Used Haas for sale (239)

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Djdpexrf Stefx Addola Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Dodpeiypzdsfx Addsla Ready for delivery

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Dsdpfjv Sut Rex Addela

Condition: good (used), Year of construction: 2014, HAAS VF1 (2014) • Manufacturer: HAAS • Model: VF-1 • Year of Manufacture: 2014 • Machine Type: Vertical Machining Center Technical Data: Djdpfxsv Iywms Addsla • Travel (X / Y / Z): 508 x 406 x 508 mm (20” x 16” x 20”) • Table Size: 660 x 356 mm (26” x 14”) • Maximum Table Load: 1,360 kg (3,000 lbs) • Spindle Speed: Up to 8,100 RPM (optional 10,000 or 15,000 RPM) • Spindle Taper: 40 Taper • Spindle Power: 22.4 kW (30 HP) Vector Drive • Tool Changer Capacity: 20+1 (Carousel Type) • Rapid Traverse Rates: 25.4 m/min (1,000 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • Automatic Tool Changer: Yes • Coolant System: Standard Flood Coolant System • Control System: Haas CNC Control • Machine Weight: Approx. 3,630 kg (8,000 lbs)

Condition: excellent (used), Year of construction: 2012, Haas Vf4SS Year of manufacture 2012 12,000 rpm BT 40 40+1 tool changer Dlodpfx Asxnpuwoddoa With 4th axis Renishaw Very good condition! Videos available.

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Dodpfx Asxg Riasddjla

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Dedpfx Aetq T Tkeddsla Width: 240 Length: 340 Height: 250

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE Dsdjxlk I Tepfx Addsla - Spindle nose : A2-6" - Spindle power : 22 [kW] - Spindle speeds : 3400 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 298 [mm] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle speeds : 6000 [rpm] - Rapid traverse rate : 10 [mm/min] TURRET 1 - Number of positions : 12 - X/Z stroke : 213/572 [mm] - Tool type : BMT65 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3630/2290 [mm] - Machine height : 2340 [mm] - Machine weight : 4536 [kg] MACHINE HOURS - Number of hours under power : 622 [h] - Number of working hours : 137 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Coolant tank - Chips conveyor - Tool probe - Electric transformer - Number of fixed tool holders : 9 - Chuck 3 jaws : 2

Condition: ready for operation (used), Year of construction: 2007, Haas VF-4SS HE Milling Machine with HRT310 Year of manufacture: 2007 X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1,321 x 457 mm Maximum table load: 794 kg Spindle taper: ISO SK 40 Spindle: 12,000 rpm with 22.4 kW Through-spindle coolant (IKZ): 21 bar Programmable coolant nozzle Additional filter Chip conveyor spiral 24+1 tool changer High-speed machining Portable control panel VQC-V programming support G/M codes RS-232 and USB interfaces Coordinate system / scaling User-defined macros 4th axis preparation HRT 310 CNCB HTS9 manual tailstock Dledpfx Adsxit Nuodja Machine weight approx. 6.3 t The machine can be inspected under power by arrangement near Bielefeld. Loading can be provided. Buyer is responsible for transport. Technical data, accessories, and machine descriptions are non-binding.

Condition: excellent (used), Year of construction: 2022, Technical Specification of HAAS UMC-750 (2022) • Manufacturer: HAAS • Model: UMC-750 • Year of Manufacture: 2022 • Machine Type: 5-Axis Universal Machining Center Technical Data: • Travel (X / Y / Z): 762 x 508 x 508 mm (30” x 20” x 20”) • Table Size: 630 mm diameter (24.8”) • Maximum Table Load: 300 kg (660 lbs) • Spindle Speed: 12,000 RPM (optional 15,000 RPM) • Spindle Taper: 40 Taper (inline direct-drive) • Spindle Power: 22.4 kW (30 HP) vector drive • Tool Changer Capacity: 30+1 (optional 50+1) • Rapid Traverse Rates: 30.5 m/min (1,200 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • B-Axis Travel (Tilt): +110° to -35° • C-Axis Travel (Rotation): 360° continuous • Automatic Tool Changer: Yes • Coolant System: Standard flood coolant with optional Through-Spindle Coolant (TSC) • Chip Management: Programmable chip auger or conveyor • Control System: Haas CNC Control with Wi-Fi and Ethernet connectivity Djdpfx Adsv Izg Nedsla • Machine Weight: Approx. 6,350 kg (14,000 lbs)• 25 micron filter • Chip conveyor belt • Spindle center coolant pressure 300 psi • Wireless tool and workpiece probe • Side tool changer, ISO 40 taper, 30+1 tools • Synchronized threading • Rotary scale

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor Dodpfx Aewvgbyeddola - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 15,200 m/min, rapid traverse Y-axis: 15,200 m/min, rapid traverse Z-axis: 15,200 m/min, tool length: 406 mm, tool diameter: 127 mm, tool weight: 5,500 g, General Technical Data Sheet Brand: HAAS Model: VF-6B/40HE Category: Vertical Machining Centres Year of manufacture: 2004 CNC Control: HAAS CNC Machine weight: 10,116 kg Machine Dimensions: Length: 4,900 mm Width: 2,800 mm Height: 3,300 mm Spindle Taper size: ISO-40 Spindle speed: 10,000 rpm Spindle motor power: 15 kW Working Capacity X-axis travel: 1,626 mm Y-axis travel: 813 mm Z-axis travel: 762 mm Distance between spindle nose and table surface: 102 – 864 mm Table Table dimensions: 1,626 x 711 mm Maximum table load: 1,814 kg Feed Rates Rapid traverse (X / Y / Z): 15,200 mm/min Working feed (X / Y / Z): 12,700 mm/min Tool Changer Tool taper: DIN 69871-A40 Dedsxfavyspfx Addjla Tool holder shank: DIN 69872-A40 Tool magazine capacity: 24 positions Max tool diameter (adjacent tools / empty pockets): Ø67 mm / Ø127 mm Max tool length: 406 mm Max tool weight: 5.5 kg Additional Equipment Contact tool setter installed on the table with RENISHAW workpiece probe High-pressure coolant pump through spindle Coolant catch tank with wash-down pump Screw-type chip conveyor Manuals, electrical diagrams, and CE Declaration included

Condition: used, Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Dlodpfx Asg Swz Heddea Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 4,000 rpm, Haas TM-3HE CNC Milling Machine in great working order. The machine is currently in storage but can be powered up and demonstrated as required. The tooling shown in the pictures is included in the sale. Dlsdpfx Adjxnmzujdoa

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,500 kg, table width: 1,219 mm, table length: 457 mm, TECHNICAL DETAILS Travel Distances Dsdoxgpp Sopfx Addola X-Axis: 1,016 mm Y-Axis: 508 mm Z-Axis: 635 mm Workpiece Table size: 1,219 mm x 457 mm Maximum workpiece weight: 1,500 kg Spindle Spindle taper: BT-40 Spindle speed: 7,500 rpm Spindle motor: 14.7 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,450 x 2,850 mm Weight: 5,600 kg EQUIPMENT 20-position tool changer Programmable coolant nozzle Through-spindle coolant supply Low voltage lighting Chip conveyor

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR Dodpfx Adsxb D Aiedjla 4/5 AXIS TABLE

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm Dljdpfx Ajwvf Thoddoa X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 4,500 h, Haas VF-6B/40HE Machining Center Year of manufacture 2005 X-axis 1,626 mm Y-axis 813 mm Z-axis 762 mm Table size 1,626 x 711 mm Max. table load 1,814 kg Spindle mount ISO SK 40 Spindle 10,000 rpm with 22.4 kW and 2-stage gearbox Internal coolant supply 21 bar Dlodpfov Nzxnox Addsa Air nozzle for dry machining Additional filter Spiral chip conveyor 40+1 tool changer Prepared for the fourth axis Machine weight approx. 10 t The machine can be inspected under tension near Heilbronn by appointment. The buyer is responsible for transport and loading. Technical specifications, accessories, and descriptions of the machine are non-binding.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Dljdpfevwz T Ujx Addsa

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,982 h, functionality: fully functional, Haas VF-8/40, year of manufacture 2008 The machine was purchased in 2008, is fully functional, and can still be used as normal. All tools and accessories are included. Further technical details can be found in the attached images. Viewings can be arranged by appointment if interested. Dodpjxcvz Hefx Addsla

Condition: used, Year of construction: 2022, X/Y/Z - 610/406/406 mm B-axis 120-35- deg. C-axis rotation 360 deg. (max. part swing 457 mm) Spindle speeds 15.000 rpm Spindle power 22,4 Kw Spindel taper BT 40 15.000 o/m, inline direct-drive 22,4kW Side mounted toolchanger 30 + 1, BT 40 Dodpfx Ajv Ina Nsddsla 21 bars internal coolant through spindle Chip conveyor Automatic tool & part measuring Automatic calibration Dynamic Work Offsets Ethernet Interface Haas Connect Media Display 1 GB memory 208 L. coolant system Fine filter for coolant Remote Jog hand wheel Syncronized threading Programmable coolant nozzle High Speed Machining Prepared for air up through table Wifi camera Full 5-axis Equipped with: Vacuum table Large tool package (see photos) ONLY BEEN WORKING FOR APPROX 1100 HOURS - APPEARS LIKE BRAND NEW

Condition: good (used), Vertical milling machine Toolroom type Haas TM-1P, year 2020 Dlsdpow Snzrsfx Addja

Condition: like new (used), Year of construction: 2022, Controller HAAS (LCD screen, 1 Gb memory, touch screen, WIFI) Table size D400 mm Table load 227 kg No of T slots 5 X travel 610 mm Y travel 406 mm Z travel 406 mm B axis tilting +120 / - 35 degree C axis rotation 0 - 360 degree Distance between the spindle and table surface 102 - 508 mm Spindle speed 15000 rpm Dodpfolaxu Djx Addjla Spindle power 22,4 kW ATC magazin 50+1-fold Toolholder HSK-A63 Rapid speed X/Y/Z 30,5 m/min Feedrate 16,5 m/min Weight 5400 kgs Machine dimensionen LxWxH 2900 x 2280 x 2520 mm Features, accessories - CTS 69 bar - Coolant unit - Extra filter system on coolant unit - Dinamical zero point shift / toolpoint programming - Intelligent over voltage protection - Ethernet interface - HAAS Connect, remote control - HAAS Drop (Wifi Data transfer) - High Speed machining - Media show during working by M130 - Rigid tapping - Protection from over voltage - Chip conveyor - Programmable coolant nozzles - Air through the spindle Two idencital machines are for sale. Ready to buy immediately.

Condition: good (used), Year of construction: 1999, Machine is in good condition. Dledpfx Adowx Rafodea X 750 mm Y 400 mm Z 500 mm 10.000 rpm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Dlsdpsw Uz Ansfx Addsa Brand: Haas Equipment: Tool holder SK50 Tool positions: 30+1 Year of manufacture: 03/2008 Weight: 13,600 kg Additional information: Machine has been newly painted Price on request