Used Haas Multigrind for sale (254)

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Itedpfx Aasxyinnonor Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Iodpfjxva Ahsx Aanjtr Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min Iedpfx Aaexyafwonotr weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: like new (used), Year of construction: 2016, travel distance X-axis: 1,575 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table width: 584 mm, table length: 1,524 mm, rotational speed (max.): 8,100 rpm, Machine in very good condition, can be tested in the workshop, sold for business closure. Iedjtd Eypopfx Aanstr

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Itjdpfx Aaex D D N Ionor Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,118 h, spindle motor power: 22 W, spindle nose: BT40, number of slots in tool magazine: 40, Through-spindle coolant 20 bar Filtration Belt chip conveyor Iedpfx Aox I Nutjanjtr Workpiece probe Tool probe Robot interface preparation Automatic (side) door Portable handwheel Washing gun High-speed machining

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1179736, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, faceplate diameter: 500 mm, Submission of a bid obligates the buyer to collect the item on time by the end of 2025! TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 508 mm Travel Z-axis: 508 mm Swivel range: +120 to -35 degrees Rotational range: 360 degrees Faceplate diameter: 500 mm MACHINE DETAILS Electrical data Voltage: 440 V Phases: 3 Frequency: 50/60 Hz Itedpfjx Agv Iox Aansr EQUIPMENT Two-axis rotary table Standard T-slots Precision alignment bore

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3108833, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Hydrafeed MSV 65 magazine barfeed Parts catcher Hydraulic tailstock Swarf conveyor Assorted tool holders Iedpsx Ig Auofx Aanetr Interlocked guarding Automatic lubrication system Coolant system

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running we have also got a tailstock if required Itjdpfx Aajq Rciljnjr

Condition: good (used), Year of construction: 2017, Machine has 1,350 spindle hours and 7,000 power-on hours, Haas VF 3 with 4 axes, Year of manufacture: 2017, Control: Haas, Travel X/Y/Z: 1016/508/635 mm, 24-position tool changer, Taper: SK 40, Table size: 1219 x 457 mm, Spindle speed up to 8,100 rpm, 4th axis HRT 310 with tailstock, Iodpox Ezk Uofx Aanstr Max. table load: 1,588 kg, 3D measuring probe, Renishaw probe,

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 16914 kg Measurements height 3590 mm Dimensions Machine Length 7320 mm Table Table load 1814 kg Control Unit Brand HAAS Main Drive Number of axis 3 Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 3048 mm Z-Axis Movement 762 mm Y-Axis Movement 1016 mm Tools Max weight 13.6 kg Iodpfxex D Imqs Aanjtr This 3-axis HAAS VF 11/50 was manufactured in 2011. It features a robust CNC control, a large table surface of 3048 × 711 mm, and can handle a maximum load of 1814 kg. With X, Y, Z travels of 3048 mm, 1016 mm, and 762 mm respectively, it offers extensive working range. The spindle can reach up to 7500 rpm, and it includes a 30+1 random tool changer. Consider the opportunity to buy this HAAS VF 11/50 vertical machining centre. Contact us for more information. Application Types Milling

Condition: like new (used), Dehairing machine Itsdoxtpm Dopfx Aanor Manufacturer: HAAS Stainless steel Engine: 2.2kW

Condition: used, HAAS VF-2 is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 914×356 mm; travels X 750 mm, Y 406 mm, Z 508 mm; table load max. 680 kg. Tool changer 20 tools, spindle nose CT40, stepless spindle up to 8100 rpm, spindle power 22.4 kW, rapid traverse 25.4 m/min; machine weight approx. 3447 kg; overall dims L2464×W2337×H2578 mm. Accessories: set of toolholders, preparation for coolant device, Renishaw probe, lamp, oil mist extractor, rinsing guns. Enables tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, toolmaking. Itjdpjxx U Dljfx Aansr

Condition: like new (used), Year of construction: 2018, operating hours: 502 h, functionality: fully functional, machine/vehicle number: 1154161, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, rapid traverse Z-axis: 61 m/min, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, feed rate X-axis: 31 m/min, feed rate Y-axis: 31 m/min, feed rate Z-axis: 31 m/min, nominal power (apparent): 20 kVA, torque: 46 Nm, controller manufacturer: HAAS, controller model: HAAS NGC (Next Generation Control), workpiece length (max.): 660 mm, workpiece width (max.): 381 mm, workpiece height (max.): 394 mm, workpiece weight (max.): 113 kg, total height: 2,489 mm, total length: 1,626 mm, total width: 2,083 mm, table width: 381 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 2,722 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 502 h, coolant supply: 20 bar, distance table to spindle center: 495 mm, spindle motor power: 11,200 W, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 30 mm, tool length: 127 mm, tool diameter: 76 mm, tool weight: 1,800 g, input voltage: 400 V, type of input current: three-phase, HAAS DT-1 High-Speed Drilling/Tapping Center - Excellent Condition - Only 502 Spindle Hours Exceptionally well-maintained HAAS DT-1 vertical machining center with very low hours. This compact, high-speed machine is ideal for drilling, tapping, and light milling operations in aluminum, steel, and other materials. Full details are available (including all invoices) through a website build for this machine. Machine History: - Built: August 2018 - 2018-2021: Demo machine at Landré (official HAAS distributor Netherlands) - October 2021: Purchased by IMBU BV - 2021-2025: Used exclusively for prototyping - never production work - December 2025: Full service by Landré (service report available) Condition: Outstanding condition for its age. Only 502 spindle hours and 1,764 power-on hours. The machine has been carefully maintained and used only for prototype development, resulting in minimal wear. Installed Options: - 15,000 RPM spindle (11.2 kW, BT-30) - Through Spindle Coolant (TSC) 20 bar with 25 micron fine filter - Renishaw Wireless Probing System (WIPS-R) for tool and workpiece measurement - 4th axis interface with wiring (ready for rotary table) - 5th axis interface with wiring - High Speed Machining (HSM) - 80 block look-ahead - Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) - Programmable coolant nozzle (34 positions) - Automatic chip auger Software Options: Macros, Rotation and Scaling, Rigid Tapping, M19 Spindle Orient, VPS Editing, Media Display, Wireless Networking, Compensation Tables, 1GB Max Memory Technical Specifications: - Travel: X=508mm, Y=406mm, Z=394mm - Rapid traverse: 61 m/min (all axes) - Table size: 660 x 381 mm - Table load: 113 kg - Tool changer: 20+1 side-mount - Spindle nose to table: 102-495 mm - Coolant tank: 208 liters - Machine weight: 2,722 kg - Dimensions (L x W x H): 1626 x 2083 x 2489 mm - Power: 400V 3-phase Machine Data (from controller): - Power-on hours: 1,764 - Spindle hours: 502 - Feed cutting time: 337 hours - Tool changes: 13,803 Isdjx E Au Uepfx Aanetr - Programs completed: 3,896 Included: - Complete machine documentation - All original invoices (machine, tooling, accessories) - Landré service report December 2025 - Renishaw wireless probing system (tool probe + workpiece probe) ALSO INCLUDED: Extensive set BT-30 toolholders (list attached), Ceratizit cutting tools, and Lang Quick-Point clamping system (list attached). Total investment approx. €25,000. Location: Netherlands Reason for sale: Company restructuring All documentation available on website. Inspection welcome by appointment.

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, Isdpfx Ajxugtksanstr 3,200rpm spindle speed, 102mm bar capacity, 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Ijdexg Nd Nepfx Aanotr Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Rigid Tapping Equipment and features: Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Year of construction: 2017, condition: ready for operation (used), Main Drive Spindle Speed 4800 RPM Spindle motor power 22.4 kW Number of axis 3 Movement Y-Axis Movement 50.8 mm This 3-axis HAAS DS-30SSY was manufactured in 2017. It features a dual spindle system with vector-driven main and secondary spindles, both offering 4,800 rpm. The turret accommodates 24 hybrid stations for versatile tooling options. It includes a high-pressure coolant system, belt-type chip conveyor, and an advanced control system with a 15" color monitor. If you are looking to get high-quality turning capabilities consider the HAAS DS-30SSY machine we have for sale. Contact us for more information. Application Types Itodpsx D D Rfsfx Aanor Turning

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1056789, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 18 m/min, workpiece weight (max.): 1,500 kg, total height: 3,600 mm, total length: 2,400 mm, total width: 2,600 mm, table width: 457 mm, table length: 1,219 mm, table load: 1,500 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, type of input current: three-phase, coolant supply through spindle: 20 bar, tool type: SK 40, Equipment: chip conveyor, documentation/manual, lighting, This CNC machine is a Haas VF3(BHE) from 2007. It features a side-mount tool changer and a double-arm gripper, enabling automatic tool changes from 24+1 tools. Both the tool changer and spindle accept SK40 tool holders. A wired handwheel is located on the left side of the control panel. The 4th axis is pre-configured. The front and side safety viewing windows have been replaced. The coolant has been drained, and the tank has been cleaned. An additional 25-micron coolant filter protects the spindle's internal coolant system via the tool against contaminants and chips. Training materials and a manual are included, as well as a cable for communication with a computer (see photos). The machine is powered on and can be inspected and demonstrated by appointment at any time. We are happy to answer any further questions you may have about the CNC machine. Organizing transport at the buyer’s expense is possible by arrangement. Iodpfex Aidhox Aanotr Sale on behalf of a customer!

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Ijdpfexwyuasx Aanstr Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 3400 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 239 mm Z-Axis Movement 826 mm Y-Axis Movement 50.8 mm Iedpfox D Iixox Aanotr This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter Itjdpjv Tah Asfx Aansr

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, Ijdpfxskticxe Aanotr max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: excellent (used), Year of construction: 2020, Swing 533mm, 298mm max. machining diameter, 572mm cutting length, 3400rpm spindle, Itjdpfx Aaevygv Hsnsr 76mm bar capacity, 12 station turret, Y axis -/+ 50.8mm, 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock,

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, Ijdexpw Rvjpfx Aanotr chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe Isdpfx Aaep H Tb Nonotr