Used Grid for sale (1,414)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. Ncedpfxsx D Hxfs Advsp • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: Nodpfox D Ribex Advscp • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 Njdpfx Adoymzfgovscp 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). Nodpfxohhruhe Advscp 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Ncsdpfx Adevw Hmtsvop Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: new, power: 397 kW (539.77 HP), axle configuration: 6x4, color: grey, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Nedpoywddhefx Advjcp Iveco X-Way 540 6x4 Hooklift Superstructure: Hiab Multilift XR 21 T.51 Axle configuration: 6x4, 3 axles, 2 driven axles, cab Version: AD MY, Emission level: Europe, Engine: Cursor 13 540 HP, transmission: TX-12M 12-speed HiTroniX automated, permissible total weight: 26-30 t, drive axle variant: HR-TM tandem medium (HR) with outboard planet axles, rear axle air suspension, disc brakes, Usage: MIXED (for both on-road and light off-road use), vehicle variant: CABINAT standard chassis with cab, vehicle set-up: OFF, wheelbase: 3,800 mm, standard oil dipstick and oil filler neck on the transmission, steel wheels, engine speed 1650 RPM, emission standard: EURO VI E, tires: 315/80R22.5, speed limiter: 90 km/h, steel bumper (one-piece; heavy version: three-piece), manual cab tilting device, cab add-on parts in black, AD MY low roof cab, cab roof insulation standard, electronic immobilizer and second vehicle key, storage compartments with two rear wall shelves, dashboard: plastic with black trim, COC EU type approval, plastic steering wheel, tachograph digital 4.1, smart alternator 2,880 W (24V x 120A), demand-controlled, air suspension at rear axle, parabolic springs at front axle, HR-tandem, 2 wheel chocks, rear shock absorbers, vertical dry air filter, air compressor 2-cylinder 630 cc, 2 reinforced torsion bars rear axle D 65mm, steel air tanks, mechanical battery disconnector on chassis right side, batteries 180 Ah for Heavy / 170 Ah for Eurocargo (recommended for tail lift and/or PTO use), rear suspension without spacer, trailer version for towing with continuous braking system, rear overhang: 1,495 mm, fuel tank 290 liters aluminum, AdBlue tank 50 liters, trailer socket for 24V operation (15-pin), pre-installed toll (OBU) system incl. antenna and cabling on dashboard, no receiver, Connectivity Box 4G incl. TCO service contract, tire pressure monitoring system (TPMS) with internal sensors, VDI interface for telematics services (FMS) version 4.0, transmission software ECO-Roll (freewheeling function), driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle according to ECE-27, standard rear lights, hill start assist (Hill Holder) for comfortable starting on slopes, reversing camera system, blind spot monitoring system (BSIS) right side, intelligent speed assistant (ISA), front area monitoring (MOIS), preparation for alcohol interlock (ALC) with cable, ECAS air suspension with 2 sensors, rear engine PTO for pump connection, rocking (free-swing) mode, mirror cams. Cover at AS FHS in vehicle color / at AT/AD in black, roof hatch manual, cab rear wall with window, recommended for open bodies to observe rear traffic, fog lamps incl. cornering/turn-off light, front LED headlamps, headlamp protection grid, transparent sun visor mounted externally on cab roof, flat roof painted in cab color, hot water circulation pump suitable as break heater (uses residual heat from coolant and circulates it in the system), air horn behind bumper (compressed air),...

Year of construction: 1990, condition: used, functionality: fully functional, Stainless steel mixer with a capacity of 600 liters or 1,500 kg filling weight. Lid opening with grid and option for dust extraction. Mixing screw drive 5.5 kW. Swing arm drive 1.5 kW. The mixer has not been refurbished but can be viewed in operation. Refurbishment can be offered upon request. Stainless steel pneumatic side discharge, swing arm, mixing screw, vessel, and lid. Njdpfxsyxc Axo Advscp

Year of construction: 2026, condition: new, functionality: fully functional, power: 0.7 kW (0.95 HP), overall weight: 621 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 2,112 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS COMPACT vibration screen delivers efficient material separation for recycling, construction, landscaping, agriculture, and biomass processing. Customers benefit from high throughput, flexible setup, and compact mobility, making it ideal for soil, gravel, wood chips, waste, and more. Ncodpfx Aswyl Ugjdvop Key Features: • Compact, foldable semi-mobile design for space-saving transport and setup • Two powerful vibration motors for reliable high-performance screening • Adjustable screen angle and quick-change screens (perforated, grid, bar) • Modular expansion with conveyor belts and funnel plate for up to 3 fractions • User-friendly operation with 400V connection compatibility Tech Highlights: W 1.88 m · L 1.31 m · H 2.11 m · Loading height 1.76 m · Screen area 3 m² · Qmax 30 t/h · Power 2 × 0.35 kW (400 V) · Max bucket width 1.65 m · Weight 621 kg

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A diesel jaw crusher PE250X400 with a screen typically refers to a mobile jaw crusher equipped with a diesel engine that can be used for primary crushing of various raw materials, and it includes a screening system for separating the crushed material into different sizes. Here are key features and information about such a configuration: Ncjdpjq Nfu Eofx Advep 1. Diesel Engine: - The diesel engine provides the power for the jaw crusher, making it suitable for locations where electric power may not be readily available or practical. Diesel engines are known for their durability and reliability. 2. Jaw Crusher (PE250X400): - The "PE250X400" indicates the opening size of the jaw crusher in millimeters. In this case, the jaw crusher has an inlet opening of approximately 250mm x 400mm, allowing it to crush various materials with different sizes. 3. Screening System: - The inclusion of a screen allows the crushed material to be separated into different sizes based on particle size. This is particularly useful for producing various grades of final products. 4. Mobile Configuration: - A mobile jaw crusher with a diesel engine and screen is often mounted on a mobile chassis, making it easy to move from one location to another. This mobility is especially beneficial for applications in construction sites or quarry operations. 5. Material Handling: - The raw material is fed into the jaw crusher, where it is crushed by the reciprocating motion of the movable jaw against the fixed jaw. The crushed material then passes through the screen, and different-sized particles are discharged accordingly. 6. Adjustable Output Size: - The jaw crusher typically has an adjustable discharge setting, allowing operators to control the size of the final crushed material. 7. Applications: - Diesel jaw crushers with screens are commonly used in construction, mining, and quarrying applications for processing various materials such as concrete, gravel, rock, and other aggregates. 8. Maintenance and Operation: - Regular maintenance of the diesel engine, jaw crusher components, and the screen is necessary to ensure optimal performance and longevity. 9. Fuel Efficiency: - Diesel engines are generally known for their fuel efficiency, making them suitable for applications where a reliable power source is required without access to electrical grids. When considering a diesel jaw crusher with a screen, it's important to evaluate factors such as the required capacity, material hardness, and the desired final product specifications. Additionally, choose a reputable manufacturer known for producing reliable and high-quality mobile crushing and screening equipment.

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Nsdpfx Adjyngzvevecp Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK Njdpfjypw Hxex Advocp 2 sliding doors with roller guide 6 rotary drawers Drawer dimensions: Depth = 616/480 mm, Width = 380 mm, Height = 20/45 mm Width: 1440 mm Depth: 490 mm Height: 1000 mm - Rotary drawers height-adjustable in perforated grid - Without key Weight: approx. 150 kg

Condition: used, mileage: 1,13,000 km, power: 110 kW (149.56 HP), first registration: 08/2020, fuel type: diesel, color: black, gearing type: mechanical, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Special equipment: Business package, through-loading system (rear center armrest), metallic paint finish, smoker package Other equipment: Storage package, Advantage, deactivatable front passenger airbag, driver and front passenger airbags, trailer stability program (ASL), equipment package: Connected, equipment package: ConnectedDrive Services, electrically adjustable and heated exterior mirrors, BMW Live Cockpit, onboard computer, DAB tuner (digital radio reception), wheel theft protection (wheel locks), Dynamic Stability Control (DSC) with extended features, Dynamic Traction Control (DTC), electronic locking differential, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver assistance system: Driving Experience switch, driver assistance system: Performance Control, power windows front and rear, Bluetooth hands-free kit with USB/audio interface, velour floor mats, urea tank (SCR): 20.5 liters, interior trim: quartz silver matte textured, ISOFIX child seat mounts on rear seat, body: 5-door, rear head airbag system, front head airbag system, mechanically adjustable steering column (steering wheel), headlight range control, alloy wheels, engine 2.0 liter - 110 kW 16V turbodiesel, Park Distance Control (PDC) front and rear, electric parking brake, personalization system (Personal Profile), tire pressure monitoring system, low emissions according to Euro 6d, heated windshield washer nozzles, front side airbag, service system: ConnectedDrive Services, service system: Intelligent Emergency Call incl. TeleServices, seat upholstery: fabric Grid, start/stop button, start/stop system (function), warning triangle, heat-insulating tinted glass. Ncjdpsykc T Hjfx Advjp

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Continuous feed machining, 4-sided edge routing possible, integrated vacuum pump, automatic positioning of suction cups, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, automatic central lubrication. ----- Technical Specifications ----- Min. workpiece length X: 200 mm, Min. workpiece width Y: 70 mm, Min. workpiece thickness: 8 mm, Max. workpiece length X: 3,200 mm, Max. workpiece width Y: 920 mm, Max. workpiece thickness: 70 mm, Machine control software: CAMOUS HOPS, Nedpfx Asyrp Srjdvocp Main spindle motor power: 6.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: HSK-F63, Drilling unit motor power: 1.7 kW, Drill spindle interface: M10, H7 fit 11 mm, Number of vertical drilling spindles: 13 pcs, Number of horizontal double drill spindles in X direction: 2 pcs, Number of horizontal double drill spindles in Y direction: 1 pc, Saw blade diameter (saw unit): 120 mm, Number of tools in changer: 6 pcs, Extraction port diameter: 2 x 120mm + 1 x 140 mm, Required air flow rate: 4,100 m³/h, Required static vacuum: 2,500 - 3,000 Pa, Required air velocity: 30 m/s, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer’s specifications - ready for immediate use

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Nodpfx Asw Sy T Hedvecp

Condition: used, mileage: 100 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 04/2024, loading space length: 3,350 mm, loading space width: 1,784 mm, loading space height: 1,786 mm, emission class: euro6, color: black, number of seats: 8, total length: 5,981 mm, total width: 2,059 mm, total height: 2,546 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 79223---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Bi-xenon headlights with static cornering lights, LED daytime running lights including automatic headlight range adjustment * Windows: side window, 2nd row, fixed, right including sliding door on the right * Heated rear window wiper including digital interior mirror with full-screen display * Automatic climate control - air conditioning front and rear including water heating at the rear * Navigation system - dynamic and cloud-based navigation with traffic information, lane recommendations and road map for Western Europe - Ford audio system with 12-inch multifunction display and Ford SYNC4 - Bluetooth - hands-free system with voice control - playing music with voice control - integration of storage media (USB, MP3 player) - FordPass Connect including WLAN hotspot - emergency call assistant - Ford Power-Up - Android Auto and Apple CarPlay * Seat package 4A: driver's seat adjustable in 4 ways - double passenger seat with storage compartment under individually raised seats. Seat cushions - Height-adjustable headrests - Tray integrated in the double passenger seat (foldable) - Seat heating for driver and passenger (outer seat) - Inside armrest for driver - Manual lumbar support (driver's seat) - Passenger and side airbags and head-shoulder airbags front - Seat cover: Partial leather upholstery * Auxiliary heating package 1: Auxiliary heating (fuel-operated auxiliary heating), programmable, including remote control - including cold start package (-29 degrees) * Technology package 13 (4x4): Heated windshield - Windshield wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (radar-based) - Lane assistant with fatigue warning and high beam assistant - Headlight assistant with day/night sensor - Cruise control, adaptive - Rear view camera - LED downlight - Fog lights - Electric exterior mirrors. adjustable, foldable and heated * Conversion: MobileFelx system with 10 grid rails - side windows 3rd row of seats left and right OTHER EQUIPMENT * Axle load increase - front to 1850 kg * Airbag driver's side * All-wheel drive * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Battery life, battery life programmed to 10 minutes * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode Ncedpfsq Dh Rzsx Advep * Double-wing rear door with 180° opening angle (without window) * Electric window lifter * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator * Lockable glove compartment with lid * Interior lighting with delay circuit with reading lights at the front * Fuel tank 70 l * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Particle filter: diesel particle filter * Wheels: light alloy wheels 6.5 J x 16 in 10-spoke design * Wheels: tire repair kit * Headlight dipped beam halogen headlights with daytime running lights * Sliding door entry light automatically when door is opened * Sliding door on the right * Mud flaps at the rear * Side protection strips * Power steering * Seat belts - seat belt tensioners and belt force limiters at the front * Rear bumper with integrated step * Las

Condition: new, 10x25m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 250sqm system platform Data : - Length : approx. 10m - Width : approx. 25m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 250 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.15m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 020 x C profile 4150 mm , sendzimir galvanized . - 004 x C profile 4250 mm , sendzimir galvanized . - 066 x S profile 4800 mm , sendzimir galvanized . - 021 x Support 3000 mm , RAL 7016 . - 004 x Strut brace 3049 mm , RAL7016 . - 0116 x Clamping plate 2400 x 1000 x 38 mm natural/white P6 . - 021 x Lining plates for supports . - 021 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 26.487 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing Ncjdpfxjywimze Advep - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (Standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x15m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 150sqm system platform Data : - Length : approx. 10m - Width : approx. 15m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 150 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, natural top, white bottom. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 12 x C profile 5000 mm , sendzimir galvanized . - 40 x S profile 4800 mm , sendzimir galvanized . - 12 x support 2500 mm , RAL 7016 . - 03 x dome strut 2517 mm , RAL7016 . - 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 12 x Lining plates for supports . - 12 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 18.198 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Ncsdpsywimnsfx Advep Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 100sqm, system platform Data : - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 13.167 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : Ncodeywimhspfx Advep On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x5m storage platform, load: 500kg/sqm lower edge: 3m, approx. 25sqm, system platform Data : - Length : approx. 5m - Width : approx. 5m - Lower edge of platform : approx. 3.00 m - Top edge of stage : approx. 3.38 m - Total area : approx. 25sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 02 x C profile 5000 mm , sendzimir galvanized . - 08 x S profile 4800 mm , sendzimir galvanized . - 04 x Support 3000 mm , RAL 7016 . - 04 x dome strut 3049 mm , RAL7016 . - 12 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 04 x Lining plates for supports . - 04 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 5.288 € net Ncjdeywimbepfx Advsp plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x5m storage platform, load: 500kg/sqm lower edge: 3m, approx. 25sqm, system platform Data : - Length : approx. 5m - Width : approx. 5m - Lower edge of platform : approx. 3.00 m - Top edge of stage : approx. 3.38 m - Total area : approx. 25sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 02 x C profile 5000 mm , sendzimir galvanized . - 08 x S profile 4800 mm , sendzimir galvanized . Nsdeywil Ropfx Advecp - 04 x Support 3000 mm , RAL 7016 . - 04 x dome strut 3049 mm , RAL7016 . - 12 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 04 x Lining plates for supports . - 04 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 5.288 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x20m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 200sqm system platform Data: - Length : approx. 10m - Width : approx. 20m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 200 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 20 x C profile 4000 mm , sendzimir galvanized . - 52 x S profile 4800 mm , sendzimir galvanized . - 18 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 18 x Lining plates for supports . - 18 x Set of dowels for supports . Price : 20.609 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Ncsdpeywil Djfx Advsp

Condition: new, Year of construction: 2021, Mesh shelf/support shelves for pallet racking Njdpfx Asywifwsdvjcp Data: - 3-part, galvanized, for 270 x 110 cm shelf ( 99 € net ) - 4-part, galvanized, for 360 x 110 cm shelf ( 132 € net ) - New from stock - Load capacity: 1000 kg per grid, with evenly distributed load -MULTIPLE AVAILABLE! Price: 99,00 € net + legally valid VAT. You will receive an invoice with VAT shown. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning and ordering to installation. Delivery is available on request at a reasonable price.

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Ncedpfx Adoyrhcpsvop Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: ready for operation (used), Year of construction: 2010, Technical Data Ncjdpfx Adjxzvnksvop Product Number: Twister AT Year of Manufacture: 2010 Height: 2900 mm Width: 1700 mm Length: 3100 mm Capacity: 2300 kg/h Maximum cube size: 115×115 mm Total Power: 7.5 kW Power Supply: Electric: 400V 50Hz 5N Main Material: Stainless steel, acid-resistant Weight: 1670 kg Purpose: Dicing, slicing into strips, slices (flakes), and shreds Cutting boneless meat, beef fillet, cold cuts, ham, bacon, lard, fish, as well as vegetables and fruits – for fresh and chilled products at +4°C – 2°C Intended for use in large meat processing plants General Description: Multiple grid types available Compact design Constructed from high-grade stainless steel The machine complies with the highest hygiene standards Components are easy and fast to disassemble The machine is equipped with a variety of grids and an extensive range of spare parts The machine is in perfect condition without any defects.

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, input current: 35 A, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 110 mm, workpiece weight (max.): 200 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: num, total height: 27,000 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 4,000 kg, table length: 3,000 mm, table width: 1,100 mm, year of last overhaul: 2024, Equipment: documentation/manual, Well-preserved CNC machining center with few operating hours. Milling unit 6.6 KW ISO 30 with 4-position tool changer. Milling unit 6.6 kW ISO 30 with MANUAL TOOL CHANGE. Drilling unit with 10+4 drills. Vacuum pump 100 m3. Automatic machine lubrication. Table 3000x1100 mm. Nedpfx Asyurwpsdvscp