Used Guide And Tips Up To 500 Mm Spindle Lathe for sale (99,241)

Condition: good (used), Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc. Nodpfx Aox Tn U Noa Dewb

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Nodpfx Ajvrcqdsa Dswb For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, functionality: fully functional, Schaublin 150 High-Precision Lathe with 2-Axis Digital Readout ND780 Nwsdpfx Aaewynlue Deb Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Distance between centres: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock taper: MK3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 holders >> Collet chuck system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centre points >> Operating manual About the machine: For sale is a Schaublin 150 High-Precision Lathe. The machine is operational, features rapid traverse, and is in good used condition. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg Nwsdpjvrckqjfx Aa Dob >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar Nwodpfov Tyzcex Aa Dob >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders Njdovv Etvjpfx Aa Dswb >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev Nodowvuf Topfx Aa Dowb >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing Nodpfjvambcsx Aa Djwb >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard Nwsdpfxjvrdlcs Aa Dob >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Nwjdpfx Aewrm Dtja Dob Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 Nwjdpfx Aswthbija Deb >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm Nwjdpfswag Stjx Aa Deb >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 1,800 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, total length: 12,000 mm, overall weight: 29,500 kg, Machine can be inspected under power Nwsdpfxswv S D He Aa Djb

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 555 mm, total height: 80 mm, total length: 1,450 mm, conveying length: 1,450 mm, construction width: 555 mm, construction height: 80 mm, empty load weight: 22 kg, TAF item number: 1000005918 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,450 x 555 x 80 Width incl. side panel in mm: 555 Side height in mm: 70 Nsdsyddu Eopfx Aa Dswb Conveyor length in mm: 1,450 Conveyor width in mm: 500 Conveyor height in mm: 80 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: spring axle Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Drive: gravity Net weight in kg: 22 Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Nwjdox Hggwopfx Aa Dsb Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Nwodpfjx Hgkcex Aa Djb Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Scale Make Massi Measuring length 500 mm Schnabelänge 150 mm Nedpfsdx D T Eox Aa Dowb GES. Length 670 mm

Condition: excellent (used), Surface plate Nsdpfxog Af U Ee Aa Djwb Space requirement : Width 600 mm depth 500 mm Height 90 mm

Condition: used, Micrometer hanger Mass 475 - 500 mm in wooden case Nedpsby Rggefx Aa Dowb

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Njdpfxsxzu Ips Aa Dewb

Condition: new, The Servoturn 500/2000, a remarkable addition to the category of Conventional Horizontal Lathes, excels within the Servo-conventional Lathes group. This KNUTH machine combines cutting-edge feed technology with robust mechanical engineering, featuring ball screw drives and electronic hand wheels on all axes, ensuring precision and efficiency typically found in modern CNC machines. Users will appreciate the ease of selecting feed and thread pitches electronically without the need for gear changes. The Servoturn boasts a heavy ribbed machine bed and high-quality servo drives, allowing for a stable and dynamic operation. With a turning diameter over the bed of 500 mm and a center width of 1,950 mm, it accommodates various machining tasks. Standard equipment includes a quick-change tool holder set, an electronic hand-wheel system, and a coolant system, further enhancing its versatility. If you’re ready to upgrade to a robust and precise machine, you can request a quote for the Servoturn 500/2000 in the Servo-conventional Lathes category today. Nedpsl Iy Sxefx Aa Djwb

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LZ280/3, turning diameter over cross slide: 190 mm, spindle bore: 43 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 670 mm, quill stroke: 90 mm, quill diameter: 45 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed spindle lathe with stepless speed control from 30–4000 rpm. The standard paint finish includes RAL 7035 (light gray) for the housing and RAL 7016 (anthracite gray) for the substructure, splash guard hood and chuck guard. Equipment & accessories: ✅ 3-axis position indicator with 6" color display ✅ Quick-change tool holder Multifix A including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & collet board K32 ✅ Electromechanical limit switch device for thread/feed ✅ Tool cabinet with telescopic extension including operating tools Additional equipment package (optional): ➕ Three-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Live center MK3 & drill bit holder ➕ 4 additional turning tool holders & 1 drill bit holder 📦 Delivery: ✔️ Disposable packaging & safe transport including insurance Nedpsv Dan Dsfx Aa Dswb Perfect for precise and demanding turning operations in industry and trade! 🚀

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Nodexz R Iljpfx Aa Dewb It is included barfeeder.

Condition: used, Year of construction: 2009, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: ABC123, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, overall weight: 15,000 kg, control cabinet width: 6,000 mm, control cabinet length: 400 mm, control cabinet height: 800 mm, For sale: professional Diosna DSP 300 AF industrial dough mixer, manufactured in Germany and in excellent working condition. This is a high-capacity mixer designed for industrial bakeries and large-scale dough production. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop Njdpex Ta U Usfx Aa Djwb • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: used, Year of construction: 2009, turning diameter over cross slide: 900 mm, turning length: 14,060 mm, turning diameter: 1,320 mm, spindle bore: 125 mm, travel distance X-axis: 690 mm, travel distance Z-axis: 14,060 mm, DAINICHI DLX 132×1400 Year 2009 Control: Fanuc-20iTB X: 690 mm, Z: 14,060 mm Swing over bed: 1,320 mm, swing over carriage: 900 mm Nwedex Tntfepfx Aa Dob Spindle bore: 125 mm 4 steady rests