Used Ham Press for sale (29,599)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Working pressure: 440 bar Delivery rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.800x900x1.450 mm weight: approx. 1.230 kg year of construction: 2015 Condition: in very good used condition. Nlodshf Ixmepfx Aa Ieh

Condition: good (used), Year of construction: 2016, operating hours: 1,300 h, functionality: fully functional, operating pressure: 500 bar, empty load weight: 1,420 kg, fuel: diesel, power: 34.5 kW (46.91 HP), temperature: 95 °C, volume flow: 1,800 m³/h, Equipment: chassis, Dynajet 500 TH hot water system - Very good condition 500 bar / 30 l/min Nodpfov S H Uajx Aa Iolh 34.5 kW

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Nsdpfx Aaeh Uc Iuj Iolh Working pressure: 600 bar Delivery rate: 66 l/min. Drive speed: 1500 rpm. Driving power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x1.000x1.300 mm weight: approx. 1.300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: like new (used), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature -100 to + 200°C Table in lower position (WxDxH) 889 x 889 x 889 mm Nlodpfx Aaeqwybgo Ieh Table in upper position (WxDxH) 889 x 889 x 635 mm Overall dimensions (WxDxH) 1425 x 1748 x 2134 mm Work table 762 x 762 mm Max load 145 kg Acceleration 5 to 75 gRMS Voltage 480 or 440 V / 60 A / 3F 400 or 380 V / 80 A / 3F Type: Qualmark T2.5 + compressor 99480630 Condition: used Only 147 hours Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: used, Year of construction: 2006, functionality: fully functional, pressure: 2,250 bar, fuel: electricity, power: 75 kW (101.97 HP), water pressure: 2,250 bar, pump capacity: 16 l/min, Electric driven ultra high pressure waterblasting unit 400V-50Hz 440V-60Hz 2250 bar at 16 ltr/min (32,000 psi at 4.2 USGPM) Nljdpfx Aaow Rq Dao Ish - frequency converter - automatic pressure regulation - pneumatic by-pass

Condition: used, pressure 70 t chamfer lenght 2600 mm distance between columns 2750 mm Nljdpotqqqiefx Aa Ioh stroke 60 mm total power requirement kW weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Condition: used, Year of construction: 2000, overall weight: 3,860 kg, CompAir screw compressor Model: Champion 180 Year of manufacture: 2000 Nlodeu Rn Ngjpfx Aa Ieh Intake pressure: 1 bar Stage pressures: 2.2 / 12 bar Volume flow: 17 m³/min Engine power: 110 kW The compressor is in working order and was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 1997, overall weight: 2,480 kg, power: 75 kW (101.97 HP), CompAir screw compressor Model: Champion 135 Year of manufacture: 1997 Intake pressure: 1 bar Nlsdou Rn Hrepfx Aa Ish Stage pressures: 1.8 / 7 bar Volume flow: 12.8 m³/min Engine power: 75 kW The compressor is in working order and was regularly serviced and checked until it was decommissioned.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: P-1843, actuation type: hydraulic, controller model: Siemens Sinamics G110, bending force (max.): 80 t, overall weight: 5,500 kg, TECHNICAL DETAILS Bending force: 80 t Lowering speed: 80 mm/s Safety distance: 1,500 mm MACHINE DETAILS Control: Siemens Sinamics G110 Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,150 x 2,700 mm Machine weight: 5,500 kg IP protection class: 54 Nljdpfxoxlthce Aa Ieh

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Nlodpfx Aexnyqpoa Ioh Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm MACHINE DETAILS Working temperature: 90°C Max. temperature: 120°C Electrical data Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Trumpf TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm Nodpfx Aoxn Sumoa Ielh EQUIPMENT 2 bending aids Wila tool clamping system (top and bottom) 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors 6-axis backgauge

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Nljdpexc Txcofx Aa Ish

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, KOMATSU TRANSFER PRESSES 2300 ton (1500 + 800 Ton) Year 2002 *E4T are the standard Komatsu transfer press machines loaded with the high speed servo feeder on the compact frame. *Large Transfer Presses E4T -Eco-friendly press machines -The high speed press machine pursuing high productivity Nsdpexmrzqefx Aa Iolh Immediate Delivery

Year of construction: 1995, condition: good (used), machine/vehicle number: 2103, 2 Colours Quick Action Clamps Water Dampening Nljdpefuwmqofx Aa Ish Colour Rollers Water Rollers

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to Njdpfx Aaskw Rbae Iolh installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Front light curtain Siemem control Weight 12,5to

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Frequency: 50 Hz Nledpoxnyg Refx Aa Ijh EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 220 t, stroke length: 450 mm, working length: 4,250 mm, Equipment: foot remote control, TECHNICAL DETAILS Nodpfxsxn St No Aa Iolh Press force: 220 t Bending length: 4,250 mm Stroke: 450 mm MACHINE DETAILS Dimensions & Weight Space requirement: 5,000 × 3,000 × 3,000 mm Machine weight: 20 t Total power requirement: 54 kW EQUIPMENT 2 bending aids in front of the machine Parking area to the left for bending aids Light barrier in front of the machine 4 backgauge fingers Foot switch Including tooling

Condition: used, Used stainless steel clarifying filter press by Seitz Orion type OF 100/150. Press has 154 stainless steel filter plates with dimensions 1000 mm x 1000 mm and two end plates. Filtration surface approx 310 m2. Machine has hydraulic closure. Mounted on stainless steel frame. Includes feeding connections, manometers and local control panel. Nljdpfx Aexrb H Tea Ish Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: good (used), Block Press Block Press SIPA Max working length: 3000 mm Max working height: 1300 mm Number of vertical cylinders: 4 Number of frontal clamps: 6 Njdpfxexrfvxs Aa Iolh

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 200 t, stroke adjustment: 60 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. Nlodpfexrbmyex Aa Ijh - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Nedsw E Emaepfx Aa Iolh Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Nledpfx Aaexn Srxs Ieh Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: like new (used), For sale: Hydraulic Press Brake REDCNC XD-5016 III Condition: New, unopened. Manufacturer: REDCNC Machinery Nlsdpfexnmcrex Aa Ieh Model: XD-5016 III A modern upward-moving table type hydraulic press brake designed for precise sheet metal bending. The equipment is built using high-quality components sourced from manufacturers in Japan, Germany, France, and Taiwan. Technical specifications: Nominal force (pressure): 500 kN (50 tons) Working table length: 1600 mm Distance between uprights: 1220 mm Throat depth: 405 mm Stroke length: 100 mm Max. opening: 370 mm Die height adjustment: 250–255 mm Approach speed: 52 mm/s Bending speed: 8 mm/s Return speed: 46 mm/s Number of cylinders: 1 Main motor: 4.5 kW (Siemens, Germany) Precision: ≤ ±0.01 mm (mechanical), ≤ ±0.02 mm (ram) Back gauge precision: 0.15 mm/m Hydraulic system capacity: 33 L Weight: 1600 kg Dimensions (L × W × H): 1755 × 1440 × 2070 mm Features and equipment: – Upward-moving hydraulic operation principle ensures safe, reliable, and precise performance – Mechanical synchronization and roller guide system for increased accuracy – Upper beam crowning device for consistent bending precision along the entire length – CNC control with touchscreen display (Keyence Japan) – Electronic handwheel control for precise upper and lower tool positioning – Servo system (Mitsubishi Japan) ensures smooth and fast back gauge operation – Hydraulic system filled with Shell oil (USA) – Frame and cylinder components: Amada Japan – PLC Controller: Keyence Japan – Control system: NC9 Japan – Main electrical components: Schneider France, Panasonic Japan, Omron – Seals: NOK Corporation Japan Purpose: The REDCNC XD-5016 III press brake is designed for bending, forming, and fabricating sheet metal profiles. It is perfectly suited for small to medium-sized manufacturing, producing parts from steel, aluminum, copper, and other metals. Its robust frame, high-precision hydraulic system, and CNC control deliver excellent accuracy, repeatability, and performance. Advantages: – CNC control with touchscreen – Japanese and German components: Keyence, Siemens, Mitsubishi, Amada – High accuracy (±0.01 mm) – Compact size, reliable operation – Ideal for workshops with small to medium production volumes – Easy programming and simple maintenance If you have any further questions, please feel free to contact us.

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. Nsdpjugtv Iefx Aa Islh The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Nlodpfsixz H Esx Aa Ish Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN