Used Hand Lever Machine for sale (69,833)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement. Blodpfezw Tw Uox Aiaep

Condition: used, Year of construction: 2005, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1150/710/710 mm Tool holder : SK40 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:28 kW Torque:121 Nm Taper:SK40 NC-Swivelhead: B-Axis:0,001° Swivelrange:-120°/+30° NC-Roundtable: C-Axis:0,001° Clamping surface:ø800 mm In general: Toolmagazine:2x 16 stations Rapid travers in X/Y/Z:26/26/20 m/min Clamping surface static table:1.500 x 795 mm Table loading (max.):550 kg Equipment/Accessory: Position sensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 40 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 641 Setup operations:Operation mode 4 Bljdpfx Ao Ahl Hfeiajp Further Equipment:ROTO-Clear, Rinsing pistol Further Accessory:Misc. used Toolholder SK40

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Blodpfox Itfisx Aiaep Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: new, Year of construction: 2026, operating hours: 5 h, The NOMA NOWICKI MH-660 SAS is an advanced brine injector with servo-driven head and conveyor, fitted with 660 needles and designed for injecting red meat, bone-in and boneless, poultry, fish, and fillets. The machine, built in 2026, has multi-stage brine filtration with an FBN rotary filter, a head hygiene system, and touch-panel control. Documentation and tool trolleys are included. How does the NOMA NOWICKI MH-660 SAS brine injector work? The product is fed onto a conveyor that moves it under the needle head. The head and the conveyor have independent servo drive systems, and the conveyor drive is synchronized with the head, which allows many injection patterns. Conveyor speed is controlled electronically and head speed smoothly, so the injection is repeatable. The brine passes through a multi-stage filtration system: an internal filter with replaceable cartridges whose graduation is chosen to suit the needles, an FBN rotary filter with a slotted drum for the return brine, and a specially shaped filter bottom. The controller automatically monitors filter contamination. All injection processes are controlled and programmed from the touch panel. Key advantages of the NOMA NOWICKI MH-660 SAS brine injector A large number of needles and independent servo drives for head and conveyor give a dense, repeatable injection pattern and a high degree of control over the process. Exchangeable needle heads and a choice of needles and process settings allow the machine to be matched to different raw materials and recipes. Multi-stage filtration with automatic contamination monitoring, quick replacement of needle heads, and a head hygiene system that shortens internal washing time make it easier to keep the machine clean and running. The touch panel simplifies operation and process programming. Technical specifications of the NOMA NOWICKI MH-660 SAS brine injector Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector (SAS injector) Model: MH-660 SAS Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, made in the EU Number of needles: 33 x 20 = 660 needles Needle diameter: 2 mm Belt width: 600 mm Dimensions with brine filter (L x W x H): 3000 x 2210 x 1870 mm Drives: independent servo drives for head and conveyor, conveyor synchronized with the head Conveyor speed: electronically controlled Head speed: smoothly adjustable Filtration: multi-stage, internal filter with replaceable cartridges, FBN rotary filter with slotted drum, specially shaped filter bottom, automatic contamination monitoring Head: quick replacement of needle heads, head hygiene system Blodpfx Aj Ahncwsiaep Control: touch panel, control and programming of all injection processes Documentation: included Tool trolleys: included

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, working width: 220 mm, stack height: 640 mm, type of input current: three-phase, product height (max.): 220 mm, product width (max.): 640 mm, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm Bljdsxtau Ejpfx Aiaop

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table Bodpfxe Ahn N Uo Aiaelp - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Bljdpfxj Ahn Hyj Aiaep Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: used, Year of construction: 1999, CNC machining center Manufacturer: Homag Type: BAZ 31/60/K Optimat Year of manufacture: 1999 Technical data - Workpiece length max. 6600 mm with single workpiece placement max. 2700 mm with alternating workpiece placement - Workpiece width max. 1200 mm - Workpiece thickness with edge max. 60 mm without edge max. 60 mm with standard clamp without edge max. 120 mm with clamping template when chamfer milling min. 12 mm when radius milling min. 2x radius + 10 mm - Working height, lower edge of workpiece 950 mm - 2 vacuum pumps, each with 66/100 m3/h for clamping system Main spindle 12 kW, water-cooled - for HSK F63 - Three-phase asynchronous motor 12 kW at S1, 600 Hz - Speed range: 1500 - 18000 rpm - Tool weight max. 6 kg incl. tool holder Tool changer, 12 positions - for tools and aggregates with HSK F63 - 12 x diameter max. 130 mm or - 6 x diameter max. 180 mm and 6 x diameter max. 70 mm - Tool diameter for grinding tools max. 200 mm Bodpfx As Ahmz Deiajlp Aggregate interface BAZ for main spindle For accommodating the machining and gluing aggregates with integrated pneumatic-electrical-electronic supply and pivoting drive, C-axis. Swiveling range without limitation. Hose-free compressed air supply. Drilling head with 17 spindles - 1 motor 1.9 kW, frequency-controlled - Speed selectable via program 4500/6500 or 8000 rpm - Each spindle can be activated individually - Arrangement of spindles in T-shape. - 11 spindles in X-direction, 7 spindles in Y-direction Homatic control system CNC programming system WOODWOP Postprocessor Programming based on CNC drawing Laser positioning aid for vacuum clamping system Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), CATALOGUE NUMBER 8137 Technical specifications: - Vertical circular saw blade diameter: 400mm - Blade bore diameter: 30mm - Number of blades: 2 pcs - Horizontal circular saw blade diameter: 400mm - Blade bore diameter: 60mm - Number of blades: 2 pcs - Max. input material width: 450mm Bjdps Ahm Nysfx Aiaolp - Min. cutting width: 70mm - Max. cutting width: 150mm - Max. cutting height: 100mm - Min. raw material length: 600mm - Top: 2 metal, toothed, slip feed rollers - Top rollers function as material clamping rollers - Bottom: 2 metal, pull, toothed rollers - 2 feed speed types + inverter - Feed motor: 1.1kW - Main motor for vertical spindles (left and right): 2 x 3.5kW - Main motor for horizontal saw: 11kW - Dust extraction nozzle diameter: 1 x 200mm, 2 x 110mm - Dimensions (L/W/H): 5650x1620x1450mm - Feeder: 3730x410x850mm - Weight: 1600kg ADVANTAGES - Made in Poland - Very good condition - Used saw - Designed for professional use Net price: 45900 PLN Net price: 10674 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Bledpfxexpqy Do Aiasp Good condition

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 3.000 mm Y-Travel: 2.000 mm Z-Travel: 1.250 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Table size: 2.000 x 1.500 mm Machine length: 7300 mm Bljde Ahkyhopfx Aiasp Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bodpfx Aettc Uasiaelp

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Bljdpfx Aie Ahkxcoajp Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW weight of the machine ca. ca. 150 kg Bjdpfxe Ahkgwe Aiaolp dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0

Condition: used, Stauchmaschine - Creasing Machine for Cartons Krause SR 110 Serial-No. 222 00 Bjdpfx Aie Agp Eksaslp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Falzeinbrennmaschine - Joint-setting machine Karl Tränklein FEM 608-53-6 Serial-No. 608-53-6 Working with 500 mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bjdpfxo Agp Ene Aiaolp

Condition: used, Falzeinbrennmaschine - Joint-setting machine Karl Tränklein FEM 658-58-4 Serial-No. 658-58-4 Working with 500 mm Bledpfx Ae Agp Ersiasp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Case Rounding Machine Hunkeler BDR 40 (4344/1) Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 (4344/1)  Blodpfe Agpzysx Aiasp --complete clean and painted-- Serial-No. 4344/1 Output 250 - 300 pcs/h Spine width 10 - 120mm Spine length up to 450mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Eckenrundstossmaschine - Corner Rounding Machine Polygraph Y6R Serial-No. 246292 Table model Manual Operation Bedpo Agp Adjfx Aiaolp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Calender Punch Machine Renz Super 520 Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Bledj Agp A Nopfx Aiasp On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Ösmaschine - Eyeletting machine Hang 103SP Serial-No. 11388 Bledpfxo Agp Dfj Aiaep Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About Us Since 2014, we have been developing and producing our machines in Austria. In addition to our standard machines, which can be customized, we are also able to offer special solutions. We would be happy to send you our product catalog; simply contact us. HSC 544HP Machining Center + DST 160P Rotary Tilting Table 3rd Generation Key Data - 500x400x330mm travel range - BT30 spindle with 20,000 rpm and 10.5 Nm (other spindle types available) - 18-position tool magazine - Feed rate up to 25 m/min - Compact dimensions of W 1,460 x D 1,470 x H 2,110 mm and a weight of approximately 2,200 kg - Includes DST 160P rotary tilting table with a table diameter of 160 mm and a clearance diameter of up to 200 mm The machines are configured and assembled according to customer specifications. Bedpfx Aj Agq Txjiaelp Depending on the requirements, numerous options are available, such as different spindle types up to 60,000 rpm, different cooling systems, direct measuring system, integrated automation, etc. Control System - CS-Lab / AMT - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement while maintaining high accuracy - Integration of, for example, robots, pallet changers, workpiece changers, etc. is possible Machine Frame - Massive machine frame made of mineral cast, optimized using FEM simulations - Very high vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive Train - AC servo drives, well-matched to the axes, for high contour accuracy - Directly driven and backlash-free ball screws Overview of Spindle Types 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We will be happy to provide you with competent and comprehensive advice in order to offer you the right solution for your machining task.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, • Control system: SIEMENS Sinumerik 808D • Table dimensions: 800 x 320 mm • Max. table load: 300 kgs Blsdpfo Afzdysx Aiasp • X-axis travel: 550 mm • Y-axis travel: 305 mm • Z-axis travel: 460 mm • Distance between table and spindle nose: 100–600 mm • Spindle speed: 10 000 rpm • Spindle taper: BT40 • ATC magazine: 12-station • Drive power: 7,5 kW / 11 kW • Weight: 2800 kg • Dimensions (L × W × H): 2164 × 1860 × 2200 mm Accessories / Equipment • Coolant system • Electronic handwheel • Machine feet • Documentation The machine is available immediately. It can be inspected under power in our showroom.

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Mortising carriage: - Electric feed with stepless speed control - Carriage adjustable in angle - Feed motor 0.46kW - Table size (length/width) 700x450mm, extendable to 1150mm - Cross slide on the carriage – cutting length on the extendable telescope 1860mm - Rotating block in the cross slide - 2 pneumatic clamps Length-cutting saw: - Max blade diameter 380mm - Max cutting height 110mm - Blade adjustable up/down, front/back and in angle - Blade guard - Saw motor 2.2kW Mortising spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 320mm - Spindle diameter 40mm - Spindle working height 220mm - Spindle lock - Motor 7.5kW Profiling spindle: - Pneumatic spindle stroke Bsdpj Af U Ehsfx Aiajlp - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 200mm - Spindle working height 220mm - Spindle diameter 54mm - Spindle lock - Sliding support from the table - Motor 7.5kW Saw for cutting window bead: - Max blade diameter 200mm - Blade bore diameter 30mm - Blade adjustable front/back, up/down - Blade guard - Motor 2.2kW Feed: - Number of rollers 8 pcs - Motor approximately 0.55kW - Roller size 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Suction nozzle diameter 60mm, 2x130mm, 110mm, 100mm - Working pressure 6-8 bar - Dimensions (length/width/height) 3600x2100x1600mm, weight approximately 2500kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Length-cutting saw – Mortising spindle – Unpainted, used machine, very good condition Net price: 27900 PLN Net price: 6488 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7998 Technical data: - Spindle diameter 30mm - Spindle working height 120mm - Interchangeable spindle - Spindle locking - Adjustable up/down - Original cast iron guide with full adjustment - Original cast iron carriage with material clamping device + square - 4 types of rotation speeds + right/left 3000, 4500, 6000, 9000 rpm - Table dimensions 1020x1000mm - Square on the table - With brake - Motor 5.5kW - Dust extraction nozzle diameter 100mm, 120mm - Dimensions (L/W/H) 2200x1320x1310mm - Weight 966kg Advantages: - Made in Poland - Side carriage - Square on the table and on the side carriage - Used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates) Bsdpfx Ae Af U D Isiaolp