equipment: ABS, Chassis: Weight-optimized chassis frame in new design * Lightweight 9.6 chassis, cranked, welded fine-grain steel * Axle spacing 1310/1310 mm * Side underrun protection, color Schmitz Granite, rear underrun protection foldable * Axle lift * 1st axle lift automatic/pneumatic, electric traction aid * Hydraulics * Low-pressure cylinder 170 to max.190 bar HYVA * Axles: ROTOS SCB running gear system (disc brake) * 3 x axle SCB 9 t, SP2040, FM1300, ET 120, 430 mm disc brake * Suspension * 3 x SCB air suspension type: MRH-EO30 * Brake system * Two-line compressed air brake system with standard couplings, EBS 2S/2M with stability control, automatic lowering during tipping * Double-diaphragm spring brake cylinder, lifting and lowering device with AUTO-RESET function, 2 wheel chocks with holder * CARGOBULL TrailerConnect * TrailerConnect control unit CTU including battery * TrailerConnect tire pressure monitoring system * Landing gear * Auxiliary landing gear (parking only when empty) * Lighting system: LED lighting system 24V with double round 3-chamber lamps and 1 LED rear fog lamp, Premium distributor + Flexbox with 3 sockets, 2x7 pin DIN ISO3731 + DIN ISO1185 + ISO12098 * Reversing alarm switched via reversing light * LED side marker lights linked with indicator * 2 x 2 pcs LED reversing lights separately * Installation: 2 pcs at rear and 2 pcs each side left/right * Wheels and tires: Tire brand SCB "SELECTION" Continental regional application tires (M+S) 6x 385/65R22.5 (11.75x22.5), 6x ALU wheels Dura-Bright ET 120, brand: ALCOA mudguards P00704 anti-spray mudflaps with Schmitz logo * Other chassis equipment * Tow coupling with pre-inserted bolt, driving direction left * Without rear access ladder * Large plastic toolbox, mounted in front of axle assembly, driving direction left * Body * Front wall: 20° inclined with sturdy supports for front tip cylinder * Holder for broom and shovel on front wall, working platform with access front left and ladder for bin entry (for body height from 2200mm) Side walls: * Without wear plate, outer rubber impact protection rail as crash guard and deflector for curtain straps * Tipper body/accessories * Aluminum box body (AK) 9.6, height 2200 mm, internal wall thickness 3.5mm, rounded lower chord * Internal profile seams fully welded * Rear wall: 1 pair additional locking latches, aluminum combination door 1/1 door and swinging function with swing frame and stays * Bin length 9,807 mm, double joint swing bearings for resting tailgate and combination doors, crossmember in front of rear wall removable * Automatic mechanical 4-hook locking Duedpfx Afsuaifrepsn * 2 grain slides with cover * Grain discharge funnel with bag * Floor: Aluminum floor rear approx. 3600mm in 5mm, front 5mm (AK9.6), front floor section tunnel-type, front wall suitable for cranked chassis, floor not suitable for forklift traffic * Roof-shaped crossmember with tensioning chain, 90° pivotable, removable, telescoping * Hoop/tension chains marked right and left on side walls * Tarpaulin: PVC rolling tarpaulin with roll-up tube and side stops, tarpaulin version for roof-shaped covers, tarpaulin with sewn-in center tube, tarpaulin fastened at rear with tensioning elastics at the top, roll-up tarpaulin with quick tensioning device

Condition: new, maximum load weight: 18,800 kg, overall weight: 22,000 kg, Year of construction: 2026, RSM Roll-Off Container 38m³ with Hydraulic Tailgate and Grain Pusher * Type ECO-2 Duedpfxewggn Uj Afpon * Year of Manufacture 2025 * Volume 38m³ * Dead weight 3,200 kg * Payload 18,800 kg * Load capacity 22,000 kg * Hydraulic volume tailgate * Grain pusher * All-round net hooks The RSM universal container, the all-rounder for all requirements, complies with the standards of DIN 30722 Part 2 and is an ECO Type 2 with a permissible total weight of 22,000 kg. We are happy to provide you with further information.

Condition: new, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Light BENALU SANH tipper * Aluminium chassis * Aluminium body * Pendulum tailgate, without grain slider, mud-tight * Pneumatic tailgate locking * SAF axles * 1st axle as SAF lift axle * Air suspension * Smartboard * Rotary slide valve * 4 LED additional spotlights Duedpfsxc Ad Usx Afpjn * Gear support winches * Plastic toolbox * Superstructure painted in RAL 9006 * Unpainted chassis

Condition: new, maximum load weight: 30,649 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,500 mm, loading space volume: 27 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Schmitz Cargobull SKI 24 SL 7.2 | 3-Axle Tipper Semi-Trailer | Aluminium Box Body 27 m³ Technical Data: Permissible total weight: 36,000 kg (technically 39,000 kg) * Unladen weight: approx. 5,351 kg (+/- 3%) * Volume: approx. 27.2 m³ * Internal body length: approx. 7,500 mm * Internal body width: approx. 2,440 mm * Side wall height: approx. 1,500 mm * Fifth wheel load: 12,000 kg * Axle load: 24,000 kg * Tyres: 6x 385/65 R22.5 on steel rims Chassis & Body: Weight-optimized frame with new design * Standard 7.2 frame made of high-tensile steel, welded * Foldable underride guard, suitable for road finisher * 2" king pin according to SAE standard, exchangeable * Side impact protection in Schmitz Granite * Plastic mudguards with separate lamp bracket * Mud flaps with Schmitz logo Axles & Suspension: 3 x SCB 9 t ROTOS axles, disc brakes Ø 430 mm * Automatic/pneumatic axle lift on 1st axle with start assist * Air suspension SCB MRH4-KU35 Hydraulics: HYVA hydraulic cylinder 170–250 bar (low and high pressure operation) * Smallest stage hard-chromed * Hydraulic hose with screw coupling (1” female thread, max. 250 bar) * Bracket and parking position at working platform Braking System: Two-line compressed air system with standard couplings * EBS 2S/2M including stability program * Steel air tank * Double-diaphragm spring brake cylinder * Lift and lowering device with auto-reset function * Load pressure gauge Electronics & Safety: EBS power supply via ISO 7638 + CAN * Automatic lowering during tipping * 2 wheel chocks with holder TrailerConnect®: TrailerConnect control unit CTU incl. battery * CTU module 1 (position & technical data, 12 months) * Data storage (12 months) * Tyre pressure monitoring system Lighting: 24V lighting system with multi-chamber lights * 2x 7-pin sockets + 1x 15-pin socket * LED side marker lights with indicator function * White front position lights * 2 LED reversing lights at rear * LED lane marker lights Body & Superstructure: Aluminium box body 7,500 mm, height 1,500 mm, internal wall thickness 3.5 mm * Aluminium floor: rear 8 mm / front 7 mm * Front wall inclined 20°, with sturdy supports for front tipping cylinder * Working platform with access at front left and ladder for body entry * Rear wall flap made of aluminium, inclined, with all-round sealing * 4 mechanical hook locks, including additional tension fasteners * Centrally mounted grain chute with cover * Reinforced rear end Tarp & Spriegel: PVC roll-top cover silver (RAL 9006) with side stops * Straight cover frame with swivelling/removable crossbows * Tarp operating rod (short version) Paintwork: Tipper body: Light grey RAL 7035 * Chassis: Nova Grey * Wheels: Silver RAL 9006 * Wheel hubs: Black, KTL-coated * Conspicuity markings in red (rear) and white (sides) Dujdpjxgy U Esfx Afpsn Registration: Vehicle with German documents * EC type approval including CoC * A-sign for waste transport For further information, please feel free to contact us.

Condition: used, maximum load weight: 27,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 03/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kemf SKM 35/3 Steel Tipper Body 50m³ 55m³ Scrap * BPW axles with air suspension and disc brakes * 1st and 3rd axle as lift axles * Tyres: 385/65 R22.5 * Aluminium landing legs * Aluminium rims * Rear doors with 1 grain hatch Dujdpfx Afsyhi Hnopsn * Roll-top roof tarpaulin * 2 plastic storage boxes * Spare wheel holder * Working platform For further information, we are at your disposal.

Condition: new, maximum load weight: 18,800 kg, overall weight: 22,000 kg, Year of construction: 2026, RSM Roll-Off Container 38m³ with Hydraulic Tailgate and Grain Pusher * Type ECO-2 Dujdjwgcrpspfx Afpjn * Year of Manufacture 2025 * Volume 38m³ * Dead weight 3,200 kg * Payload 18,800 kg * Load capacity 22,000 kg * Hydraulic volume tailgate * Grain pusher * All-round net hooks The RSM universal container, the all-rounder for all requirements, complies with the standards of DIN 30722 Part 2 and is an ECO Type 2 with a permissible total weight of 22,000 kg. We are happy to provide you with further information.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by agreement! 54 m³ Kempf grain tipping semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: – (NEW) * Capacity: approx. 54 m³ (10.00 m long x 2.43 m wide x 2.20 m high) * Gross weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift/lower function / rapid discharge * EBS Wabco * Kempf 400 high-performance steel sluice, throughput capacity 30–40 m³/h * 2 partition walls with 3 locking positions, sliding in overhead rails * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right (hoses not included) * Combination door (swing + double-wing door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Doors 1/3 to 2/3 division * 1x grain shutter with funnel/dust sack * Fifth wheel height from 1,170 mm to 1,230 mm * 1x approx. 4.00 m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box, rear right * Single wheel mudguards * Drop legs, aluminium * Operator platform at the front * Sliding tarpaulin with central locking * 3x tarpaulin support bows * Load manometer * Shovel and broom holder * Dual round LED three-chamber tail lights * 1x LED work light, left * 1x LED work light, right * 1x LED interior lighting with switch * Body finished in RAL 9007 grey aluminum, chassis RAL 9005, tarpaulin colour dust grey * Air tanks made of aluminum * 4 m aluminium ladder * Tyre pressure monitoring system * Access steps inside front bulkhead Duodpfxjwuyx Aj Afpjn * Floor, 6 mm New vehicle! Rental option also available!

Condition: used, mileage: 6,78,000 km, power: 345 kW (469.07 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FH460 6x2 3-way grain tipper, I-Shift transmission, HGE body with tarpaulin and side walls, long-distance cab with 1 sleeping bed, lift axle, steering axle, forklift mount, trailer hitch, differential lock, pendulum tailgate, grain pusher, power take-off, aluminum rims, auxiliary heating, air conditioning, heated seats, radio/CD/radio Test logbook First owner Duodpeyg T T Nofx Afpjn Suitable truck-mounted forklift available/Palfinger

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete selection of vehicles, including those available for immediate delivery and short notice, on our website. Excerpt from the equipment features – full specification available on request. Loading platform: * Low bed with externally mounted beams in extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are routed protected within the extendable beams, automatically adjusting to the respective low bed length * 5 pairs of tie-down rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screw-on RUD rings Gooseneck: * Gooseneck in SNT design for optimizing loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear chassis: Duodpjxarl Nsfx Afpen * Rear chassis in a short version with closed outer frame and checker plate covering * Chassis with excavator trough, closed at the rear half to accommodate air tanks * 2 pairs of tie-down rings, foldable outward (LC 5,000 daN) * 1 pair of tie-down rings, foldable outward (LC 10,000 daN) * 1 pair of horizontal tie-down rings, at front & rear of chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Make of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via the standardized EBS interface per ISO 11992 * For correct display, the truck must be able to transfer and display this data Brake system: * Brake system in compliance with EU regulations featuring EBS-E (2S2M) Electrical system: * Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lamps blink with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection * Final coat with 2 layers of 2K topcoat, single color RAL 3002 carmine red as per RAL 841GL system * Rims in silver * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Incl. the following additional features: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push buttons, with single-track axle monitoring (without installation in the tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupler instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting bolt-on container positions for 1x 20' or 1x 40' container

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO Dusdpfx Aexbmpfefpen * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: Dsdpfexarlvjx Afpoun * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: Dedpfx Afsvfxqyspoun 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. Dsdpfx Aoycfw Ejfpeun This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Year of construction: 2025, condition: new, Description: Screening deck system consisting of 1 decks for screening waste wood or wood chips. Djdpsg I Uqfjfx Afpjun input material 0-200 mm capacity approx. 80 m³/h (depending on material) material is separated into 2 fractions 0-25 mm and oversized material to be mounted on customer's own baffle walls or underframe Technical data: Screen deck 1: length = 5,200 mm; width = 1,215 mm o Outer dimensions: length = 5.500 mm width = 1.850mm o Screen surface 6,3 m², number of shafts 40 pieces o Drive 2 x 7,5 kW gear motors o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) o Lubrication of the bearings to the outside, optional central lubrication against surcharge possible