Used Halls for sale (327)

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Dedpfev T Tf Uex Addela Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long Dodpfjxxh Hasx Addola • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: used, functionality: fully functional, Year of construction: 2016, Silo System I Consists of 12 hopper silos with access doors, sight glasses, and ventilation hoods. Arranged in two separate rows of six (on the left and right side of the bucket elevator) along the hall wall. Total storage capacity approx. 348 tons (29 tons per silo). Dimensions per silo: 3.10 m x 3.10 m, height 5.40 m, capacity approx. 26.3 tons. _____ Silo System II Comprising three single-cell hopper silos with raised outlets, including access doors and aeration cone: - Silo 1: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) - Silo 2: 3.10 m x 3.10 m / height 5.23 m (approx. 23 tons) - Silo 3: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) _____ 2 x trough chain conveyors RTF 20 S (beneath the silo group), galvanized version. Total length: 19 m (conveying length 18 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ Trough chain conveyor RTF 20 S, total length: 5.0 m (conveying length 4 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ ABC conveyor belt system, belt width 500 mm, capacity approx. 40 t/h. The belt conveyors are designed as trough belt conveyors made of aluminum. All are supplied with oil-resistant belts, spindle tension devices, infeed and discharge hoppers, as well as internal and external belt scrapers. A-conveyor: length 9.00 m, with 2.2 kW drum motor B-conveyor: length 22.00 m, with 3.0 kW drum motor C-conveyor: length 10.00 m, with 2.2 kW drum motor Including control panel, cables, cable trolley, and C-rails for the cables; radio control unit for mobile operation. _____ Mobile intake auger with hopper. Adjustable incline from 15° to 25° via universal joint. Length of inclined auger: 2.42 m. Discharge height: 0.92 m. Intake hopper (L x W x H): 1.49 m x 1.00 m x 0.44 m. Raised intake hopper: 2.95 m x 1.41 m x 0.61 m. _____ Bucket elevator Type EB 20 A for outdoor installation, length: 7.0 m, capacity approx. 20 t/h _____ Dsdpexyqbpofx Addjla Control cabinet for operating the conveyor units and belt system, constructed of painted sheet steel. - Siemens ISOBUS / Display, touch-screen Pricing: Ex works, loaded. Disassembly by purchaser. Sale of individual components is possible.

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating Dlsdpjhrnv Nofx Addoa made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: good (used), functionality: fully functional, Year of construction: 2012, Hydraulic Swivel Bending Machine Make: HOCHSTRATE Model: 3000/6 Year: 2012 Technical Data Manufacturer: HOCHSTRATE Model: 3000 x 6 Year of manufacture: 2012 Sheet width: 3040 mm Bending capacity: 6 mm (400 N/mm²) Stroke: 250 mm Motor power: 7.5 kW Dodjxr Eaqspfx Addela Dimensions: approx. L 4.8 x W 3.0 x H 2.20 m Weight: approx. 6.5 t Equipment • Controlled backgauge 100–1000 mm • Pneumatic upper tool clamping • Motorized bending beam adjustment • CNC-controlled crowning • Adjustable clamping pressure • Segmented gooseneck rail, H 130 mm • Bending rail 30 mm • Continuous sharp rail 45° • Operating manual All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, working width: 550 mm, area performance: 3,300 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah R55+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It offers a stepless drive system, a detergent dosing system, automatic shut-off of the fresh water supply while filling, and a dirty water tank cleaning system. Additionally, the machine can be configured via app, and maintenance or support information can be accessed through it. The Kärcher B50 W features a robust roller brush deck, which provides the advantage of sweeping coarse debris, such as wood splinters, into a separate coarse dirt container. This ensures that suction performance is not compromised. It is suitable for daily cleaning of workshops, schools, sports halls, and similar facilities. Djdpsxb A U Refx Addsla Technical data: Working width: 550 mm Tank capacity: 50 litres / 50 litres (fresh/dirty water) Runtime: max. 2.5 hours Area coverage: 3,300 m²/h

Condition: new, Year of construction: 2025, Electric Scissor Pallet Truck HT15E The HT15E electric scissor pallet truck is a multifunctional warehouse device designed for convenient and safe pallet handling. It combines the features of a classic electric pallet truck and a lift table, allowing not only transport but also lifting loads up to 800 mm. It performs perfectly in packing areas, sorting facilities, assembly halls, and production lines. With a load capacity of 1500 kg, the HT15E model easily handles most standard pallets. Its robust scissor construction ensures stability and safety of lifted goods, while the electric motor provides smooth, fast, and effortless lifting. The operator doesn’t need to use physical force – simply press a button and the truck does all the work. Powered by a high-performance battery, the truck enables long, uninterrupted operation. Charging is easy with a standard mains charger. This ensures that the HT15E is always ready for use, regardless of workload intensity. The truck is equipped with an ergonomic control tiller, a precise hydraulic system, and high-durability wheels that ensure smooth movement even on uneven surfaces. Its compact design allows easy maneuvering in narrow aisles, while the lifting function helps maintain proper working posture – significantly improving operator comfort and safety. The HT15E is the perfect choice for companies that value efficiency, ergonomics, and reliability. It performs excellently both in small warehouses and large logistics centers where precision and work speed are key. Key Advantages: Load capacity: 1500 kg – stable operation even with heavy loads Lifting height: 800 mm – ideal for order picking and packing Electric lifting system – quick and effortless lifting Reinforced steel construction – resistant to wear and overload High-performance battery – long operating time on a single charge Quiet operation and easy control – comfort in everyday use Technical Specifications: Parameter Value Load capacity 1500 kg Fork height 85–800 mm Fork length 1170 mm Fork width 160 mm Fork spread (outside) 540 mm Fixed wheel ⌀ 75×50 mm (2 pcs) Steering wheel ⌀ 180×50 mm (2 pcs) Dsdoxurpdepfx Addjla Battery 12 V / 50 Ah Weight 115 kg

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Dljdoxnlwzspfx Addsa Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Dodpexli I Sefx Addjla Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Dljdpju A U Utofx Addsa The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Dodpfx Aeq Abnnoddjla Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: refurbished (used), Year of construction: 2019, operating hours: 189 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 150 l, battery voltage: 36 V, The Kärcher B150R D90 Dose was manufactured in 2019 and has only 189 operating hours. We have completely overhauled the machine; every component has been cleaned and tested for proper functionality. The suction bar, base plate, and bumper have been sandblasted and newly powder-coated in our workshop. New squeegee blades on the suction bar ensure perfect water pick-up performance. The machine is fitted with six new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. Additionally, the Kärcher B150 R features a cleaning agent dosing system that precisely meters and introduces detergent during the cleaning process. Djdpfsxx S Dcox Addjla The Kärcher B150 R is ideal for medium to large areas such as logistics halls, workshops, or underground car parks. Technical data: Working width: 90 cm Fresh water tank: 150 liters Suction width: 118 cm Weight: 957 kg

Condition: excellent (used), Complete steel structure of the production hall. Dimensions - 31.5 x 30 x 9.85 m with the corresponding ROOF sandwich panels made of insulating panels. NOTE - hall is WITHOUT WALL PANELS The hall was built in 2010. In excellent condition! The total weight of the structure is approx. 60 tons. The structure is protected with primer and varnish. Djdexu E Igjpfx Addsla The outer columns are made of IPE 500 profile, and the middle one is made of IPE 600. The hall has preparation for a crane track. A project and static calculation have been made for the hall. The hall has been disassembled and transportation and loading can be arranged.

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dedpfx Aowh Ri Esddela Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Dodpfxewb Amij Addola Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 1,380 mm, overall weight: 80 kg, empty load weight: 80 kg, operation weight: 80 kg, High-quality wall-mounted (gable) fans with dimensions of 1380 x 1380 x 450 mm and a capacity of 44,500 m³. Motor power: 1.1 kW, 3-phase. This exhaust fan is suitable for industrial or agricultural applications and is often used in pig farms, poultry houses, greenhouses, or production halls. • The unit provides effective ventilation by removing stale air, excess moisture, and unpleasant odors. Dsdpfxexuvatj Addsla • It is a push-pull fan, operating in both exhaust and intake modes. • The galvanized sheet metal and protective mesh construction ensure durability and safe operation. • The large blade diameter and powerful motor enable high airflow efficiency.

Condition: like new (used), Year of construction: 2021, Motorized folding machine Fab. Hezinger/Erbend Typ. MFA 3200x3mm Year 2021 Technical data Make Hezinger / Erbend Type HF MFA 3200 x 3 Year of construction 2021 Dlsdoub R Spopfx Addea Effective length 3200 mm Capacity 3.0 mm Air pressure 6 bar Upper beam stroke: 250 mm Motor 20.2 KW Weight 8.0 t Equipment - Rotating upper beam with 2 tools - Bending beam swivel range 0 - 135 - Motorized folding beam lowering 80 mm - Manual crowning of the folding beam - Backgauge 6 -1,300 mm with supports and ball rollers - ErFold control system - Safety foot switch with 3 pedals - Light grid for front protection - LED status display - Tools: Pointing rail upper beam 30° R=1.0 mm Three bending beam rails: 15, 25, 35 mm Split goat foot with height 120 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Dljdpfx Ajxwn R Noddoa Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake Dedpfx Adoxwvrusdela - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, Year of construction: 2024, SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with extremely easy handling. Bring back the shine to your hall! The all-electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas much easier, especially thanks to the machine's excellent maneuverability. The steering angle is 90°, so columns or narrow spaces, for example, are no problem. No special training is required to use the machine. Simply fill it up, mount it and drive off. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR SCRUBBER DRYER RR1030FS - DISCOVER THE ADVANTAGES: -- Fully electric scrubber dryer with 1030mm working width - ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80 liter fresh water tank and 85 liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR1030FS Drive: Seat Power suction motor: 500W Power: Brush motor: 500W Power: Drive motor: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Total length: 1400mm Total width: 1030mm Overall height: 1100mm *Further technical data available on request. The ride-on scrubber dryer is designed to be user-friendly to make the cleaning process as straightforward as possible. The intuitive control panel makes it easy to control all functions, so even inexperienced users can quickly get to grips with it. Thanks to the ergonomic seat and clear view of the cleaning surface, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure that long cleaning intervals are possible without the need for frequent refilling or emptying. The machine is easy to maneuver and is ideal for use in large areas. Dljdpfxouacy Aj Addsa Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on scrubber-driers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required Dedpfxsk Abbbs Addsla 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 453 kg, lifting height: 7,900 mm, overall weight: 2,216 kg, tire condition: 75 %, We are selling a large Snorkel S4726E (SB100E/10) scissor lift suitable for both indoor and outdoor use. It is a self-propelled, electric unit with built-in batteries. The maximum working height is approximately 10 meters, making it ideal for tasks on tall buildings or inside high halls or warehouses. In recent years, it has only been used indoors, so its condition is quite good, as shown in the photos. Everything works perfectly. Inspection book and manual are available. This is a quality product, not a Chinese copy. Non-marking tires. The platform can be extended by an additional 1.2 meters. The machine is located in Wetzlar-Dahlheim and can, of course, be viewed and tested. Dodpfexwxd Tjx Addola If you have any questions or are interested, please feel free to contact us!

Condition: excellent (used), Year of construction: 1995, working width: 3,000 mm, sheet thickness steel (max.): 2 mm, stroke length: 250 mm, Motorized folding machine Fab. SCHRÖDER Typ. MAK II 3000/2,0 Year 1995 Technical data Make: SCHRÖDER Model: MAK II Year of construction: 1995 Capacity: 2 mm Effective length: 3000 mm Upper beam stroke: 250 mm Dimensions: approx. L 4.10 x W 1.80 x H 1.50 m Weight: approx. 4 tons Equipment: - Manual backgauge 750 mm - Bending angle adjustment via potentiometer - Bending rails 10 mm, 25 mm - Focusing rail - Technical documentation All information without guarantee. Dledpfeu Hzuhsx Addoa A demonstration is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) Dodpfsw Aqamjx Addsla - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) For more information, please contact us by e-mail. We operate 24/7.

Condition: new, Year of construction: 2025, Recirculating chamber furnace, electric, new device, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Controller: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 pcs circulating air fans - Double doors with safety door sensors - Over-temperature protection, Eurotherm 3216i - Control/recorder with color touchscreen display Dedpfx Adjlkb Ezjdsla - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recess for trolley loading - Documentation, CE Declaration of Conformity - Electrical schematic with spare parts list We are happy to offer transport, on-site installation, and staff training upon request. Also available as a new unit with exhaust fan and alternative configurations! Delivery time approx. 10 - 12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also retrofit or customize according to your requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating chamber oven, chamber recirculation oven, annealing furnace, tempering oven