Used Granite Measuring Plate for sale (20,073)

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm Kjdpoxm R S Ujfx Aabsnc -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) Knodpfxswypp Io Aabec - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, functionality: fully functional, Year of construction: 1985, Hydraulic Guillotine Shear Make: FASTI Model: TCHE 20/10 Year: 1985 Kodpfx Aasxmgulsbjnc Technical Data Brand: Fasti Model: TCHE 20/10 Year of manufacture: 1985 Sheet capacity: 2000 x 10 mm Dimensions: approx. L 2.60 x W 2.20 (plus support arms) x H 1.60 m Weight: approx. 5 t Equipment • Motorized backgauge 1000 mm with digital readout • Angle gauge • Support arms • Cut length limiter • Manual blade gap adjustment • Pneumatic hold-up device • 1 x spare blade set All information subject to change. A demonstration is possible at any time in our exhibition hall.

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 8170, measuring range X-axis: 3,000 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,600 mm, overall weight: 7,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Kedpexni Evefx Aabonc X-travel: 3,000 mm Y-travel: 2,000 mm Z-travel: 1,600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 6,000 x 3,000 x 4,000 mm Weight: 7,000 kg EQUIPMENT Loading gantry on rollers Various clamping elements Angle plates Computer including three-axis digital display

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm Kodpfx Ajxnc N Usabsnc max sheet thickness 3.0 mm roller diameter 110 mm motor driven

Condition: not inspected (used), functionality: limited functionality, Taylor Hobson Tallyrond 300 In good condition, without computer and software (were stolen) Including side table and accessories Knedpoxpqwisfx Aabjc

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm Knedpfx Aaexm R Ipobjc -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: used, Year of construction: 2008, functionality: fully functional, MEASURING ARM FARO FUSION Year of manufacture: 2008 Measuring range: 2400 mm Software: Polyworks (please download the current version from the Polyworks website, ours is for Win XP) Dongle for the software is present and included Accessories: measuring spheres, tools, spare battery, cables, charger, and original transport case Last calibration: 2020 REV 26.8 Single point: 0.0510 mm Volumetric: 0.710 mm Further details can be found in the pictures Knsdpfoxmrymex Aabsc

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Kedpfeuplptjx Aabenc

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Guillotine Shear Make: GEKA Type: ETS 3000x1.5 mm Year: 2011 Technical Data Manufacturer: GEKA Model: 3000 x 1.5 Year of manufacture: 2011 Ksdpfx Aajxl Twdjbsnc Working length: 3,030 mm Sheet thickness: 1.5 mm (St37) Motor power: 3 kW Weight: approx. 4 t Dimensions (L x W x H): 3.90 x 2.50 x 1.70 m Equipment • Angle stop • Motorized backgauge • Elgo P40 control • Electric sheet support device • Extendable table extension • Continuous hold-down bar • Cutting area illumination • Rear safety cage • Front drop sheet chute • Foot switch • Documentation All information subject to change and without guarantee. A demonstration in our showroom is possible at any time.

Condition: good (used), Original – Stop system with coupling element for an LTS 400 / 460!! and stop extension for cutting short pieces --- Roller width 400 mm --- Heavy-duty stop, can be swung up ---- 1 piece for measuring or part lengths up to 2000 mm and 1 piece for measuring or part lengths up to 3000 mm in stock Knjdpexlufcofx Aabec

Condition: good (used), Year of construction: 1969, Hämmerle guillotine shear type AS 10, 4000x10 mm Kodpfjxmkf Usx Aabenc

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm Knodstnlz Hopfx Aabjc -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V Kjdpsxmk Hfjfx Aabenc total power requirement 26,8 kW weight of the machine ca. 0,040 t

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Kodpfetq I Rqjx Aabjnc Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm Knedoumhm Aepfx Aaboc 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Knedpfx Aaewx Hz Ssbec Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Condition: ready for operation (used), Year of construction: 2002, Main Drive Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 1800 mm Z-Axis Movement 1000 mm Ksdpfjxlvcvex Aabenc This 3-axis ZEISS Prismo 12/18/10 was manufactured in 2002. It features a fully functioning system with X-axis travel of 1200 mm, Y-axis travel of 1800 mm, and Z-axis travel of 1000 mm. If you are looking to get high-quality measuring capabilities, consider the ZEISS Prismo 12/18/10 machine we have for sale. Contact us for more information. Application Types Measuring

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. Kedpfx Aajvgzv Iobjnc It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Knodpfx Aasxl Du Tsbec

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm Kjdpoxp Nvdofx Aabjnc z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Knjdpfx Aaouipu Ejbec Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: ready for operation (used), Year of construction: 2007, Additional Equipment Measuring Probe: Renishaw TP20 Probe Change: MCR20 (6 pieces) Software: “ThomControl” (with new software version retrofitted in 2018) This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information. Knodpfxsxlvcis Aabsc Application Types Measuring

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg Kjdpfjwrl T Tox Aabenc 172 Bar Ready for delivery

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses Knodpfx Aew Raf Hsabsc VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil