Used Halls for sale (372)

Condition: used, Year of construction: 2018, machine/vehicle number: LC592, Used complete CSD canning line 2018 - 18.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 18,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control approach ensures coordinated start/stop, accumulation management, and fault handling, providing stable throughput at rated speed. Operator interfaces are designed for straightforward format adjustments and routine production tasks. Safety interlocks and guarding support secure operation while enabling efficient maintenance access.Production Line Integration CapabilitiesThis production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, and secondary packaging. Conveyor systems provide smooth transfers and buffering between machines to maintain optimal flow. The 0.33L can format is supported across the entire line, with provision for standard format changeover procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions to form a complete beverage production and industrial packaging system.Machine Condition & Maintenance HistoryThe line is reported as still on line, indicating it remains installed and in use at the time of documentation. The 2018 build year across key machines suggests modern engineering and contemporary safety design. Routine maintenance and serviceability are facilitated by straightforward access points and standard components common to ZhongChen packaging machinery. Operating hours are not specified.Operational Performance & VersatilityOptimized for CSD processing, this used bottling line supports consistent carbonation retention and gentle product handling through filling and seaming. The can rinser and warmer modules help ensure product quality and downstream pack integrity, while the shrink wrapper forms stable packs ready for palletizing. Quality control is supported by stable handling and synchronized transfers to minimize scuffing and deformation, contributing to dependable second hand beverage production results.Installation Requirements & Site PreparationThe line is arranged as a modular set of machines connected by conveyors, allowing flexible placement within a suitable production hall. Standard utilities expected for beverage lines apply, including electrical power, compressed air,... Crsdpfeydc Ttsx Aa Nob

Condition: good (used), Year of construction: 1985, functionality: fully functional, Opportunity. The price has been significantly reduced due to the clearance of a former production hall. Used machine in good technical condition, fully operational. Year of manufacture: 1985. - 3-axis machine with beam work table. - Working range: x=2500; y=1200; z=250 mm. Credpfsu U H D Ujx Aa Nsb - Table without extraction. - Speed: 18,000 rpm. - Motor power: 15 kW. - Magazine for 16 tools. Model: NUM 760.

Condition: used, mileage: 1,07,200 km, power: 110 kW (149.56 HP), first registration: 02/2019, fuel type: diesel, overall weight: 2,730 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,959 mm, total width: 1,920 mm, total height: 1,899 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Citroen Jumper M 2.0L 110KW/150HP Panel Van with basic camper conversion, Camp-Sleep bed, towbar, auxiliary heater, and much more, from 2nd owner Crjdoyn Tkdopfx Aa Njb Special equipment: Audio navigation system: Digital radio DAB, connectivity box, touchscreen, front and rear parking sensors incl. reversing camera, glazed rear wing doors (opening angle 180 degrees), automatic climate control, cargo area partition with window, 7x17 alloy wheels, metallic paint, right sliding door with window, front side airbag, driver's seat height adjustable with lumbar support and ModuWork double passenger bench (cloth/artificial leather), auxiliary heater (stand heating) Further features: Driver / passenger airbag, dual passenger seat, onboard computer, driver assistance system: emergency brake assist, rubber mat for passenger/cargo area, van body, lumbar support for driver's seat, adjustable, steering column (steering wheel) mechanically height/length adjustable, headlight range adjustment, engine 2.0L - 110KW Blue-HDI FAP, wheelbase 3,275 mm, spare wheel with standard tires, low-emission in accordance with Euro 6 (PSA Euro 6.1) emissions standard, SCR system (AdBlue technology), visibility package, height-adjustable driver’s seat, 12V socket in trunk/cargo area, 12V socket in front center console, stop-start system ---- Delivery: immediately available ---- We are your export specialists! For our customers from neighboring Switzerland, we organize all customs and MFK formalities, so you can take over your new camper with your own license plate. For customers from other countries, we are happy to assist with all export procedures. Export plates, insurance, transport - no problem - just contact us. Home delivery by one of our drivers is available upon request. Financing/leasing & trade-in of motorhomes, cars & motorcycles possible. If you have any questions about this offer, we are also happy to help you by phone: Your contacts: Mr. Hall / Mr. Langhagen / Mr. Schulze

Condition: new, functionality: fully functional, overall weight: 8 kg, total length: 486 mm, total width: 389 mm, input voltage: 220 V, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP66, Good day, We are pleased to offer you, without obligation, brand new, original packaged Philips LED luminaires of the type BVP130 LED210-4S/740 PSU S ALU C1KC3, from the CoreLine Tempo Large product family. Here are some technical specifications: Manufacturer: Philips Product family: CoreLine Tempo Large Type: BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux: 21,000 lm System power: 164 W Light color: 740 neutral white Optics: Symmetrical Beam angle: 70° x 21° Input voltage: 220 to 240 V Input frequency: 50 to 60 Hz Dimensions: 389 x 486 x 40 mm (W x H x D) Crjdpfoyzq Ubox Aa Nob Weight: approx. 7.5 kg Protection class: IP66 For further technical details, please refer to the manufacturer’s PDF product data sheet and PDF installation instructions available for download. Application areas, lighting for: - Public facilities, sports complexes, open areas, street lighting - Industrial sites, company premises, loading zones, transshipment areas - Building facades, billboards - Warehouse, hall, and logistics lighting, etc. Mounting options: Suitable for surface, wall, truss, and pedestal/floor mounting We would be delighted if these LED luminaires are of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, Year of construction: 2026, The air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively capturing dust, fine particles, and small debris generated during operation. Its use significantly reduces airborne dust, resulting in improved operator comfort and a cleaner working environment. During sweeping, contaminants are not only collected by the brushes but also drawn into the machine along with air. The air filter ensures these particles are effectively trapped, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and “dust-free” cleaning—especially important in warehouses, production halls, and enclosed spaces. A large filtration surface area and properly structured filter material allow for the effective capture of even very fine particles. Modern sweepers often use panel filters, which offer high performance and ease of use—frequently equipped with shaking or cleaning systems that help maintain consistent efficiency. The filter also serves a protective function for the machine’s components—it prevents contaminants from entering the suction system and other working parts, reducing the risk of failure and extending the machine’s lifespan. An additional advantage is easy access and quick replacement, allowing the machine to be kept in optimal condition without unnecessary downtime. Regular inspection and cleaning of the filter are key to maintaining maximum sweeper performance. Key benefits: effective reduction of dust during operation Crodpfx Aaeyvp Tfo Nob improved air quality in the working environment high efficiency in filtering fine particles protection of machine components from contamination extended lifespan of the sweeper easy maintenance and quick replacement The air filter is an essential component for ZP7500 sweeper users who expect maximum cleaning efficiency while maintaining high comfort and safety—especially in dust-intensive environments.

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Csdpjxxh Taofx Aa Nsrb Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: good (used), An electric bi-parting sliding gate is being offered. Hot-dip galvanized. Year of manufacture: approx. 2005. Dimensions: Crodpfxsx N Ta Ns Aa Njb Total length of both leaves: 16.60 m. Gate opening: 12.00 m. Height: 1.20 m. Complete with drive units. Includes 4 fence panels: length 2.60 m x height 0.90 m.

Year of construction: 2026, condition: new, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle suitable for machining extruded aluminum profiles, light metal, PVC and steel from 3 sides. Controlled tilting worktable: -90°/0°/+90° with intermediate angles. The machine is equipped with an electrospindle 4Kw, 18000 rpm, controlled by inverter and quick tool change (tool changer) with spindle ISO30. Interpolation X, Y, Z and W axes controlled by the numerical control. Brushless motors for X, Y, Z and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to process longer parts. Standard equipment: 4kw electrospindle ISO30 4 pneumatic clamps (manually adjustable) safety guard automatic tool changer (10 tools) 4x ISO30 cone complete with tools 3x compartments for collecting chips air nozzle Technical specifications: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Crodpfxshywz So Aa Neb Z-axis travel 300 mm Rapid traverse (X,Y,Z): 50 m/1' Acceleration (X,Y,Z): 1.5m/s2 Electrospindle: 4Kw ISO30 / 6.6kw HSK63 (optional) Spindle cooling: air cooling Max tool length: 130mm Max. tool diameter: 140mm (saw blade) Working pressure: 7 bar Weight 2500kg It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, 5-axis CNC machining center for processing aluminium, steel, light metals and PVC. Bolero 5 has a massive machine bed. The machining spindle is a 17 kW (S6) electrospindle with HKS 63F cone. The maximum speed is 24,000 rpm, controlled by a frequency converter. Bolero 5 has an automatic tool changing system with a 12-place magazine. The work area is equipped with 8 automatic positioning motorized vices controlled by the CN. The travel range of the X-axis is 7,000 mm (optional extension to a total of 9,400 mm). Pendulum machining is also available if desired (optional). It is operated via a PC Windows with a 17" color screen. The machine is equipped as standard with safety and protective devices in accordance with EC directives. Crodpfehy S Hmsx Aa Neb It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering Csdpfx Asfww Sqja Nsrb until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Codpfxefu Iwmo Aa Nsrb It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. Crsdpfx Aofu Swxoa Njb product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) Codpfx Aaofu Irze Njrb anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, Csdpfsidun Dsx Aa Norb powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow Crsdpoidunvsfx Aa Neb 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material Crsdpfxeidunno Aa Neb 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Cjdpfsgwt Rnsx Aa Nsrb Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Cjdpfxogwt S To Aa Nsrb

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing Credpfx Aegwt R Dsa Neb • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Codpfx Aaoyypl Ao Nsrb

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow Crsdpoidun Isfx Aa Nsb 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 350 M, manual (MG TL-350-M) The UK 350 M is a manual table saw with simple, safe operation! With this machine double miter cuts up to 45° right and left are possible. The miter adjustment is done here by turning the stop jaw. The UK 350 M has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired system in our production/demonstration hall. Crodpfxoidqk Ss Aa Njb Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 M, manual The UK 300 M is a manual table saw with simple, safe operation. Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300 M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Miter adjustment left 45º / 90º / right-45º degrees integrated manual length stop ideal for mobile use ideal for profile cuts workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired machine in our production/demonstration hall. Crodpfxsidqahe Aa Nob Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Mist spray device for air-oil cooling workflow 1) Setting the cutting angle Cjdpfx Aaeidqbbe Nsrb 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Crodpfegculvox Aa Neb