Used Hall Spotlight 400W for sale (1,289)

Year of construction: 1984, condition: excellent (used), machine/vehicle number: RS118/2, Technical data: 1 Zasche / steel ZHD 2000 pillar jib crane NL 2000 KG Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.5m, UK boom: approx. 2.45m Reach: approx. 3m, hook height: approx. 2.45m Total weight approx. 1000 kg with steel chain hoist 2000KG Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping by freight forwarder or collection by appointment Bedpfx Abevzkw Dszsww

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD1093/25, Technical data: 1 Vetter / Donati pillar jib crane NL 2000KG with chain hoist Type M20-4.5 Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.7m Bwjdpfx Absvv Nr Nszew UK boom: approx. 3.28m Reach: approx. 4.5m Hook height: approx. 2.8m Total weight approx. 2000Kg including dowel plate 1570mm with Donati chain hoist NL 2000Kg with trolley drive Swivel range 360°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD750/9, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Type AS2.5-3 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.95m Bwodovv Npzepfx Abzsw UK boom: approx. 3.7m Reach: approx. 3.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 1983, condition: excellent (used), machine/vehicle number: WR10, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with Demag PK1 chain hoist Payload at full radius 250KG / 0.25 tonne payload Bwsdpfort R Hnox Abzsw Height: approx. 3.3m UK boom: approx. 2.8m Radiance: 2.7m Hook height: approx. 2.4m Complete weight approx. 600KG incl. dowel plate 80x80cm with 250KG Demag chain hoist incl. bolt, cable carrier, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only after appointment

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Bodpfxsvz Euke Abzjww Weight 800 kg Total power requirement 3 kw

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Bjdsw A Ng Espfx Abzjww Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: good (used), Year of construction: 1996, Steel hall 3,050 m², year of construction 1996, former tennis hall – used: Price ex location: €89,000 (net)! Manufacturer: unknown Year of manufacture: 1996 Dimensions approx.: Width: 40.87 m Length: 74.70 m Eave heights: 3.48 m + 4.57 m Side height: 6.50 m clear height over a width of 27.00 m (see drawings) Bwedpjxr Akmofx Abzow Spacing: 7.77 m = 9 bays, 5.40 m = 1 bay (axes 1 to 11) Ridge height: 10.00 m Comprising: Painted steel structure Galvanized roof purlins and wall girts Wall cladding: sandwich panels, core thickness 60 mm Axis 11 is open Windows and doors Roof drainage Roof covering: trapezoidal sheet metal with loose insulation Heating Condition: good, inspection recommended! Condition of the steel structure: very good (previously used as a tennis hall) Available: immediately Location: Berlin

Condition: used, mileage: 3,62,648 km, power: 257 kW (349.42 HP), first registration: 01/2006, overall weight: 26,000 kg, fuel type: gasoline, color: orange, axle configuration: 3 axles, gearing type: automatic, emission class: euro4, loading space volume: 24 m³, total width: 2,500 mm, total height: 3,690 mm, Equipment: ABS, air conditioning, HALLER garbage collection body, type: M24X2EC, capacity approx. 24 cbm, ABS, ASR, differential lock rear axle, engine brake, cruise control, starting aid, analog tachograph, air conditioning, reversing camera with monitor in the driver's cab, heated and electrically adjustable outside mirrors, electric window lifter driver and passenger door, roof hatch, standard driver's suspension seat, 4 seats, fog lights, rotating beacon, battery isolator, central lubrication system, air suspension with lifting and lowering device rear axle, trailing-steered lift axle, vehicle can be covered with advertising and/or labeled Bsdpfjvnn Tcex Abzjww Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: used, capacity 5 t Bwedpjkyzbhofx Abzsw condition gut amount 1 auf Lager +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Used warehouse - Dimensions: L 10,000 mm x W 5,000 mm x H 4,500 mm - Steel/cold hall - Clad with steel sheeting - Gable end with double-leaf door - Without structural calculations Bsdpfx Ajxrpiiebzeww For self-dismantling or dismantling service can be offered.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Bwedpfxovz Euds Abzew Weight 665 kg Total power requirement 3 kw

Year of construction: 2014, condition: ready for operation (used), Movement X-Axis Movement 1200 mm Y-Axis Movement 730 mm Z-Axis Movement 650 mm Bwedpfxexuk U Se Abzow This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger turret punch press. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Bwodpfxsxr Nvio Abzsw

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Bwedjw Ec Rijpfx Abzow Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: used, Year of construction: 2005, Weight 350 kg Dimensions (L/W/H) 1930,0 × 1850,0 × 2490,0 mm x-axis 610 mm y-travel 305 mm Bwedpfjwg Huuex Abzjw z-travel 520 mm table length 760 mm table width 360 mm

Condition: used, Year of construction: 2000, GEA Happel - Ziehl Abegg Industrial Warm Air Heater / Fan M532C.DJ12 We are offering this industrial heater. ⭐︎ Condition: used, as shown in the photos ⭐︎ This unit, which we recently dismantled, was in perfect working condition up until removal. Bwedpfx Aew Eu Dujbzow Dimensions: 100 x 900 x 800 mm (L x W x H) ⭐︎ Additional technical data: see photos. Scope of delivery as pictured – will be delivered as shown. All our items are dismantled, cleaned, and visually inspected for damage by our company’s qualified personnel prior to sale. For all relevant item data/information, please refer to the description and photos. All information has been provided to the best of our knowledge. The offered item is sold as described and as inspected. 2 units available Price is per piece #Shelf 4.5.7 Shipping possible, but buyer pays shipping costs. *Collection preferred* International buyers welcome – please ask for shipping rates to Europe and overseas.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Total power requirement 3 kw Bsdpfx Abevz Eg Hszsww

Condition: used, mileage: 2,62,581 km, power: 170 kW (231.14 HP), first registration: 08/2007, overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 5,190 kg, empty load weight: 6,800 kg, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition, see photos * Only 15,307 operating hours * Premium salt spreader GEMEINER type 3000TCFS 3m3 * Capacity: 3.0 m³ * Premium snow blade Schmidt type MS33 * Schmidt snow blade type MS33 * Clearing width: 3,300 mm * Vario Pilot interchangeable steering * Hydrostatic drive (Easy Drive) * 6 cylinders * Municipal control * Tipping hydraulics * Trailer hitch * Towing capacity: 28,010 kg * Trailer hydraulics * Hydraulically adjustable municipal plate * Front hydraulics * Front PTO * 4x4 all-wheel drive * Winter service lighting * Air conditioning * Cruise control * Auger drive * Engine brake * Joystick control * Heated windshield * Air-suspended driver's seat with seat heating * Heated electric mirrors * Electric windows * Storage compartments * Anti-lock braking system (ABS) * Up-mounted exhaust system * Leaf spring suspension * Wheelbase 3,600 mm * GVW: 11,990 kg * Unladen weight: 6,800 kg * Payload 5,190 kg * For sales to entrepreneurs/traders, plus 19% VAT. Bwjdpfxovhqvmo Abzow If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Vehicle Inspection Association), without a new SP (Special Vehicle Inspection Association), and without a new UVV (German Accident Insurance Association). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not under any misconceptions about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly welcome. All information is provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is responsible for verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible. Bwsdpexq Exdjfx Abzsw

Year of construction: 2006, condition: ready for operation (used), General Data Bjdpjwgp S Aefx Abzeww Machine weight 4500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm Workpiece Workpiece weight 200 kg Additional Equipment Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: KL10051417, Schallschutzkabine aus Item Elementen Bwjdpfx Absxfbygezjw

Condition: used, mileage: 2,69,384 km, power: 235 kW (319.51 HP), first registration: 04/2011, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Suitable for bulky waste and plastic, yellow bags, 3 seats differential lock, trailing axle liftable, stop brake for refuse collection vehicle, 3-seater, automatic air conditioning, ABS, ASR, disk brakes, central locking, cruise control, V-limiter 30/85 km/h, radio, rotating beacons, electr. Electric windows, lifting roof, central locking system, cornering light, camshaft output 650Nm with flange, reversing lock - running board circuit, left-hand drive, all rear view mirrors heatable and electric, electronic brake system, front sun blind, ECAS air suspension system, HALLER M 21 x1C plastic, yellow bags and bulky waste suitable, press force 40 t, without chute with integrated inch chute, BEKA-MAX - central lubrication system, tool box, 3 seats Bwodpof Dg U Tefx Abzew

Condition: used, mileage: 3,25,080 km, power: 235 kW (319.51 HP), first registration: 12/2013, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 9,800 kg, empty load weight: 16,200 kg, next inspection (TÜV): 12/2025, wheelbase: 3,950 mm, brakes: engine braking, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, total length: 10,130 mm, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, Zöller Magnum X1EC23 No. 1310019 Non-binding offer—subject to change and prior sale—sale is made under exclusion of any warranty—all information without guarantee! Bedpfx Abswnr Ezszjww

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 Bedpfxotvf Htj Abzsww - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Manufacturer: VETTER : Load capacity: 1000 kg Boom length: 11300 mm total height: 6700 mm Bsdpfx Aelz Nznebzeww effective length: 9700 mm