Used Haas Laser for sale (250)

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s Hfsdpfx Adov N Di Ajwjb General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, Year of construction: 2002, We offer you a chipper from the renowned Haas company - RESERVATION TYPE HTH 300 x 650 L7 WT Year 2002 Main engine 160 KW, 1400 rpm Electrical cabinets Documentation - RESERVATION Optionally, for an additional fee, a set of feeders: Vibrating chute in front of the chipper, length 6.0 m, internal width of the vibrating chute 65 cm Feeder from under the chipper, horizontal length 6 m, slant 8.5 m at an angle of 45 degrees Detector, metal detector Gooseneck feeder, length approx. 8 m, carrier length 80 cm Carrier length 22.50 m The whole as in the pictures Hsdsir Iqgspfx Adwofb

Condition: used, Year of construction: 2012, functionality: unexamined, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, Auction: Factory Closure Roschmann, Gersthofen (Augsburg) Bid now – sale to the highest bidder. Lot 2910003: consisting of 1 used vertical CNC machining center from HAAS, model VM-6, in good condition. Designed for precise and efficient metalworking in mold making, tool making, and general machining applications. Features: 3-axis vertical machining center (X/Y/Z). Travel range: X = 1,626 mm, Y = 813 mm, Z = 762 mm. Spindle: BT40 taper, up to 12,000 rpm. Motor power: 22.4 kW (30 HP). Tool magazine: 30+1 positions, automatic tool changer. Table size: approx. 1,626 x 711 mm, max. load 1,814 kg. Haas CNC control with display and USB port. Chip conveyor, coolant system included. Electrical: 360–480 V, 50/60 Hz, 3-phase. Machine dimensions: approx. 4,750 x 3,250 x 3,100 mm. Weight: approx. 8,000–11,000 kg. Hfsdpfx Aox N Ngrodwjb

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, coolant supply: 21 bar, spindle motor power: 23 W, Equipment: chip conveyor, documentation/manual, For sale: 2 CNC milling machines as a package deal!!! 1 x Haas VF2SS, year 12/2014, Super-Speed machining center SK 40 inline spindle! The VF 2 SS is under power for inspection and fully operational. The machine is equipped with a programmable air cylinder for dry machining, coolant ring + through-spindle coolant (IKZ) with 21 bar, and an additional coolant filtration system. Tool changer with 24 stations! Prepared for 4th axis: Drive and wiring for brushless rotary tables. Automatic air gun Programmable coolant nozzle Spiral chip conveyor Hodpfex Uprfox Adwefb 1 x Mikron VCE 1000, year 1997, with TOOL MEASUREMENT!!! Currently, the Mikron's vector drive is defective but can be repaired for approx. €1,300 (we will provide the address for repairs). Both machines are sold only as a package and will be loaded FREE OF CHARGE by us onto a truck provided by you at the listed price! This means NO additional loading or dismantling costs for you! Availability of both machines: immediate

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Hodpfjv Igghox Adwefb Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank Hjdsx R A Rtepfx Adwofb – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Condition: good (used), Year of construction: 2015, 1 used portal machining center Manufacturer: Haas Model: Gr 510 Year of manufacture: 2015 Technical details X-axis: 3073 mm Y-axis: 1549 mm Z-axis: 279 mm Control: HAAS Table size: 3099 x 1346 mm Total power requirement: 11.2 kW Machine weight approx.: 9.2 t Shipping dimensions: 5.5 x 2.9 x 2.9 (3.2) m Space requirements approx.: 6 x 3 x 3 m Hodpoxzifvsfx Adwjfb Additional information 4th axis NC rotary table with tailstock and swiveling bridge

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Tools Slots in storage 15 Max weight 5.4 Max tool diameter 189 Hsdpfx Aex D N I Nsdwefb This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Application Types Milling

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available from Q2 / 2026. Designed for resharpening hobbing cutters, worm wheel cutters, cutting rotors, notching cutters, industrial knives, circular knives, shaper wheels, skiving tools, deep hole drills, and other workpieces/components. Control: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing device): 360° SK50 C-axis (rotary table): 270° X3-axis electrically operated with tailstock Grinding spindle: HSK80 Dressing unit Tool changer: 10-position magazine disc Coolant system: Turbo Separator Extraction unit: LTA Hjdpfx Adjx Tr H Newofb CO2 extinguishing system Additional accessories available ex works Custom software solutions available on request Pre-acceptance at factory and commissioning, training, and final acceptance at customer site Financing/leasing options available Modification requests possible

Condition: used, Year of construction: 2022, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, overall weight: 2,087 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used HAAS TL-2 horizontal machining center, year of manufacture 2022. Hsdox Tgx Hepfx Adwjfb Serial number: 3124664 Manufacture date: 06/2022 Voltage: 400 V Phases: 3 Frequency: 50/60 Hz Rated current: 13 A Maximum current: 10 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Hjdpfjv Igg Ijx Adwsfb Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: used, Year of construction: 2005, Technical details: Hjdpfxjx Iwr To Adwjfb x-travel: 750 mm y-travel: 406 mm z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. *

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1159547, travel distance X-axis: 3,683 mm, travel distance Y-axis: 2,159 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Machining center with extended Z-axis and magazine size as well as steel table and other additional equipment Hodpfx Adevpf Imjwefb No reserve price - guaranteed sale at the highest bid! Bidding obliges you to pick up the machine on time by January 31, 2025! TECHNICAL DETAILS X-axis: 3,683 mm Y-axis: 2,159 mm Z-axis: 610 mm - extended Distance spindle nose - machine table (max.): 343 mm Spindle nose to table (min.): 64 mm Spindle Max. rated power: 11.2 kW Max. speed: 8,100 rpm Max. torque: 65.0 Nm at 1,500 rpm Drive system: Direct Speed, Belt Drive Cone: CT or BT 40 Table Length: 3,708 mm Width: 1,829 mm Thickness: 25 mm Material: Steel - extended! Max. load capacity on table (evenly distributed): 2,722 kg Space between columns: 2,184 mm Hole pitch: M12 thread Feed rates Max. feed for cutting: 20.3 m/min Rapid traverse X: 20.3 m/min Rapid traverse Y: 53.3 m/min Rapid traverse Z: 27.9 m/min Axis drives Max. thrust force X: 11,210 N Max. thrust force Y: 4,537 N Max. thrust force Z: 9,119 N Tool changer Type: Carousel Load capacity: 20 tools - extended Max. tool diameter (full): 89 mm Max. tool weight: 5.4 kg MACHINE DETAILS Coolant tank capacity: 360 l Compressed air connection: 113 l/min at 6.9 bar Min. air pressure: 5.5 bar Dimensions - Shipping Pallet: 575 cm x 348 cm x 295 cm Export box: 575 cm x 348 cm x 303 cm Weight: 10,887 kg EQUIPMENT - WIPS-R_GR-712 Intuitive wireless measuring probe system, Renishaw, including macros - CS-GR_GR-712 Cooling system with 360 liter coolant tank and 0.6 kV pump - HSM_GR-712 High-speed machining - C_GR-712 Portable control panel RTAP-3_GR-712 Cable drilling

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,717 h, General Data Measurements width 2387 mm Measurements depth 3978 mm Measurements height 2565 mm Machine weight 8200 kg Control Unit Brand HAAS Main Drive Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Table Table load 300 kg Media Chip conveyor Yes Additional Equipment Wireless Intuitive Probing System Through-Spindle Coolant This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information. Hsdpfx Adox Hbmrewsfb Application Types Milling

Condition: excellent (used), X-axis travel: approx. 508 mm (20") Y-axis travel: approx. 508 mm (20") Z-axis travel: approx. 508 mm (20") Work envelope: Cube-style 20" × 20" × 20" Pallet & Rotary System Pallet size: 300 × 300 mm Automatic Pallet Changer: Dual pallet system B-axis: 360° rotary indexing Spindle Spindle type: Inline Direct Drive Spindle Maximum speed: 12,000 RPM High accuracy, low vibration, and reduced maintenance Coolant System TSC – Through Spindle Coolant Ideal for deep drilling Excellent chip evacuation Tooling & Equipment Automatic tool changer REGO-FIX high-precision tool holders visible Machine prepared for serial and high-efficiency production Key Options 12,000 RPM spindle Inline direct-drive spindle Through Spindle Coolant (TSC) Automatic Pallet Changer Condition Machine is in good working condition Hfsdpfjx Ttz Isx Adwsb Installed in an active production environment Well maintained and clean overall condition Additional Information The Haas EC-300 is a robust and reliable horizontal machining center, well suited for automotive, subcontracting, and serial production applications. This configuration, equipped with 12,000 RPM spindle, TSC, and pallet changer, is considered a highly desirable option package.

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 680 kg Movement X-Axis Movement 304 mm Z-Axis Movement 305 mm Hfsdpfx Adox D Ip Sjwsb Y-Axis Movement 254 mm Main Drive Number of axis 5 Spindle Speed 30000 RPM Spindle motor power 3.7 kW Table Table load 68 kg This 5-axis HAAS OM-2A was manufactured in 2013 and features a 3+2 configuration, with a spindle speed of 30,000 RPM and a motor power of 3.7 kW. It includes a 20-tool automatic tool changer and can handle a maximum table load of 68 kg. If you are looking to get high-quality milling capabilities, consider the HAAS OM-2A machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 2 Workpiece Workpiece drm over bed 806 mm Workpiece drm over support 527 mm Media Hfsdpfxox D Hm Ns Adwjb Chip conveyor Yes This HAAS ST-30 was manufactured in 2010. A robust horizontal turning machine featuring a swing over bed of 806 mm, maximum cutting diameter of 533 mm, and a bar capacity of 76 mm. It includes a 254 mm 3-jaw chuck, tailstock, coolant system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 4944 kg Control Unit Brand HAAS Main Drive Spindle speed range 3400 rpm Spindle motor power 22.4 kW Number of axis 2 Movement X-Axis Movement 239 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 826 mm Z-Axis Rapid Traverse 24 m/min Hsdex D El Rspfx Adwsfb This HAAS ST-30 was manufactured in 2020. A robust horizontal turning machine featuring a chuck size of 254 mm, max cutting diameter of 381 mm, and bar capacity of 76 mm. It supports a spindle speed up to 3400 rpm with a power of 22.4 kW. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Hfjdpfox Enh Tox Adwjb This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 2134 mm Z-Axis Movement 762 mm Y-Axis Movement 813 mm Hedox Imrpjpfx Adwofb This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 238 h, General Data Machine weight 7212 kg Control Unit Brand HAAS Main Drive Spindle speed range 7500 Number of axis 3 Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Hfedpfx Ajx D Itqsdwjb Table Outer length 1372 mm Outer width 610 mm Tools Slots in storage 30+1 This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Hjdpfxex D Iy Ds Adwefb Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, Control Unit Brand HAAS Model NGC Hfjdpsx D Hpdjfx Adwjb Main Drive Number of axis 3 Spindle Speed 8100 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Table Table load 1588 kg Tools Max tool diameter 89 mm Slots in storage 20 Media Internal cooling yes This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Number of axis 3 Movement X-Axis Movement 706 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm Workpiece Workpiece weight 1361 kg This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Hfodpfxsx D Hpkj Adwjb Application Types Milling

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Hfedsx D Nxhopfx Adwob Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning