Used Heating Element for sale (16,925)

Condition: used, Year of construction: 2020, 1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent power cos φ=0.8: 2,483kVA, rated reactive power cos φ=0.8: 1,490kVA, rated current at cos φ=0.8: 3,584A, frequency: 50Hz, voltage: 400V, speed: 1,500/min, overspeed: 1,800/min, power factor (ind.-cap.): 0.8-0.95, efficiency cos φ=1: 97.4%, efficiency cos φ=0.8: 96.5%, moment of inertia: 117kgm², cable outlet: left, insulation class: H, temperature rise (at drive power): F, max. permissible ambient temperature: 40°C, weight: 6.752t, with documentation. An on-site inspection is possible. Tedpezvgg Tsfx Abtjb

Condition: used, Year of construction: 2021, operating hours: 20,000 h, functionality: fully functional, Two heat pumps available. (The photo showing both heat pumps is from installation; all other photos are current) - Each includes control cabinet - Heating operation only Tsdpfxewta T Rs Abtob - Low operating hours, see screenshots Installation and operating manual (including the data sheet) available in the attachment Price is per unit

Condition: used, Year of construction: 2012, Wood chip heating system Fröling TX 250, output 250 kW, year of manufacture 2012, including feeding auger with backfire protection, including automatic ignition, including automatic ash removal, including control system, including complete system documentation (operating manual, electrical diagrams, assembly instructions, etc.). The system must be dismantled by the buyer; a forklift is available. The system has previously been operated with pellets but is suitable for wood chips. Bunker discharge and chimney are not included! The system is fully functional! The object will be connected to a district heating network, which is why the system is being sold. Tjdpfjvgf Ibox Abtjb

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS Todpfx Aszwpnpjbteb hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: excellent (used), TETRA PAK SPIRAFLO – Aseptic Multitubular Heat Exchanger Aseptic multitubular heat exchanger TETRA PAK SPIRAFLO, designed for the continuous thermal treatment of liquid and viscous food products in industrial process lines. The Tetra Spiraflo system uses tubular heat exchange technology to perform indirect heating and cooling operations, keeping the product and the heating fluid separate. Its multitubular configuration makes it particularly suitable for pasteurization, UHT treatment, aseptic processing, heating, cooling, and heat recovery processes. MAIN FEATURES -Manufacturer: TETRA PAK -Series: Tetra Spiraflo -Type: Aseptic multitubular heat exchanger -Technology: tubular/multitubular heat exchange -Hygienic construction in stainless steel -Continuous thermal treatment -Indirect heating and cooling of the product -Multiple heat exchange sections -Sanitary connections -Suitable for pasteurization and UHT processes -Integrable into aseptic processing lines -Designed for continuous industrial use Tedpfozm U Nqex Abtsb APPLICATIONS Depending on the configuration of the installation, the Tetra Pak Spiraflo can be used for: Preheating and heating Pasteurization UHT treatment Aseptic processing Cooling Heat recovery Thermal conditioning prior to filling It can be integrated with process tanks, pumps, homogenizers, deaerators, holding tubes, aseptic tanks, and filling systems. Particularly suitable for the dairy, beverage, juice, processed fruit, sauce, and liquid food industries, and depending on its configuration, can be used with milk, juices, beverages, purees, concentrates, sauces, and other products that require controlled thermal treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: as good as new (ex-display), Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Manufacturer: Güntner Type: GVV050.1A/1-X.E Tjdpfx Abezk A Upotob Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Tjdpfx Abszu Ngastjb

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Tsdodmn Umjpfx Abtsb

Condition: used, Year of construction: 2004, Gathering element(s) Tedpfx Absira T Eotsb Kolbus ZU 804 Year: 2004 Description: - Number of elements: 1 - Number of gathering stations: 4 - ATC thickness control Size range: Max. 460 x 310 mm Min. 125 x 100 mm Mech. speed: up to 6.000 cycles/h

Condition: used, Year of construction: 2003, Gathering element(s) Kolbus ZU 804 Year: 2003 Description: Tsdpfx Absuf H Aretjb - Number of elements: 1 - Number of gathering stations: 4 - ATC thickness control Technical specifications: max. signature size 460 x 320 mm min. signature size 125 x 100 mm mech. speed: up to 8.000 cycles/h (price quoted is for 1 element, in total 6 elements available)

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Tjdpfxetwqzrs Abtsb

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Tsdpfx Abet R Tr Sjtob

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Tjdpfx Aboyvuuuetsb

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Todpfoxc Ni Rox Abtob

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Tjdpfezk I U Uox Abteb

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Tjdpforp E Nkox Abtjb

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Tsdpfx Abstphubjteb

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Tjdpfxsxnx E Sj Abteb

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Tjdpfxezpya Hs Abtob Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), DCN JetCook vessel500 litre 650 litres, direct from closed Babyfoods facility. Tjdpey I Di Sofx Abteb

Condition: excellent (used), We offer combined heat and power (CHP) units. For sale: Complete CHP unit, consisting of: • 2 × 20 kW Indop (gas) (Toyota Motor) • 5,000-liter buffer tank • All pipes and connections • Gas pipes • Heating pipes • Chimney (stainless steel) • 600-liter expansion tank • All circulation pumps • Control electronics • All sensors The entire system is fully functional and will be sold as a complete unit. Location: Slovenia. Tjdpfxjzr H I No Abtsb Price is negotiable.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, overall weight: 4,000 kg, fuel type: gas, power: 80 kW (108.77 HP), continuous power: 80 kW (108.77 HP), total length: 3,500 mm, total width: 800 mm, total height: 2,000 mm, motor manufacturer: MAN, CHP plant / Combined heat and power plant with MAN gas engine – manufactured in 2016. For sale is a combined heat and power plant (CHP) with a MAN gas engine and an APROVIS heat exchanger. Technical data: * Heat exchanger manufacturer: APROVIS Energy Systems * Year of manufacture: 2016 * Heat output of heat exchanger: 32 kW * Engine: MAN gas engine * Robust industrial design * Ideal for energy and heat generation The system is suitable as a source of spare parts, for refurbishment, or for continued industrial use. Tedpfx Aboznn Aaotjb Condition: Sold as shown in the pictures. Inspection possible by appointment. Electricity: 50 kW. Heating: 80 kW.

Condition: used, Year of construction: 1994, functionality: unexamined, nominal heat output: 120 kW (163.15 HP), Mawera boiler in dismantled condition, complete with control cabinet and material feed, located below the silo discharge point, including all fittings. Additionally, a new, unused material transport screw for the combustion chamber is available. Tjdpsztz Dnofx Abtsb Cash payment upon collection from the company premises – forklift available – individual parts may also be sold separately. We look forward to your interest.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Tsdpfx Abozi Tmajteb Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995. Tedpfozt Ip Rox Abtsb